ReviewsOtc Heavy Duty Truck Scanner

FCAR Heavy Duty Truck Scanner F802 OBD Diesel Diagnostic Scan Tool Full System Engine Code Reader with DPF Regen fit for Cummins, Caterpillar, Detroit, Paccar, International, Volvo, Isuzu, Fuso

...related information reset, DPR state reset, forced DPR regeneration, differential pressure check, etc, which saves hundreds or even thousands of dollars in repair costs for you..
【WIDE TRUCK COMPATIBILITY】F802 heavy duty commercial truck scan tool is a 24V diesel truck scanner, it fits for all major truck models which compatible with standard OBD protocols (SAE J1939/ SAE J1708/ SAE J1850/ SAE J1587/SAE J27145), such as Volvo, Mack, International, Freightliner, Peterbilt, Kenworth, Western Star, Cummins, Caterpillar, Detroit, Paccar, Isuzu, Fuso, etc, F802 provides OEM-LEVEL diagnostic for those diesel OBD trucks..
【OE-LEVEL FULL SYSTEM DIAGNOSTIC】F802 commercial truck scanner supports all system diagnostics for all diesel Trucks/Pickups/Buses/vans that are in compliance with standard HD OBD protocols. Including Engine, ABS, Transmission, DPF, Tire Pressure, Body Controller, Instrument Cluster, Brakes, Communication Unit, Aftertreatment, SART Module, etc. It can read and clear error codes after repairing the truck fault, show graphical live data and read Freeze Frame..
【ENHANCED SERVICE RESET＆OIL RESET】After w....

Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Check Stock

AUTOPHIX F802 Heavy Duty Truck Scanner DPF Regen Tool Fit for Cummins Caterpillar Detroit Paccar International Volvo Ford All System Diesel Scan Tool Diagnostic Scanner with Oil Reset OBD2 Code Reader

...ted information reset, D-P-R state reset, forced D-P-R regeneration, differential pressure check, etc, which saves hundreds or even thousands of dollars in repair costs for you..
【WIDE TRUCK COMPATIBILITY】F802 heavy duty commercial truck scan tool is a 24V diesel truck scanner, it supports all major truck models which comply with standard OBD protocols (SAE J1939/ SAE J1708/ SAE J1850/ SAE J1587/SAE J27145). F802 is compatible with Volvo, Mack, International, Freightliner, Peterbilt, Kenworth, Western Star, Cummins, Caterpillar, Detroit, Paccar, Isuzu, Fuso, etc, F802 provides OEM-LEVEL diagnostic for those diesel OBD trucks..
【OE-LEVEL FULL SYSTEM DIAGNOSTIC】F802 commercial truck scanner supports all system diagnostics for all diesel Trucks/Pickups/Buses/vans that are in compliance with standard HD OBD protocols. Including Engine, ABS, Transmission, D-P-F, Tire Pressure, Body Controller, Instrument Cluster, Brakes, Communication Unit, Aftertreatment, SART Module, etc. It can read and clear error codes after repairing the truck fault, show graphical live data and read Freeze Frame..

Check Stock

LAUNCH X431 PRO3S+HDIII Gasoline & Heavy Duty Truck 50+ Reset Service Bidirectional Diagnostic Scan Tool,Cars&Heavy Duty Trucks All Systems Scanner,Key Program,ECU Coding,Cars&Trucks Connector Kits

5Yrs Warranty【2023 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner from LAUNCH ,work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/ /pick-up/etc.【AutoAuth for FCA SGW】Support Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017【2023 OE-Level features】Guiding Functions,Variant Coding with Benz,Modification for BMW,Offline Coding,Customization,Personalization,Calibration..
【Over 50 Service Reset Functions + Bi-Directional + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 PRO3S+ HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 50+ reset service functions like SAS/EPB/TPMS/DPF/IMMO/Oil/Brake/GEARBOX Reset, ABS Bleed, Injector coding, etc... Powerful dealership level Functions can fully meet your needs..
【2023 BEST Advanced Hardware & All Systems Diagnosis】LAUNCH X431 PRO3S+ HDIII automotive scanner equipped with Android 9.0 operating system, 10.1-inch HD IPS(1920*1200) touchscreen, 7000mAh rechargeable battery (up to 12+ hours battery life), 3+32G memory(support 128....

Check Stock

OTC 1750A 6000 lb. 'Revolver' Diesel Engine Stand with Universal Engine Adapter Assembly

OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures.
96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine.
Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance.
2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded.
Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications.

Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.

Check Stock

OTC 5017A Heavy Duty Brake Drum Dolly for Class 7 and 8 Trucks and Trailers

OTC's brake drum dolly is the back saving piece of equipment that every shop needs to prevent employee injury when doing brake work on heavy trucks and trailers.
Remove, install, and transport truck brake drums - safely and easily - without having to physically lift them.
Works on the 15 inch and 16-1/2 inch brake drums found on most Class 7 and 8 tractor and trailer brake systems.
Dolly features heavy-gauge steel construction, ten-inch pneumatic tires, and an adjustable handle.
Backed by OTC's Lifetime Marathon Warranty.

Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
Product 2: High-grade materials ensure quality performance over the lifetime of the tool.

Check Stock

Autel MaxiSys Elite II Scanner, 2023 New Version of MS909/ MS919/ Ultra, Top Intelligent Diagnostic, 2 Years Free Update ($2590 Value), J2534 ECU Programming & Coding, 38+ Services, FCA Access

【2023 NEWEST LAUNCH FIRST Advanced Scan Tool Compatible With 12V And 24V Vehicles】Design for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner from LAUNCH ,work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/ /pick-up/etc.【AutoAuth for FCA SGW】Support Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017【2023 OE-Level features】Guiding Functions,Variant Coding with Benz,Modification for BMW,Offline Coding,Customization,Personalization,Online Calibration..
【Over 50 Service Reset Functions + Bi-Directional + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 PRO3S+ HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 50+ reset service functions like SAS/EPB/TPMS/D.PF/IMMO/Oil/Brake/GEARBOX Reset, ABS Bleed, Injector coding, etc... Powerful dealership level Functions can fully meet your needs..
【2023 BEST Advanced Hardware & All Systems Diagnosis】LAUNCH X431 PRO3S+ HDIII automotive scanner equipped with Android 9.0 operating system, 10.1-inch HD IPS(1920*1200) t....

Check Stock

LAUNCH X431 V+ PRO 4.0 HDIII Heavy Duty Truck Scanner,Diesel&Gasoline Bidirectional Scan Tool,OEM All System Scanner for 170+ Car Brand,Key Program,ECU Coding,60+ Reset,Cars&Trucks Full Connector Kits

【2023 NEWEST Bi-Directional Scan Tool -Compatible With 12V And 24V Vehicles】LAUNCH X431 V+PRO 4.0&HDIII scan tool are designed for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner for 12V cars and 24V Heavy-duty trucks which provide the most extensive multi-brand coverage and comprehensive diagnostics for you. Passenger vehicles:Cars, SUV, MPV, Pickup truck.
Commercial vehicles:Heavy Duty Truck, Passenger Bus, Excavator, Tractor, Recreational Vehicle..
【2023 Newest Directional Scanner —Faster, More Popular ,Wider Regional vehicle coverage 】LAUNCH X431V+ PRO 4.0 scan tool adds loads of OE-Level features as ➤Refresh Hidden Functions ➤ADAS Calibration➤Guided Functions➤AutoAuth for FCA SGW ➤Online Coding ➤Variant Coding ➤Setting & Changeover for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, for worldwide vehicles, and keep growing..
【Bi-Directional + Over 60 Service Reset Functions + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 V+ PRO + HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 31+ reset service functions like SAS/EPB/TPM....

Check Stock

NEWZQ Tilt Trim Motor with Reservoir 809885A1 809885A2 for Mer-cury Mar-iner Fo-rce, Mer-cury/Mariner Outboards(Single Ram) Late Model 50-150HP, Fo-rce Outboards(Double Ram) 50-125HP

OTC Cylinder Sleeve Removal Plates are designed to work in conjunction with OTC manual (no. 1200) and hydraulic (1202 and 1203) cylinder sleeve puller sets.
For use when pulling sleeves on truck, bus, and tractor engines, as well as those in other vehicles.
Cast and machined heavy duty steel for durability under repeated use.
Plate measures 4.980 O.D, 4.860 I.D. (+.010 -.000).
For 4-7/8 inch bore Cummins N and NH series engines, and Mack ENDT - 672 engine.

Check Stock