ReviewsOrion Cobalt 12

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

• JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
• MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
• CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
• APPLICATION: best used for drilling in hard metal, including stainless steel.
• INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

• JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
• MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
• CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
• APPLICATION: best used for drilling in hard metal, including stainless steel.
• INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.

Telrad Finder Sight Red / Green Switchable with Mounting Base

• Allows you to attach an Orion finder scope bracket, reflex sight bracket, or green laser pointer bracket to Schmidt-Cassegrain telescopes (SCT) up to 11 inch aperture.
• Designed to accept any Orion finder scope bracket, EZ Finder II and EZ Finder Deluxe reflex sight brackets, and Orion's SkyLine Deluxe Green Laser Pointer bracket.
• Also lets you attach a second or third aiming device to your Schmidt-Cassegrain for multiple aiming options.
• Fits factory drilled holes on Celestron, Meade, and Orion Schmidt-Cassegrain telescopes.
• Attaches directly to Schmidt-Cassegrain Telescope (SCT) optical tube with included mounting hardware.

Cowboystudio Timer Remote Control Shutter for Canon EOS

• The Orion Dew Zapper Pro is an advanced 12-volt DC dew prevention and elimination system which can power up to four heating bands to prevent dew accumulation on all your optics (heating bands sold separately).
• Microprocessor-controlled circuitry delivers pulse-width modulation for precise temperature control of up to four heating bands.
• Each heater output has its own temperature control knob with adjustment from 0% to 100% so you can set each one to your preference.
• Heating bands are power-efficient, drawing only 0.25 amps to 2.8 amps at maximum output (heating bands sold separately).
• Don't let dew dampen your spirits, or your telescope optics, get the made in the U.S.A. Orion Dew Zapper Pro today.

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

• TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
• 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
• Double spiral flutes for more efficient swarf clearance.
• 1/4 Inch hex Shank with quick release slot to eliminate slipping.
• Self-starting for clean holes in thin materials.
• M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
• The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..

Stringjoy DRP13 Signature Nickel Electric Guitar Strings, (Drop Tune Extra Heavy Gauge - 13-68)

• Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
• Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
• Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
• Not Even Slinky’s 12-56 gauge is optimal for detuning.
• Made in California, USA with the finest and freshest materials.

Orion SkyScanner 100mm Tabletop Reflector Telescope Kit

• Terrific entry-level reflector tabletop telescope with 100mm parabolic primary mirror optics - no plastic lenses as found in some other telescopes made for beginners.
• See hundreds of craters on the Moon, detail on Jupiter and other planets, even when viewing from relatively bright city locations.
• Perfect reflector telescope for wide-angle, low-power viewing of the Milky Way and other deep sky objects when viewing from relatively dark skies.
• Includes two 1.25" telescope eyepieces: 20mm (for 20 power magnification) and 10mm (for 40 power magnification), EZ Finder II aiming device and Starry Night astronomy software.
• Special Kit includes: Orion MoonMap 260, Orion moon filter, Orion's Star Target Planisphere and Orion's Exploring the Cosmos : An Introduction to the Night Sky.

OXMUL M35 Step Drill Bit for Metal 3/16 to 7/8 Cobalt Bits Extra-Heavy Duty for Stainless Steel Hard Steel Mild Metal Aluminum Wood Industrial Grade 12-Steps Co35A2-A

• [Extra-Heavy Duty+ for Stainless Steel] The M35 Cobalt Drill Bits is Industrial Grade and can drill 8X longer life and 3X faster. This Cobalt Drill bits can help you cut more holes, extra-heavy duty+ for Stainless Steel, Hard steel, Mild Metal, Galvanized Steel, Aluminum,Iron, Wood Plate,PVC and Copper. If you're expanding a lot of holes in metal sheet then please choose this step drill bit.
• [M35 Cobalt Steel] This M35 Cobalt Drill bit can successfully drill more than 35 holes easily into 1/5" thick Stainless Steel plate like knife through butter!.
• [12 Steps ︱2-Spiral-Flute] 12 Steps: from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral-Flute:Clears Chips faster.
• [Cutting Fluid] Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent rust!.
• [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.

Orion 7383 8-Inch Dovetail Mounting Plate

• Compatible with Orion VersaGo, Versago II, SkyView AZ, and TeleTrack altazimuth mounts.
• Rigid dovetail plate provides a platform for coupling telescope optical tubes to Orion AstroView, SkyView Pro, Sirius, and Atlas equatorial mount.
• 8" long dovetail plate made of extruded, anodized aluminum.
• Attach one to all your telescopes for easy, no-tools swapping of instruments on your Orion mount and tripod.

Orion Cobalt CB250A 250 Amp 12V Circuit Breaker

Century Drill & Tool 04433 Cobalt Bi-Metal Hacksaw Blade Set, 3 Piece, 12-Inch

• Set includes 18T by 12-Inch, 24T by 12-Inch and 32T by 12-Inch cobalt bi-metal hacksaw blades.
• Cobalt bi-hard hacksaw blades offer a unique design that stays cooler and remains sharper while cutting harder materials like steel or hard metals.
• One piece construction cannot edge strip and avoids any of the weld line problems associated with bi-metal blades.
• Century’s staged heat treated process creates the strongest teeth while the backbone is heat treated to a lower degree enabling its flexibility.