ReviewsOther Brass Valves

2 Pcs Brass Self Piercing Saddle Valve Copper Self Tapping Valve with 1/4 Inch Compression Outlet for 3/8 to 1-5/16 Inch Water Pipe Supply

Quality Material Selection: our water pipe valve is made of brass, heavy duty and tough, reliable and long lasting, strong against impact and....
Notable Size Details: the tapping valve supports the outer diameter of about 3/8 to 1-5/16 inches pipes, and it has a 1/4 inch compression outlet on....
No Bad Effects on Water: this water line saddle valve comes with fine workmanship and is crafted with quality material, not comprising some poisonous....
Saddle Valve Replacement: you will receive 2 pieces of self tapping valves, which include needle valves, saddles and clamps.
No Other Complex Steps: this sort of pierce valve is designed with a tear down sleeve to exert pressure to the water line and make a tight seal, can....

Check Stock

Rheem RTG20220AB Webstone Tankless Water Heater Service Valve Kit, Clean Brass

These hot and cold water service valves simplify installation and service by combining multiple valves and connections in a single part.
Clean brass for California low lead codes.
Fits all models of Rheem gas tankless water heaters.

Check Stock

Carbon Steel Mini Needle Valve - with Round Knob 1/4\ NPT 6000 PSI DAIRAZAN

...so that it is anti-rust and corrosion resistant..
【High Quality】High pressure brass needle valve, stable smooth delicate tightness practical. The brass needle valve is clean and bright inside, and the ruler can be controlled accurately. Its exquisite processing, can withstand greater pressure than other types of valves, strong connection, high pressure resistance, good sealing performance and repeatable installation..
【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electric power, medicine, and food..

Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
can be installed horizontally or vertically.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.

Check Stock

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
Constructed with high strength alloy, heavy duty stainless steel and durable brass.
Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.

Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Orange

Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
Plastic “brass” instruments have been in the marketplace for a few years now.
First came the trombones, then the trumpets.
Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
Cool Winds is at the forefront of this design and manufacturing revolution.

Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Blue

Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
Plastic “brass” instruments have been in the marketplace for a few years now.
First came the trombones, then the trumpets.
Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
Cool Winds is at the forefront of this design and manufacturing revolution.

Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Black

Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
Plastic “brass” instruments have been in the marketplace for a few years now.
First came the trombones, then the trumpets.
Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
Cool Winds is at the forefront of this design and manufacturing revolution.

Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Red

Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
Plastic “brass” instruments have been in the marketplace for a few years now.
First came the trombones, then the trumpets.
Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
Cool Winds is at the forefront of this design and manufacturing revolution.

Check Stock

UEHICT Garden Hose Splitter 2 Way Heavy Duty - Water Hose Splitter Solid Brass Garden Hose Y Splitter, Hose Bib Splitter Outdoor Faucet Splitter Y Connector for Garden Hose with Two Shut-Off Valves

...ile the other for washing your car. This spigot splitter could also act as a spigot extender If your faucet is too recessed into the wall..
【Build To Last】UEHICT water spigot splitter is crafted from heavy duty brass to not only ensure long-term reliability, but also so that it won't rust. With its interior ball valves also made of premium metal, you won't have to worry about it becoming brittle or cracking in all kinds of weather..
【Dual Valve Closure】This brass hose splitter has 2 shut-off valves. It allows you to control the flow separately and easily. The handles of this garden hose y splitter, covered with TPR for easy grip and operation, are friendly to manipulate for stiff hands or hands with arthritis..
【Leak-Resistant Construction】UEHICT y hose connector is fitted with high quality metal ball valves for a tight seal. Featuring deep threads for a solid connection, this garden hose splitter 2 way effectively maintains water pressure and prevents any leaks or drips..
【Seamless Installation】UEHICT y connector for garden hose fits all standard 3/4" spigots and hoses. No tools are required, you can have an easy and flawless installation. Each unit comes with a teflon tape and three extra rubber sealing washers for replacement..

Check Stock

Garden Hose Splitter 2 Way - Heavy Duty Solid Brass Hose Y Splitter，Hose Faucet Splitter,3/4\ Brass Hose Adapter Connectors Shut Off Valve, Hose Spigot Adapter 2 Valves, Plus 4 Extra Rubber Washers.

... make the Y splitter durable, heavy duty brass hose connector support up to 0.8 MPa water pressure， and can work normally under various harsh environments and weather conditions such as high temperature, high humidity, and high pressure. Solid and durable, corrosion proof and has a long service time..
Y Splitter 2 Valves ： Instantly create two tap outlets with this ultra-durable hose splitter 2 way connector and eliminate the stress of constantly switching out hoses. 2 Way Brass Hose Splitter with 2 shut off valves to control water flow separately and easily. Extra 4 rubber washers included to prevent the hose connector from leaking..
Easy to connect Garden Hose Splitter ：This water hose splitter allows two 3/4’’ hose tap connectors to be connected without the need of tools, easily accommodate all standard hoses.The 360°rotatable top connector adds convenience for both installation and adjusting hoses to a desired direction,with standard 3/4 inch male threaded swivel connection, working perfectly with any 3/4" garden hose thread spigot or hose connection..
Adjustable Water Flow Control : 2-way garden hose connectors are equipped with high-quality ball valves.Just adjust the brass handle to use it as a garden hose pressure regulator, easily ta....

Check Stock