ReviewsOrifice Flanges

Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300

  • Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
  • The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
  • Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
  • LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
  • Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
  • and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

Tool Daily Pressure Washer Sandblasting Kit Wet Sandblaster Attachment 5000 PSI 1/4 Inch Quick Disconnect Orifice 3.0

  • Orifice 3.0. Minimum Flow Rate: 2.5 GPM. Minimum Pressure: 2700 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5,....
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input)....
  • Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack".....
  • Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

Maymom Flange 15mm Inserts Compatible with Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony, to Reduce 24mm Down to 15 mm; 2pc/Each

  • Maymom 15 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 15 mm. Also compatible with Momcozy/LegendairyMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups ( NOT for 27 mm M1 cups).
  • Also fits Freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Willow Pump Willow Go™ Wearable Breast Pump Flange Set, 2 Pack | Breast Shield for Hands Free, Cord Free Double Electric Breast Pump | Clear, 24mm

  • REUSABLE FLANGES: Flanges are clear colored for nipple visibility and alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into Willow Go Reusable Breast Milk Containers and easily transfer to a storage container or bottle when you’re ready to feed..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm. In addition, 24mm flanges are compatible with sizing inserts for mamas who measure smaller than 21mm..
  • EASY TO CLEAN: Dishwasher-safe for easy cleanup..
  • USE WITH THE WILLOW GO PUMP: Exclusively designed to work with the Willow Go Wearable Breast Pump..
Check Stock

Maymom Flange Inserts 19 mm for Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony to Reduce 24mm Nipple Tunnel Down to 19 mm; 2pc/Each

  • Maymom 19 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 19 mm. Also compatible with Momcozy/LegendaryMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra – Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups (not for 27 mm cups).
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle, Universal Thread Tips for Snow Foam Lance, 2-Pack

  • Universal orifice nozzle to generate thick foam inside foam cannon, 2-pack.
  • Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI..
  • If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover..
  • Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch

  • Tool Daily 1/4" quick disconnection Foam Cannon with white container bottle and additional orifice nozzle 1.1 mm for foam sprayer. Container bottle has bigger mouth to easily fill in and extra-wide neck to prevent crack issue..
  • EASY to install: fill some soap into the bottle with warm water to get thick foam.
  • Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3600 PSI. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam..
  • Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs.
  • Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines f....
Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
  • Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock