ReviewsOrico Nvme M Ssd Enclosure

DOCKCASE Visual Smart M.2 NVMe SSD Enclosure,Support 10s PLP Prevents Write Data Loss,USB 3.2 Gen 2 Type-C (10 Gbps),fits NVMe PCIe/SATA NGFF Size 2230/2242/2260/2280,Support M-Key B+M Key UASP

➤Support SSD Life Prediction and Identify the Authenticity of Information to Avoid Buying Inferior Disks: DOCKCASE – The first smart SSD enclosure with an HD display screen, can complete the intelligent detection of SSD when the Smart SSD Enclosure is powered on. DOCKCASE can timely detect and display the SSD health status after power-on, disk life, disk power-on times, and remaining capacity at a glance. Safer data, more assured work..
➤Support Hot Swap, Can Provide 10s PLP Prevent Writing Data Loss: The Power Loss Protection of DOCKCASE Smart SSD Enclosure provides around 10 seconds of writing time after power failure (the actual time will be affected by the working state and power consumption of the SSD), no data loss, no disk damage..
➤Sopport 10 Gbps HIGH SPEED: DOCKCASE M.2 NVMe SSD external case adopts Realtek RTL9210B control chip and latest USB 3.1 Gen 2 Type-C interface. Support UASP acceleration protocol and support theoretical data transmission speed of up to 10Gbps. When using high-performance NVMe media, the read/write performance can exceed 900 Mbytes/sec. Included USB-C to USB-C and USB-C to USB-A cables, works with USB-C/USB-A hosts..
➤Compatibility: DOCKCASE M.2 to USB enclosure fits NVMe PCIe/SATA AHCI NGFF size 2230/2242/22....

Check Stock

ORICO 2.5 External Hard Drive Enclosure USB 3.0 to SATA III Tool-Free Clear Hard Disk Case for 2.5 inch 7mm 9.5mm SATA HDD SSD Max 6TB Support UASP 2139U3

Easy to See Which Drive Inside - ORICO 2.5 hard drive enclosure made of high-quality transparent crystal PC material. The clear ssd case design allows....
Portable Hard Drive Enclosure - ORICO external hard drive case can easily hook up your old 2.5inch SATA I/II/III hard drive to transfer files from one....
Super Easy to Use - Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close....
SuperSpeed USB 3.0 with UASP - The SATA interface of the 2.5 ssd enclosure supports UASP SATA III transmission protocol, which is 70% faster than....
Wide Compatibility - This ORICO SATA hdd enclosure helps to connect your 2.5inch SATA I/II/III hard drive SSD to PC, Laptop, TV and PS4. The hard....

Check Stock

ACASIS NVMe M.2 Duplicator Dual-Bay Offline Clone USB C to NVME Docking Station for M2 SSD M Key Hard Drives Enclosure [Support 8TB]

...e ‘Clone’ button for 3-5 seconds to quickly clone all files from ‘A’ SSD to ‘B’ SSD, there are LED status indicators and the process completed quickly. NOTES: make sure the capacity of target M.2 NVME ssd larger than original M.2 NVME ssd..
[High Speed and Performance] This dual-bay nvme duplicator drive enclosure enables 10Gbps super speed data transfer, with 992Mb/s write/read speeds for most M2.NVME SSDs. It took about 4 minutes to clone a 256GB m.2 SSD to a 2TB one as tested.Support an SSD with capacity up to 8TB..
[Friendly Humanized Design] ACASIS versatile M.2 NVMe duplicator support Smooth plug and unplug. No need to use any tools or screws. Adopted Aluminum alloy material design, can quickly dissipate heat and protects the hard disk when in use..
[Before Perchase] 1,ACASIS NVMe duplicator support two M.2 nvme ssds(2230,2242,2260,2280). NOT support SATA ssds. 2, When using the Offline Clone Duplicator, please make sure the capacity of target M.2 NVME ssd larger than original M.2 NVME ssd. 3, For any problem, feel free to contact our customer service team for a satisfactory solution..

Check Stock

ineo M.2 NVMe (PCIe) SSD USB 3.2 Gen 2 Type-C Aluminum Enclosure [C2592-NVME]

Sturdy and one piece aluminum case for premium look and efficient heat dissipation.
Integrated USB C cable for sorting the enclosure more easily and without worries about missing cable.
Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230.
Only for M.2 NVMe / PCle SSD M Key, Not support NGFF / SATA SSD..

Check Stock

USB C 3.2 MacBook SSD Enclosure for 12+16 PIN MacBook Air/Pro SSD, Aluminum M.2 NVMe MacBook Pro Enclosure Adapter Support MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017

⚡⚡【Designed for MacBook】USB 3.2 Gen 2 Apple ssd enclosure compatible with 12+16 PIN MacBook Air/Pro SSD, also compatible with Toshiba MacBook SSD/Toshiba MacBook SSD 656-0021A and OWC Macbook SSD, compatible with 2013/2014/2015/2016/2017 MacBook Air Retina/Macbook Pro/IMac, equipped with adapter to support M.2 NVMe SSDs..
⚡⚡【Extremely Fast Data Transfer】Macbook pro ssd enclosure is equipped with USB 3.2 Gen 2 interface, the average transmission speed is 10Gbps, USB 3.2 Gen 2 nvme ssd enclosure can also reach 20Gbps through USB 3.2 Gen2x2, which is very suitable for transmitting large files, and it only takes a few seconds to complete large files. save and transfer..
⚡⚡【Advanced Heat Dissipation Technology】Macbook ssd enclosure adopts aluminum alloy design, which has better thermal conductivity than traditional ABS material. At the same time, the shell is designed in a fish scale shape, which expands the thermal conduction area, improves the thermal conduction effect, and is easier to hold..
⚡⚡【Compatible Systems】USB 3.2 Gen 2 Macbook air ssd enclosure is compatible with Windows7/8/10/11, Mac OS 10.0, Linux 2.6 or later. Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro..

Check Stock

ACASIS 40Gbps NVMe Enclosure, M.2 Enclosure Compatible with USB 4/3.2/3.1/3.0/2.0, SSD Enclosure Support Up to 8TB Size 2280 M&B+M-Key, Aluminum Alloy External NVMe Enclosure USB C Enclosure

【UPGRADED TBU401 TOOL-free & Plug and Play】No screw or screwdriver is required. This m.2 enclosure is lightweight, luxury and compact. You could easily pull the back-shell off or put it back with your hand. It ONLY supports M KEY and B&M KEY SSD with size 2280..
【IMPROVED Heat Dissipation】With aluminum alloy material and waved hollowing outer casing, this SSD enclosure has a great heat dissipation, long-lasting performance. Additionally, this nvme enclosure coms with a thermal pad for better heat dissipation..
【Smooth top and bottom surfaces】This ACASIS 40Gbps m.2 nvme ssd enclosure features wtih smooth top and bottom surfaces, which will appropriately prevent scratching the surface contacted, provide you a nice experience..
【Compact and Portable】The product dimension is 3.9*2.4*0.56inch and weights 0.37lb, which is convenient for travel use..
【Superior Speed M.2 Enclosure】Our ACASIS 40Gbps nvme enclosure is fully compatible with USB4.0 and downward compatible with USB3.2/3.1/3.0/2.0. The enclosure speed test for the Samsung 980 PRO 250GB is 2805mb/s for....

Check Stock

Unitek M.2 NVME SSD Enclosure Adapter, 3 Port USB Hub for PS5, USB 3.2 Gen 2 10 Gbps M.2 NVME PCIe Enclosure, Support UASP Trim for M and B&M Keys SSD Size 2242/2260/2280

【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
【User Friendly】2 USB-A male ports + 1 USB-A female port +1 M.2 tank. This small usb hub for PC, PS5, PS4, keyboard, mouse and other USB-A devices. perfectly fitting with PS5 Digital Edition & Ultra HD game console.Expands your game console ports and use one USB-A equipment. Install in seconds, plug-and-play, no driver needed, no external power requested, and hot-swappable support. Small and portable, aluminum shell is sturdy and durable, easy to c....

Check Stock

M.2 SSD NVMe Enclosure Compatible for PS5, Alxum M.2 PCIe NVMe Enclosure USB3.2 Gen2 10Gbps, External NVMe Expansion Enclosure with USB Port for PS5/ PS4/PC - PS5 Console-Mounted Design, Tool-Free

【External Storage Expansion for PS5】 Alxum External NVMe SSD Enclosure can be mounted perfectly on the USB ports of the PS5 console, it is stable and won't drop after connecting to PS5 console. No screws & external USB cable needed, purpose-built for PS5 user who aims to adding extra storage for PS5 console and avoid the clutter of usb cables..
【M.2 NVMe SSD Compatibility】Alxum NVMe SSD adapter support multi-size of M.2 SSD specifications (2242/2260/2280 SSD.
M.2 M-Key and B&M-Key socket). Compatible for NVMe protocol SSD in 250GB/500GB/1TB/2TB/4TB. Enable you to play PS4 games directly from the external USB expansion storage and store some PS4/PS5 games you don't play for a while, which save more free space for your PS5 games in the P5 console storage..
【10 Gbps Ultrafast Transmission】Support SSD TRIM instruction and UASP acceleration which can effectively improve the R/W speed and extend the lifetime of SSD. With USB3.2 Gen2 specification over the dual USB-A connectors, data transfer rate up to 10Gbps. Backward compatible with USB3.0/ 2.0/ 1.1. Compatible with multi operating system, Windows / Linux/ Mac. (To better compatible with NVME protocol, we suggest using the OS in Windows10).
【2-in-1 NVMe Enclosure with USB-A Port】Provide....

Check Stock

SSK Aluminum USB 3.2 Gen 1 to M.2 SATA NGFF SSD Enclosure Adapter, External SATA Based M.2 Solid State Drive Enclosure Reader (for M.2 SATA SSD only)

【Applicable SSD】– This M.2 SSD Enclosure supports SATA-based M.2 NGFF(B Key/B+M Key) SSD 2242 2260 2280mm solid state drivers, Not supports NVMe/PCIe M.2 M Key SSD.
Before purchasing, please check your SSD label, if it prints PCIE, NVME, this enclosure will not support.
【Type C interface】- This M.2 SATA SSD Reader both side can be inserted.
USB 3.2 Gen 1 5Gbps high speed transmission,Type c Adapter meets all of your type c computer and mobile needs.
【Aluminum Alloy Shell】- This M.2 SSD Adapter Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear.
【High Quality Master Chip】- Adopts high performance controller IC, compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC..

Check Stock

ACASIS 40Gbps M.2 NVMe SSD Enclosure, Upgraded Sturdy 8TB USB-C Aluminum External Hard Drive Enclosure, for M1 Pro/Max Mac, Support 2280 B+M M-Key PCIe, Compatible with USB4/3.2/3.1/3.0/2.0

...HEAT DISSIPATION. New corrugated outer casing design for better heat dissipation. New look new style, add more fun to your work or your entertainment..
LIGHTENING-FAST 40Gbps. Speed test with Samsung 980 EVO Plus on Macbook Pro, the Read / Write speed of ACASIS 40Gbps nvme enclosure reaches up to 2805MB/s / 2734MB/s( If your SSD does not support NVMe protocol, the speed will not exceed 600MB/s, Different speed may vary from different system also)..
Smaller and more portable. The size of the Aluminum External Hard Drive Enclosure is 10*6.1*1.45cm, small, exquisite, and easy to carry, making this M.2 nvme enclosure a good work and life partner. Equipped with 40gbps data cable, Let you have a super high-speed experience at any time..
Extensive Compatibility. ACASIS M.2 NVMe SSD Enclosure built-in Intel JHL7440 chip, adopts dual-chip master control,equipped with 40Gbps Type-C interface.The NVMe Enclosure compatible with USB 4/3.2/ 3.1/ 3.0/ 2.0 at respective speed limits to meet a variety of work and daily needs..
Plug and Play. This M.2 NVMe Enclosure supports M1 Pro/Max Mac devices a....

Check Stock

Willhom M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

1* M.2 NVME SSD Convert Adapter Card + 1* Screwdriver + 3* Screws included. The NVME SSD Convert Adapter is DIY kit for assembling an upgraded SSD replacement for MacBook with large capacity NVME SSD. ( DO NOT fit external SSD enclosure ).
Compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
Require macOS 10.13 High Sierra or Later, NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrade your macOS before installation.
Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on..
Tips: macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.

Check Stock