ReviewsOrifice Plate

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

Automotive A/C orifice tube remover tool kit allows removal of orifice tubes before flushing.
Speeds A/C service by removing the build-up of particulates on the orifice screen and restrictions that slow the flushing process.
The basic tool works on General Motors and Ford vehicles and comes with additional adapters for specific applications.
Ford: extender body for 1985 and newer models.
General Motors: 1989-91 GM 'J', 'L', and 'N' car adapter, and 1991 and newer 'C' and 'K' series truck adapter (for trucks with No. 3096068 orifices).

Check Stock

Grill Heat Plate Shield Tent BBQ Parts Replacement for Huntington 24025HNT Master Forge 30030MSF Fiesta Cook-Rite EL30034 Stainless Steel Burner Cover Flame Tamer 19 9/16 Heat Shield

【Fits Perfectly】- Grill Repair Parts Kit fit for Grill Model Broil-Mate 24025BMT, 24025HNT, 30030BMT, 30030HNT.
【Dimensions & Package】- Dimensions: 19 9/16" x 7 1/16". Please do DOUBLE check the size and shape of your original parts before ordering. Package:....
【Premium Material】- Boloda Grill Heat Plate are made of premium stainless steel. These steels resist corrosion and maintain its strength at high....
【Grill Plate Tent Function】- Our grill replacement parts protect the burner from food residue, blocking the orifice. Catch drippings that smoke....
【Easy Install & Clean】- Simple Step to install to your grill. The surface of grill heat tent is smooth and easy to care, just wash with soapy....

Check Stock

Replacement for LG Kenmore Dryer LP Gas Conversion Kit 383EEL3002D AP5204371 PS3522300

Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane.
The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer.
Dryer LP conversion kit 383EEL3002D is an part that fits some gas dryers in these series: Kenmore 796.
LG 383EEL3002D Dryer LP Gas Converter. for use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. LG 383EEL3002D Dryer LP Gas Converter. For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RN1317TS. Refer to your manual to ensure ordering the correct, compatible part.
Dryer LP conversion kit 383EEL3002D is an equipment manufacturer part that fits some gas dryers in these series: Kenmore 796.
and LG DLG and DLGX. Dryer LP conversion kit 383EEL3002D converts a natural gas dryer to operate on liquid propane. The LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer. A qualified technician should install this LP conversion kit because of the risk of explosion or fire if the kit is installed in.

Check Stock

Tool Daily Pressure Washer Sandblasting Kit Wet Sandblaster Attachment 5000 PSI 1/4 Inch Quick Disconnect Orifice 3.0

Orifice 3.0. Minimum Flow Rate: 2.5 GPM. Minimum Pressure: 2700 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5,....
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input)....
Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack".....
Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

Check Stock

RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle, Universal Thread Tips for Snow Foam Lance, 2-Pack

Universal orifice nozzle to generate thick foam inside foam cannon, 2-pack.
Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI..
If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover..
Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon..
If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

Check Stock

Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch

Tool Daily 1/4" quick disconnection Foam Cannon with white container bottle and additional orifice nozzle 1.1 mm for foam sprayer. Container bottle has bigger mouth to easily fill in and extra-wide neck to prevent crack issue..
EASY to install: fill some soap into the bottle with warm water to get thick foam.
Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3600 PSI. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam..
Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI..
Application: ideal for Motorcycle, Car Washing.
floors, Windows washing, it is best product for Detailing Trucks or SUVs.
Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines f....

Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

Check Stock

TIG Welding Torch WP-17V 13ft 150Amp Air Cooled Lift TIG Torch for YESWELDER MIG-205DS MIG-250PRO MIG Welder ARC-205DS Stick WELDER

[UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
[APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..

Check Stock

Hole Saw M42, Corn Hole Drilling Cutters, Heavy Duty Metal Hole Cutter for Wood Cornhole Boards Aluminum Plastic with Open Saw (Red, 150 mm/ 6 Inch)

... operate, after drilling, the spring on the drill will automatically push the disk out of the saw.
With high hardness and toughness, built tough for repeat use.
Wide range of usage: wood hole cutter is designed for wood, plastic, iron plate, ceiling lamp, cinder wall, corn orifice plate cutting, handy and portable, save time and effort.
Fit for: 6 inch hole saws feature with M42 Hss teeth and carbon steel belt, the mandrel and bit can be rotated clockwise, suitable for most 1/2 inch bits, the drilling depth is up to 3 - 25 mm.
Ready to use: pointed teeth with small vibration, sturdy and hard drill allows you to operate more stable and high-efficiency, clean edge design makes the hole saw cut smooth and fast.
Warm note: please check the size before purchase.

Check Stock

Welding Nozzles 169-724 169724 1/2

4PK Miller style MIG gas nozzle 169-724(169724).
1/2" orifice, 1/8 in / 3.2 mm recessed tip, fits 169-724 nozzles for Miller M-25/M-40 MIG guns..
The gas nozzles don't fit Miller 180 or 190DescriptionPremium quality Miller style MIG gas nozzle 169724.
1/2" orifice,1/8 in / 3.2 mm recessed tip, fits 169-724 nozzle adapter in Miller M-25/M-40 MIG guns.
The gas nozzles don't fit Miller 180 or 190.

Check Stock

Hole Saw M42, Corn Hole Drilling Cutters, Heavy Duty Metal Hole Cutter for Wood Cornhole Boards Aluminum Plastic with Open Saw (Red,160 mm/ 6.3 Inch)

Sturdy and reliable material: corn hole saw is made of durable and reliable material, with high wear resistance, fast and clean cutting for the hard materials, which can be applied to perforated cast iron panels, aluminum panels, plastics, wood.
Easy to operate: saw hole cutter has wonderful cutting performance, featuring with non-binding clean edge design, easy to operate, after drilling, the spring on the drill will automatically push the disk out of the saw.
With high hardness and toughness, built tough for repeat use.
Wide range of usage: wood hole cutter is designed for wood, plastic, iron plate, ceiling lamp, cinder wall, corn orifice plate cutting, handy and portable, save time and effort.
Fit for: 6.3 inch hole saws feature with M42 Hss teeth and carbon steel belt, the mandrel and bit can be rotated clockwise, suitable for most 1/2 inch bits, the drilling depth is up to 3 - 25 mm.
Ready to use: pointed teeth with small vibration, sturdy and hard drill allows you to operate more stable and high-efficiency, clean edge design makes the hole saw cut smooth and fast.
Warm note: please check the size before purchase.

Check Stock