ReviewsOsoyoo Ramps 4

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

BISupply Vehicle Service Ramp Set – 6.6in Car Lift, 5 Ton Heavy Duty Truck Ramps for Vehicle Maintenance, 2 Pack

  • AUTO RAMP SET FOR VEHICLE MAINTENANCE: Use the BISupply 2 Pack Vehicle Ramps Oil Change Service Ramps to work on the underside of your vehicle easily and comfortably.
  • Generous 10,000-pound (4,536 kg) weight capacity per tire ramp allows you to safely change your oil, transmission fluid, drive belt, or other vehicle parts on your cars, pickups, SUVs, and vans.
  • Coming in at 19.5 pounds each (8.8 kg), these car jack ramps are designed for easy transportation.
  • SAFE STABILITY WHILE WORKING: Because of their larger surface area, ease of use, and ability to keep your vehicle level, car service ramps are often considered to be safer and more efficient than car stands and jacks for vehicle maintenance.
  • The traction dot design helps you to easily guide your vehicle up the RV ramps and to keep the tires in place.
  • It is suggested to use wheel chocks for extra security.
  • OPTIMAL CLEARANCE: Gradual incline lifts your truck or car up 6.6-inch (16.8 cm) from the ground.
  • This impressive lift height ensures reliable lift while providing convenient access to the underside of your vehicle for routine maintenance.
  • 11.3-inch (28.7 cm) wide automobile ramps fit extra wide tires.
  • EASY TO USE: Evenly distribute the weight of your vehicle with these auto ramps for changing oil an....
Check Stock

OSOYOO Robot Car Starter Kit for Arduino UNO | STEM Remote Controlled App Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Kids Teens Adults

  • ...e Engineers and Programmers ourselves, so we know how important it is to CREATE Your Dreams! Not All Robot Kits Are Created Equal: Pay For True Quality & You Will Not Be Disappointed. Thanks for your support – you’ll hear from us as soon as you order..
  • SIMPLE, INTELLIGENT, FUN PROJECT: Control your OSOYOO Robot Car V2.0 System by Android and iOS App, allowing many additional functions such as imitation driving, WiFi controlled auto driving and battle bots (must purchase at least two kits). This intelligent, new technology supports various projects such as line tracking, object motion following, obstacle avoidance and gravity sensing control. Our newest bot has the best benefits available, that cheap knockoffs simply can’t compete with.
  • PROGRAMMABLE LEARNER KIT FOR BEGINNERS AND PROFESSIONALS: The OSOYOO Robot Car Kit V2.0 is compatible with the Arduino UNO R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators, learn about the Internet of Things (IoT) and get hands-on programming, coding, electronics and robotics experience..
  • THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes E....
Check Stock

EZ-Access Transitions Aluminum Threshold Ramp with Adjustable Height up to 4-3/8\

  • Entry Ramp: Portable, stand alone 24" Angled Entry Ramp features independently adjustable legs with swivel feet, allowing for vertical adjustment from 1-11/16" to 4-3/8" in height.
  • Dimensions: 23-7/8” x 36-1/4” Height: 1-11/16" Weight: 11 lbs Capacity: 700 lbs.
  • Safe and Secure: This self supporting ramp is ideal for doorways that swing in and out, uneven surfaces and single step rises.
  • It's made of lightweight, durable aluminum with a slip resistant tread surface.
  • Access Ramps For You: Make your living space easier and safer with threshold ramps, semi permanent ramps, and portable ramps for temporary needs, uneven surfaces, or single step rises.
  • Increase Mobility and Security: Mobility solutions help you or a loved one regain confidence, freedom, and the ability to safely and independently access home or vehicle with less stress and more security.
  • Access Anywhere: Our products offer an array of temporary, portable and permanent mobility solutions from toilet lifts to ramps to homecare products to walker, scooter, wheelchair and crutch accessories.
Check Stock

BISupply Vehicle Service Ramp Set – 6.3in Car Lift 2 Ton Heavy Duty Truck Ramps for Vehicle Maintenance, 2 Pack

  • AUTO RAMP SET FOR VEHICLE MAINTENANCE: Use the BISupply 2 Pack Vehicle Ramps Oil Change Service Ramps to work on the underside of your vehicle easily and comfortably.
  • Generous 4,000-pound (1,814.4 kg) weight capacity per tire ramp allows you to safely change your oil, transmission fluid, drive belt, or other vehicle parts on your cars, pickups, SUVs, and vans.
  • Coming in at 8.7 pounds (3.9 kg) each, these car jack ramps are lightweight for easy transportation.
  • SAFE STABILITY WHILE WORKING: Because of their larger surface area, ease of use, and ability to keep your vehicle level, car service ramps are often considered to be safer and more efficient than car stands and jacks for car and truck maintenance.
  • The raised sides and traction design helps you to easily guide your vehicle up the RV ramps and to keep the tires in place.
  • It is suggested to use wheel chocks for extra security.
  • OPTIMAL CLEARANCE: Gradual incline lifts your truck or car up 6.3-inch (16 cm) from the ground.
  • This impressive lift height ensures reliable lift while providing convenient access to the underside of your vehicle for routine maintenance.
  • 11.5-inch (29.5 cm) wide automobile ramps fit extra wide tires.
  • EASY TO USE: Evenly distribute the weight of your vehicle with these auto ramps....
Check Stock

Burning Bridges (Re-Recorded In Stereo)

  • OVERCOME ANY CURB: The BISupply | 4-Inch Heavy Duty Ramps 2-Pack measures 23.6" x 11.1” x 3.75" inch (59.9cm x 28.2cm x 9.5cm) per shed ramp to provide access between a sidewalk and street curb.
  • VARIOUS APPLICATIONS: Use with your vehicle, mower, wagon, dolly cart, hand trolley, golf cart, motorcycle, boat or anything else with wheels to access a playground area, hospital, public and private parking lot, warehouse, and high traffic areas where curb access is required on a regular basis.
  • Designed for straight curbs, not intended for use on curved curbs.
  • Not recommended for wheelchairs due to steeper incline.
  • EASY TO USE: Pre-drilled mounting holes on either side of the shed ramps allow you to bolt the units together to make a double-wide step ramp (hardware included).
  • Use door ramp singularly or connected to create a 47.2-inch (119.9cm) extended driveway ramp.
  • Predrilled 5/16-inch anchor inset holes on front side (skinny edge) of automotive ramps allow for optional permanent mounting.
  • If mounting permanently on a public road, check for any required local city permits.
  • BUILT TO LAST: 4,000-pound (1,814kg) weight capacity per curb bridge ramp.
  • Made from heavy-duty plastic that does not emit a strong odor like rubber ramps.
Check Stock

Loading Ramps- Steel Ramp Set for ATVs, Motorcycles, Mowers, Carts & More- Use with Pickup Trucks & Trailers- 1200lb Combined Capacity by Stalwart

  • SET OF 2- The set of ramps is the perfect solution for getting your ATV, motorcycle, golf cart, or mower safely into a trailer or in the bed of a truck. Bolt the ramps together (bolts not included) for 31” of angled track for use with carts or dollies..
  • 1200LB CAPACITY- With a 600-pound weight capacity each, these heavy-duty steel ramps can be used separately for moving scooters and dirt bikes in and out of vans, or used together for 4-wheeled vehicles up to 1200 pounds..
  • SUPREME TRACTION- The skid resistant tread and angled foot plates create smooth transitions on and off the ramp for hassle-free loading. Weighing 9lbs each and equipped with integrated handles, these lightweight and durable ramps are extremely portable..
  • MULTIPURPOSE- These ramps are designed for ATV’s and dirt bikes but can also create easy transitions when driving the lawn mower into the shed, making deliveries in the city or loading your motorcycle on a trailer..
  • PRODUCT DETAILS- Material: Steel. Individual Dimensions: (L) 35.5” x (W) 8.5” x (H) 2”. Foot Plate is 4” Long. Includes 2 Ramps, 2 Foot Plates & Hardware. Max. Weight Capacity: 600lbs each or 1200lbs combined. Color: Silver..
Check Stock

12V 24V 3D Printer Motherboard Accessories kit MKS Base V1.6+MKS TFT 2 Layer 32 Bit Color Screen Mega2560 Ramps1.4 Compatible for Marlin/Smoothieware/Repetier firmware

  • Combining all the functions on one board solves the cumbersome and troublesome problem of the Ramps1.4 combo interface..
  • The board uses a high quality 2 layer board and is specifically optimized for heat dissipation. The ramps are 2 layer boards..
  • It adopts dedicated power chip and supports 12V-24V power input to solve the heating problem of Ramps voltage conversion chip..
  • The firmware can use the open source firmware Marlin, the configuration is exactly the same as ramps1 4, which can directly replace Ramps1.40..
  • Using the 4982 as a motor drive, it has the same performance as the 4988, but with a SOP package, the heat dissipation is better..
Check Stock

KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V

  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive..
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

ZENY Pair 7.5' Aluminum Truck Ramps/ATV UTV Ramps/Motorcycle Ramps/Loading Ramps for Lawn Mower/Pickup Trucks/Snow Blower 1500lb Capacity

  • 【1500 lbs Capacity】ZENY lightweight ramps are carefully designed using corrosion-resistant aluminum so that you can have years of maintenance-free use. Use a single ramp to transport a dirt bike or motorcycle and use both to load an ATV, 4-wheeler, or lawn mower onto a truck bed. 7.5ft aluminum ramps are both sturdy and versatile with their 1,500 lb capacity (Each piece 750lbs), they are ideal for transferring any four-wheeled vehicle to a truck trailer..
  • 【Arched Design】The arched ramp design allows for optimal clearance, ensuring a smooth lift every time. This folding ramp also features serrated crossbars to allow for great traction. They are ideal for any mid-size tires including ATV tires and 4-Wheeler tires. They also make great lawn mower, motorcycle, snow blower, dirt bike, and garden tractor loading ramps..
  • 【Safety Straps Included】These truck tailgate ramps also include heavy duty load straps to keep the ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when you load..
  • 【Foldable & Lightweight Truck Ramps】 Each component of these trailer ramps is design....
Check Stock

TRIGORILLA ANYCUBIC RAMPS 1.4 Control Board Panel Motherboard Shield for Arduino Reprap Prusa Mendel

  • ❀ Fully assembled & tested, no soldering required.
  • ❀ Designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • ❀ Using a dedicated power supply chip, support 12V-24V power input, the voltage converter chip Ramps solve the heating problem.
  • ❀ Accept 24V input, the same system power can heat the bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
  • ❀ The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
Check Stock