ReviewsOptoma Ds32projectors

ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

  • Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling.
  • fits Epson, Optoma, Benq, Viewsonic and most other projectors.
  • Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch.
  • projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
  • Includes an AMERICAN WRITTEN installation manual with illustrations and photos.
  • Includes scissor clamp and one 8 inch aluminum suspension rod, and screws.
  • maximum spider mount leg span is 12 inches, mount hole to mount hole.
  • it is shown for demonstration purposes only.
Check Stock

BL-FP240D Replacement Projector Lamp with Housing for Optoma HD50/HD161X/HD50-WHD/HD161X-WHD

  • 5000 hours life time and 180 days warranty 30 days free return..
  • This lamp is premium quality , use ultra high efficiency lamp burner ..
  • Replacement lamp with housing for Quick and Easy installation..
  • The woprolight projector lamp is designed to replace the projectors included:.
Check Stock

StarTech.com Universal Projector Wall Mount - Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg) - Tilt/Swivel/Rotate - Adjustable 16.5" to 27.7" from Wall (PROJWALLMNT)

  • UNIVERSAL PROJECTOR WALL MOUNT: Supports short throw & ultra-short throw projectors w/ mounting hole pattern ranging up to 12.8" (325mm) in diameter.
  • ADJUSTABLE PROJECTOR MOUNT: Supports both short and ultra short throw projectors.
  • The arm allows you to position a projector between 16.5" & 27.7" from the wall (w/ incl tools) to adjust throw ratio.
  • PRECISE ADJUSTABILITY: Easily optimize projector placement with 3 color coded dials for +/-10 swivel, +/-5 tilt (pitch), +/-10 rotate (roll).
  • BRAND COMPATIBILITY: Projector wall mount compatible w/ projectors from brands like BenQ, Acer, Optoma, Eiki, Hitachi, Sanyo, NEC, Epson, Sony, LG & Dell among others (several screw sizes incl).
  • THOUGHTFUL DESIGN: Heavy duty steel & aluminum construction, this wall projector mount/holder kit supports in-wall cable routing & integrated cable management.
Check Stock

Mini Projector Wall Mount/Projector Hanger/CCTV Security Camera Housing Mounting Bracket(White) - for CCTV/Camera/Projector/Webcam - with Load 11 lbs Length 7.8 inch - Rotation 360° (White)

  • MINI PROJECTOR MOUNT: Short length just 7.87in/20cm, but strong enough. Perfect for mini studio, DBPOWER Epson, Optoma, VIVIBRIGHT, ViewSonic, InFocus Mini Projectors(one mounting hole)..
  • ADJUSTABLE WALL HANGER: Quality Material, Carbon Steel. Around 11 lbs loading capacity with 360 degrees horizontal rotation projector mount head and 60 degrees vertically adjustable projector mount head..
  • ATTRACTIVE APPEARANCE: Nice appearance in wall white with solid construction and screws needed. Perfect for the Home, Office or Classroom..
  • EASY TO SETUP: Just drilled in 3 holes into the wall and set up the projector to your desired position then it was done..
  • WARRANTY: Lifetime Warranty to protect your projector against defects and damage.Pls, let us know any problem! We will try our best to serve our dear customers!.
Check Stock

iShot Pro Pocket Projector Tripod Floor Stand Holder & 360° Swivel Ball Head Bundle Kit - Adjustable Height 29.5 - 77 TSBH-8846

  • Fits any Pocket Projector Model with Standard 1/4-20 Threads on the bottom - Height: Min-30" Max-77".
  • Lightweight Portable and Fold-able High Quality and Solid All Aluminum Metal Design Tripod Stand and Ball Head.
  • Fluid Movement Pro Medium Ball Head Provides 360 Movements with "Quick Tightening" Locking Lever.
  • Easy Setup - Find the Perfect Angle Every-time in Seconds - Give your next presentation a more professional look!.
  • For Pocket Projector Models: Brookstone Epson Optoma AAXA Telstar Mini Pico Projector HDMI DLP LED and More (Please Note: This is not recommended for....
Check Stock

NIERBO Universal Projector Wall Ceiling Mount Hanger 360°Rotatable Head with Extendable Length 11.8 Inch to 19.7 Inch / 11 lbs Load Mounting Bracket

  • Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 13.4 inches or less. This mount can be used on flat and sloped up to 55°ceiling..
  • High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 33 lbs. (15kg)..
  • Adjustable Full Motion Mount: Our projector ceiling mount can tilt 15 degrees from left to right, tilt 15 degrees from front to back and 360 degrees rotation, hitting all possible viewing angles. Holds projector at 5 inch from the flat ceiling..
  • Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts..
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands..
Check Stock

3D Glasses Active Shutter Rechargeable Eyewear for 3D DLP-Link Projectors Cocar Toumei - Pack of 2

  • Active shutter 3D glasses for 3D DLP-Link projectors. Rechargeable design, with ON/OFF switch..
  • Work with all 3D DLP Link technology projectors such as Acer, BenQ, Optoma, Viewsonic, Philips, LG, Infocus, NEC, Jmgo, Vivitek, Cocar, Toumei..
  • Charging time: 2 hours. Working time: 40 hours. Available Distance: 8M. Totol width: 130mm, Glass height: 26mm, Glass width: 50mm, Nose bracket width:....
  • Warranty: 12 months. Free replacement or 100% money back..
Check Stock

Quiet Marketing: A Calm, Minimal Approach to Business and Online Visibility for Highly Sensitive Solopreneurs

  • Compatible Models: BL-FU310B with housing, fully tested before leaving the factory..
  • This is an economical bulb, new type of luminescent electrode, a cost-saving option..
  • 2500 hours life, 4000 hours in ECO mode, 4700 lumens brightness..
  • Araca offers a 200-day warranty and if the bulb fails, we will immediately replace it for free or give you a refund..
  • Projector Model: fit for OPTOMA EH500 X600 DH1017 DH1014 Projector Lamp..
Check Stock

New Replacement Remote Control Applicable for Optoma Projector HD26 Gt1080 HD141X HD143X HD142X

  • New Replacement Remote Control Applicable for Optoma Projector HD26 Gt1080 HD141X HD143X HD142X. Please make sure your projector model is listed, otherwise this remote is not compatible with it. This remote is powered by AAA ALKALINE batteries, please do not use rechargeable batteries..
  • Please make sure your projector model is in the compatible list of our remote, otherwise it is not compatible. No programming or paring is needed.Just install new batteries and it is ready for use. If your device model is not in the compatible list, please contact us before order..
  • Power Supply: 2X 1.5V AAA Alkaline Battery. Batteries and manual are not included..
  • Please feel free to contact us if you have any query, thanks!.
Check Stock

Projector Mount, Projector Ceiling Mount, Projector Wall Mount, Ceiling Projector Mount,Universal Projector Ceiling Mount, Projector Stand Adjustable,Projector Mounting Bracket,Wall Projector Mount

  • GREAT PROJECTOR MOUNTS: The ceiling mount for projector saves on space and offer perfect viewing positions. The white powder-coated finish blends well with the majority of home and office environments, Compatible with Epson/Emerson/BenQ/Fangor/Vankyo/Acer/Artlii/Optoma and most projectors..
  • VERSATILITY DESIGN: Newly Designed 3-In-1 retractable projector mounts from ceiling, including Flush Ceiling Installation.
  • Wall Installation. Mounts to Wood studs, concrete and wall surfaces, flat ceiling, drop ceiling, suspended ceiling, etc..
  • STABILITY AND DURABILITY: This wall mount projector bracket, with solid construction made entirely of high grade steel, supporting projectors up to 40 lbs. Projector mount wall keeping your expensive equipment safe and secure..
  • EASY TO ADJUST: The projector holder is fully adjustable with +/- 8 degree tilt, +/-15 degree swivel, and 360 degree swivel, hitting all the right viewing angles. The projector ceiling mount adjustable height extending Arms could reach from 8.85 inches to 12.44 inches..
  • EASY TO INSTALL: Projector mount ceiling adjustable is easy installation with quick release hooks that attach and detach by tightening and loosening mounting bolts. All necessary hardwares and in....
Check Stock

Goswot 144Hz Rechargeable DLP Active Shutter Eyewear for Optoma Acer Vivitek Dell LG and All The Other DLP-Link Projectors(Pack of 8)

  • Fully Compatible with all DLP Link 3D Projectors(e.g. Optoma Acer Vivitek Dell LG and All the Other DLP-Link Projectors).
  • Operating time for one full charge: 30- 40 hours.
Check Stock