ReviewsOptics Laser Cutting System

Gosky 1.25'' Metal Laser Collimator for Reflector Telescope Collimation - Adjustable 7 Brightness Levels

Designed for Reflector telescope, fit for standard 1.25 inch diameter. Red laser collimation beam with 7 brightness levels, wavelength 635-655 nm.
Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance..
The precision-made aluminium housing of the laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics..
Built with metal material. CR2032 Lithium Cell battery (Not include).
Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person..
The laser comes fully adjusted. It can however be further adjusted if required. It has three openings for adjustment, arranged at 120°, which are initially sealed. The battery for the laser can be exchanged at any time.
the small screw cap at the rear of the laser must be first unscrewed to allow this..

Check Stock

LIVANS American Flag USA Reflective Patch, Tactical Vest Reversed Patch for Left/Right Shoulder of Laser Precision Cuting Fit for Uniform, Tactical Vest, Police, Airsoft, Cap Hat

HIGH REFLECTIVE MATERIAL: Tactical Flag Patch adopts 3M non-metalized micro-prismatic retroreflective sheeting. Better daytime and nighttime brightness than common grade with beaded optics..
LASER CUT TECH: Tactical patch is made by precision cutting and bonding process on 500D nylon, make the edge of the pattern is neat and exquisite, built for maximum durability and use..
HOOK-FASTENER BACKING WITH USA Patch with hook and loop system allows you easily attachment to jacket, molle bags, operator caps, backpacks, and uniforms..
LEFT OR RIGHT SHOULDER YOU CAN CHOOSE: The package includes two left/right styles that allow you to change your patches freely on your shoulder when you wearing a jacket, uniform, and coat..
UNIVERSAL SIZED 2"*3.25": Perfect size for attaching to uniforms and the military. Loop backing makes them easy to take off before washes, increasing its durability. We offer 30-days money back of quality guarantee..

Check Stock

SCULPFUN S30 Pro 10W Laser Engraver with Auto Air Assist Pump & Nozzle, Cleaner and Faster Laser Cutter, Higher Accuracy Laser Engraving Machine, 10x Service Life, 36.8"x35.6" Expandable Working Area

...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to forgetting..
Powerful 10W Dual Laser Output: The S30 Pro laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 10mm wood and 5mm black acrylic in 1 pass. Capable of cutting high density materials such as 10mm walnut and 6mm MDF. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..

Check Stock

Simple Hollowing System with Laser - Stabilizes and Guides Woodturning Tools while Hollowing Wood, Accepts Full-Size Simple Woodturning Tools. (SHS with Laser)

WHATS INCLUDED: The articulating arm, the base mounting kit and the laser assembly. No tool are included in this kit..
WHAT DOES IT DO? Stabilizes and guides woodturning tools while hollowing and finishing giving you a confidence and ease of turning you never thought possible..
HOW DOES IT WORK? Silky smooth motion, stability and precise tool control means you’re free to concentrate on creativity with no worries of catches or vibrations while hollowing..
WHAT DOES THE LASER DO? Guides you to precise wall thickness at all times. Eliminates worries of cutting through the wall just as your bowl is complete. The commercial quality laser is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. When you begin hollowing the laser points mostly to the middle of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows..
HOW AND WHERe IS IT MADE? The entire Simple Hollowing System is made by Harrison Specialties in the Land of 10,000 lakes, Minnesota. All components are precision machined on an American made Haas CNC milling machine..

Check Stock

GENERAL INTERNATIONAL 7-1/4" Compound Sliding Miter Saw - 10A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3002

7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8.
POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials..
BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work..
ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts ..
DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts..

Check Stock

FLAGPOWER 420 Lumens Pistol Light Weapon Light with Strobe Function Laser Light Combo, Magnetic USB Rechargeable Tactical Flashlight Gun Light for Airsoft Handguns Pistol Rifle

BRIGHT FLASHLIGHT LASER COMBO: High quality Cree XML2 LED, 208m beam up to 1200 lumens. TIR optics produces a concentrated beam with optimum peripheral illumination. It is much brighter than most other similar models pistol light..
5 DIFFERENT LIGHTING MODES: The green laser flashlight combo has 5 modes : FLASHLIGHTONLY / LASER ONLY / STROBE ONLY/FLASHLIGHT + LASER/STROBE+LASER. The laser and flashlight can be used in combination at night, so that you can accurately aim at the target..
Magnetic Charging:Powered by rechargeable 500mAh/102026 Lithion battery with USB cable, can charged by common mobile phone charger.Ensuring a max runtime of 120 minutes when the light is set to 420 lumens..
Adjustable Rail and Risk Free Shopping Experience: This weapon light and laser combo fits rail-equipped pistols, rifles, shotguns and handguns,Please confirm the rail sizes greater than 1.18in./28mm. 60 days money back and 18-mouth manufacturer’s support!.

Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....

Check Stock

Alstar Alignment 1.25' Next Generation Laser Collimator for Newtonian Telescopes

...he laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics..
Built with metal material. CR2032 Lithium Cell battery (Not include).
Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person..
Designed for Reflector telescope, with removable 2" adapter both fit for standard 1.25 inch diameter and 2 inch diameter. Red laser collimation beam with 7 brightness levels, wavelength 635-655 nm.
Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance..

Check Stock

Jigsaw, Meterk Upgraded 800W 6.7 Amp 3000 SPM Jig Saw with Laser Guide & LED, 6 Variable Speed, 4PCS T-Shank Saw Blades, Scale Ruler, 78.74 Inches Cord, 45Bevel Cutting Angle

Laser Guide + Guide Ruler + LED Precision Cutting -Equipped with the newly introduced laser guide plate and guide ruler, built-in laser guides your cutting line, which can make you arrange the wire more accurately.
with LED lights, LED lights The front area, ensuring visibility and precise cutting even in dim light, allows you to work in the dark conveniently..
6 Variable Speeds & More Powerful -800W copper motor drives it to 3000SPM with 6 kinds of adjustable speed to help you cut various applications and finer thick materials (maximum cutting depth wood: 100mm Iron: 10 mm), 6-bit variable speed allows you to control the cutting speed and accuracy, and handle various applications and materials with higher accuracy. Equipped with fan thermal cycle system, faster heat dissipation capacity makes the motor more durable..
4 Orbital Setting & Bevel Cutting -Equipped with 4-position track setting, can cut faster, saving your energy and time.
adjustable bevel angle (-45 to 45 ) can be used to complete the difficulty Work, the wrench can / can be stuck on the jigsaw, so you wo nt easily forget or misplace it. The aluminum base can ensure smooth cutting, the aluminum design is more wear-resistant, and the protective pad can reduce the scratching of the workpi....

Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Cutter and Engraver Machine, Deep Cutting for 15mm Wood, 0.06mm Ultra-Fine Compressed Spot Cutting Machine, Eye Protection Fixed-Focus

【High Precision & Superb Penetration】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm thick plywood, 10mm thick dark acrylic, engraved ceramics, and stainless steel..
【Safety Protection Design】The laser cutter and engraving machine are equipped with a very convenient power switch, which is not available in others. The laser filter cover filters 98% of the UV light to the eyes, you can watch laser engraving without wearing goggles and prevent animals from catching the laser spot. Comes with a steel pad that can protect the table from laser damage, and isolate fire hazards..
【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL (free), LightBurn (paid), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Mac system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. (You can view the software operation tutorial in the video).
【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design make....

Check Stock

Astromania Alignment 1.25' Next Generation Laser Collimator 2' Adaptor for Newtonian Telescopes

...ble 2" adapter both fit for standard 1.25 inch diameter and 2 inch diameter. Red laser collimation beam with 7 brightness levels, wavelength 635-655 nm.
Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance..
Built with metal material. CR2032 Lithium Cell battery (Not include).
Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person..
The precision-made aluminium housing of the laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics..
This adjustment tool can be used in all 1.25" focusers. We provide you with precise instructions in German and English, with a step-by-step explanation of how to adjust a Newtonian telescope using this laser unit. So, even if you are a newcomer to amateur astronomy, it is very simple to get the optimum per....

Check Stock