ReviewsOptimal Exhaust Flow

Nightrider XiED Fuel Enrichment for EFI Harley-Davidson Plug - n - Play DK-XiED-NR

  • The Plug-n-Play XiED richens the Air Fuel Ratio from 14.6:1 to 13.8:1 in closed loop mode. Simple install-comes with instructions. No tools required,....
  • Immediate Benefits: Lower Engine Temperature - Lower Exhaust Temperature - Improved Throttle Response - Reduced Surging - Reduced Pinging.
  • Recommended for: Stock Configuration - High flow air cleaner - High flow exhaust - "Stage 1" (both high flow exhaust & air cleaner).
  • The XiED's are a cost effective alternative to an aftermarket tuner & dyno runs..
  • XiED's will cool your bike down and make it run better.
Check Stock

Nightrider FL-XiED Fuel Enrichment for Harley EFI Plug - n - Play DK-FLXiED-10-NR

  • The Plug-n-Play FL-XiED-10 richens the Air Fuel Ratio from14.6:1 to 14.0:1 in closed loop mode..
  • Immediate Benefits: Lower Engine Temperature - Lower Exhaust Temperature - Improved Throttle Response - Reduced Surging - Reduced Pinging.
  • Recommended for: Stock Configuration - High flow air cleaner - High flow exhaust - "Stage 1" (both high flow exhaust & air cleaner).
  • The FL-XiED-10's are a cost effective alternative to an aftermarket tuner & dyno runs. .
  • FL-XiED-10's will cool your bike down and make it run better..
Check Stock

ABN Exhaust Hanger Removal Pliers – 11In Rubber Exhaust Hanger Removal Tool Grommet Puller Muffler Rubber Hanger Plier

  • SERVICE YOUR EXHAUST SYSTEM: Use the ABN Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system.
  • Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
  • OPTIMAL LEVERAGE FOR EASY USE: 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas.
  • Compatible with most import and domestic vehicles that use exhaust hanger supports.
  • EASY TO USE: Place the faceplate against the rubber hanger around the metal bracket.
  • Align the 3/8 x 7/8 inch (.9 x 2.2cm) extension knob against the metal bracket then compress the muffler hanger pliers to push the bracket through the rubber hanger.
  • BUILT TO LAST: High carbon steel exhaust hanger pliers provide maximum strength, durability, and leverage.
  • Plier faceplate features .8 inch (2.1cm) opening to fit around your metal hanger brackets and against your rubber hanger grommet.
  • COMFORTABLE GRIP: 11-inch (27.9cm) long muffler hanger removal tool rubber hanger pliers feature 4-inch (10.2cm) rubber-dipped grip handles that provide comfort and a secure hold while yo....
Check Stock

Mophorn Catalytic Converter Compatible with 2003-2007 Honda Accord EX/LX/DX 2.4L L4 Direct Fit High Flow Series Cat Converter Stainless Steel Exhaust Manifold Pipe with Gasket (OBD III Compliant)

  • OEM High Flow Design: This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design provides more oxygen to your engine, dramatically improving your exhaust system. Further, an internal honeycomb structure effectively purifies the waste gases, converting CO, HC, and NOx into CO₂, H₂O, and N₂..
  • Stainless Steel Structure: The high flow catalytic converter is assembled with a stainless steel body for long-term use, capable of enduring high-temper gases from the exhaust. Its internal ceramic substrates contain high-load precious metal catalysts, including Pt, Rh, and Pd, to enhance purification efficiency and intensity..
  • Hassle-Free Installation: Our free-flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in the exhaust system without extra modification. The kit also comes with gaskets and hardware for replacement. Professional installation is highly recommended for exerting its max capability..
  • Standard OBD III Compliant: This high flow converter complies with OBD III Standards, ensuring the exhaust emissions meet the Federal Emission Standards. However, it is illegal to be used in California as the NON-CARB compliant. With this high-quality converter, you ....
Check Stock

Yonaka 4-1 Polished Stainless Steel Header Compatible/Replacement for Honda Acura B-Series

  • STAINLESS STEEL CONSTRUCTION - Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing....
  • SHORTY HEADER DESIGN - 4-1 shorty header design increases high flow air. The bent shape is helpful to the unrestricted flow along the entire flow....
  • HIGH PERFORMANCE - It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders. More....
  • EASY INSTALLATION - Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary. 1 X pair of exhaust....
  • FITMENT - Headers may need to be clearanced if using the stock steering shaft, not compatible with factory AC components Compatible with 91-04 GMC....
Check Stock

Mophorn Catalytic Converter Direct Fit Front Exhaust Manifold High Flow Catalytic Converter Compatible with Subaru Impreza Legacy Forester Outback 06-12 4 Cyl 2.5L Except Turbo W/Gasket Kit

  • OEM High Flow Design: This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design can provide more oxygen to your....
  • Stainless Steel Structure: The Subaru exhaust header set with a stainless steel body, can endure high-temper gases from the exhaust. Its internal....
  • Bolt-on Installation: The high flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in the....
  • Standard OBD IV Compliant: To ensure the exhaust emissions meet the Federal Emission Standards, this free-flow catalytic converter is compliant with....
  • Vehicle Compatibility: Our high-quality Subaru converter is compatible with the 2006-2010 Subaru Forester, 2006-2011 Subaru Impreza, 2006-2012 Subaru....
Check Stock

Ventline V2270-50 Breeze 360 Exhaust Fan - Non-Lighted, 50 CFM

  • ...ration and High-quality Performance. Compared with Ordinary Motors, the Upgraded Motor Can Reduce Friction Coefficient, Save Electricity Effectively and Enlarge the Service Life of the Machine.
  • 【OVERHEAT PROTECTION】Adopting an Axial Pipe Fan, Stronger Wind Design, Effectively Reduce Heat Generation, Can Realizes Optimal Cooling Effect.Built-in Overheating Protection Device Cuts off the Contacts when the Motor is Overheated, Which Plays a Role of Power Failure Protection.
  • 【8 INCH PARAMETERS】Dimension:25 x 15 x 20cm/9.8 x 5.9 x 7.9inch.
  • Air Flow: 735 CFM, Power:80W, Voltage: 110V, Frequency: 60Hz, Speed: 2800r/ min.
  • 【NOTE】Two Wiring Methods:1.Blue to Black (L),Brown to White (N ),Yellow to Green (E) 2.Blue to Black (L),Blue to White (N ),Yellow to Green (E), Without Screws,Without Plug.
Check Stock

Elite-Air FAT2 220 CFM Dual Fan Crawl Space Ventilator With Dehumidistat

  • Bathroom exhaust fan with revolutionary ECM motor and SmartFlow Technology for optimal CFM output.
  • Built-in Pick-A-Flow airflow selector allows you to select an airflow of 50, 80, or 110 CFM for your vent fan with the flip of a switch.
  • Single-hinged Flex-Z Fast bracket provides flexible, fast, and easy bathroom ceiling installation.
  • Vent fan with low-profile 5-5/8 housing depth that fits in 2 x 6 joist size or larger.
  • This Vent Fan Can Be Used To Comply With Ashrae 62.2, Leed, Iap, And California Title 24.
Check Stock

Mophorn Exhaust Manifold 05-11 Nissan Frontier Exhaust Manifold Bolts Gasket Combination 4.0L OEM Quality High Flow Catalytic Converter for 2005-2011 Nissan Frontier/Xterra/Pathfinder(EPA Compliant)

  • OEM High Flow Design: These catalytic converters are constructed to meet or even exceed OEM quality and have EPA certification. The high flow design provides more oxygen to your engine, dramatically improving your exhaust system. Further, an internal honeycomb structure effectively purifies the waste gases, converting CO, HC, and NOx into CO₂, H₂O, and N₂..
  • Stainless Steel Structure: The high flow catalytic converters are assembled with stainless steel bodies for long-term use, capable of enduring high-temper gases from the exhaust. Their internal ceramic substrates contain high-load precious metal catalysts, including Pt, Rh, and Pd, to enhance purification efficiency and intensity..
  • Hassle-Free Installation: Our free-flow catalytic converters have standard specification flanges designed for easy installation. Direct bolts exist in the exhaust system without extra modification. The kit also comes with gaskets and hardware for replacement. Professional installation is highly recommended for exerting its max capability..
  • Standard OBD III Compliant: These high flow converters comply with OBD III Standards, ensuring the ....
Check Stock

Panasonic FV-08WQ1 WhisperWall Bathroom Fan, Thru-the-Wall Ventilation, 70 CFM

  • Bathroom exhaust fan with revolutionary ECM motor and SmartFlow Technology for optimal CFM output.
  • Built-in Pick-A-Flow airflow selector allows you to select an airflow of 50, 80, or 110 CFM for your vent fan with the flip of a switch.
  • Single-hinged Flex-Z Fast bracket provides flexible, fast, and easy bathroom ceiling installation.
  • Vent fan with low-profile 5-5/8 housing depth that fits in 2 x 6 joist size or larger.
  • This Vent Fan Can Be Used To Comply With Ashrae 62.2, Leed, Iap, And California Title 24.
Check Stock

Short Stainless Steel Elbow, 2.5in 90 Degree Stainless Steel Exhaust Pipe Mandrel Bend Elbow Tube Car Accessories Exhaust pipes and fittings

  • 【Improve Air Flow】: Exhaust Pipe 90 Degree can improve your vehicles air flow with this mandrel bent exhaust components, good performance..
  • 【Easy to Install】: High‑quality exhaust elbows can work well on your car, easy to install, bring you convenience..
  • 【Premium Material】: Exhaust Pipe is made of stainless steel material, sturdy and firm, no rust and wear‑resistant, durable for use..
  • 【Wonderful Replacement】: Wonderful replacement for the old or broken one, stable structure, important and necessary accessory..
  • 【Fine Workmanship】: Simple and elegant appearance, exquisite workmanship, with strict quality control and quality assurance, can be used with peace of mind..
Check Stock