ReviewsOutdoor Current Transformer

DEWENWILS 300W Outdoor Low Voltage Transformer with Timer and Photocell Sensor, 120V AC to 12V/14V AC, Weatherproof, for Halogen & LED Landscape Lighting, Spotlight, Pathway Light, ETL Listed

【Built-in Dusk to Dawn Sensor】Attached with this transformer, the landscape lighting will turn on automatically at dusk and off at dawn. 300W, convert 120V AC household voltage to 12V/14V AC safety voltage, providing a safer and more practical electrical current level..
【Countdown Timer】Light control timing, 1-9 hour countdown, with this mode, the transformer will turn on at dusk and automatically turn off 1/2/3/4/5/6/7/8/9 hours later..
【Easy to Operate & Install】Press ▲▼ to set Always On/Auto/Countdown Timing mode in turn. Built-in hanging holes, 3.3ft STJW 18AWG power cord, mount it on outdoor walls directly..
【Memory Function】The low voltage transformer will remain the mode you selected before, even when power outage, so you don’t need adjust it frequently (The transformer needs run in this mode for at least 24 hours, then the memory function works)..
【Durable & Waterproof】 High performance metal material, protects the transformer against all severe weather conditions, corrosion resistant, withstands years of use. The total power of the landscape lighting should not exceed 80% of the power pack’s capacity..

Check Stock

DEWENWILS 120W Outdoor Low Voltage Transformer with Timer and Photocell Sensor, 120V AC to 12V AC, Weatherproof, for Halogen & LED Landscape Lighting, Spotlight, Pathway Light, ETL Listed

【Built-in Dusk to Dawn Sensor】Attached with this transformer, the landscape lighting will turn on automatically at dusk and off at dawn. 120W, convert 120V AC household voltage to 12V AC safety voltage, providing a safer and more practical electrical current level..
【Countdown Timer】Light control timing, 1-9 hour countdown, with this mode, the transformer will turn on at dusk and automatically turn off 1/2/3/4/5/6/7/8/9 hours later..
【Easy to Operate & Install】Just press ▲▼ to set Always On/Auto/Countdown Timing mode in turn. Built-in hanging holes, 3.3ft STJW 18AWG power cord, mount it on outdoor walls directly..
【Memory Function】The low voltage transformer will remain the mode you selected before, even when power outage, so you don’t need adjust it frequently. (The tranformer needs to run in this mode for at least 24 hours, then the memory function will work)).
【Durable & Waterproof】 High performance metal material, protects the transformer against all severe weather conditions, corrosion resistant, withstands years of use. The total power of the landscape lighting should not exceed 80% of the power pack’s capacity..

Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
❤Reliability❤Fully compatible with most similar products.
the number of opening and closing times is not less than 1000 (tested at 20℃).
this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
❤Specification❤Opening size: 13mm × 13mm.
lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.

Check Stock

Mini Mounted Point Set, 50 pcs.

The transformer has over current, over voltage, over heat protection.
With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
Wide application range and flexible to operate.
The handheld machine has seven standard grinding tools which is varied.
Suitable for processing wood, engineering plastics and soft metals.

Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

Analog Current Meter Module. Transformer can only sense AC.
This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.

Check Stock

DEWENWILS 300W Low Voltage Pool Light Transformer, 120V AC to 12V/13V/14V AC, Multi-tap Safety Transformer for Pool Lighting, Spa, Underwater Fountain Lights, Outdoor Landscape Lights

... circuits for connecting with your pool lights and low voltage landscape lights around..
【Easy to Install】 10 knockouts(φ1.06’’) are available for you to thread your wire in. High voltage compartment and low voltage compartment are convenient for storing the corrected wires. 2 mounting brackets separate the transformer from the wall, achieve heat dissipation effect..
【Durable & Safe】Solid metal construction, sealed shield design, protects the transformer against all severe weather conditions. UL Listed, this safety transformer is specially designed to operate low voltage lighting, suitable for direct connection to underwater pool/spa lights..
【Widely Used】 Approved for both indoor and outdoor installations. You can install it your garage for operating the lights, or use it for connecting pool lights, fountain lights, spar, submersible fixtures, outdoor landscape and decorative lighting etc..
【Automatic Circuit Breaker】 Built-in automatic circuit breaker, it will provide overload and short circuit protection effectively. The total power of the landscape lighting should not exceed 80% of the power pack’s capacity..

Check Stock

DEWENWILS 100W Pool Light Transformer, 120V AC to 12V/13V/14V AC, Multi-tap Low Voltage Transformer for Swimming Pool Lighting, Spa, Landscape & Fountain Lights, Outdoor Lighting Products, UL Listed

... circuits for connecting with your pool lights and low voltage landscape lights around..
【Easy to Install】 10 knockouts(φ1.06’’) are available for you to thread your wire in. High voltage compartment and low voltage compartment are convenient for storing the corrected wires. 2 mounting brackets separate the transformer from the wall, achieve heat dissipation effect..
【Durable & Safe】Solid metal construction, sealed shield design, protects the transformer against all severe weather conditions. UL Listed, this safety transformer is specially designed to operate low voltage lighting, suitable for direct connection to underwater pool/spa lights..
【Widely Used】 Approved for both indoor and outdoor installations. You can install it your garage for operating the lights, or use it for connecting pool lights, fountain lights, spar, submersible fixtures, outdoor landscape and decorative lighting etc..
【2-year Warranty】DEWENWILS professional customer service team offers 24/7 troubleshooting for these wall lights and hassle-free return policies through Amazon.

Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

❤Specification❤Opening size: 13mm × 13mm.
lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
❤Reliability❤Fully compatible with most similar products.
the number of opening and closing times is not less than 1000 (tested at 20℃).
this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.

Check Stock

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

SMALL AND LIGHT: This current transformer Built-in input coil.
SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
AC 220v, 380v power supply can both be applied..
MINI SIZE:This is a mini split base current transformer.
it's the smallest one compared to the similar products (output 100MA)..

Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..

Check Stock

Doorbell Transformer, 16.7 ft Charging Cable 18V 500mA Video Doorbell Power Supply Adapter Compatible with Ring Doorbell/Zmodo Doorbell (Black)

【Product Features】18V Doorbell Transformer, plugs into your standard 110 v/120 v outlet and converts to 18 volt 500 ma AC current. No more need to take your doorbell down to charge. Video doorbell Transformer can keep your device constantly powered..
【Compatibility】18V 500mA Doorbell Transformer compatile with Zmodo smart greet wifi doorbell / Nest Hello doorbell.(Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply.).
【Extra long cable】16.7ft is long enough, it can connect to your doorbell perfectly, don't worry about the distance between the socket and the doorbell..
【Easy to install】(Regardless of positive or negative polarity).Simply attach the two rings to the doorbell and tighten the screws. The wire ring design makes it easier to install and helps ensure the Transformer is firmly connected to the doorbell. The wires are sturdy and flexible enough not to be easily torn..
【After-sale service】: If you are not completely satisfied with our products, you can ask for a replacement or a full refund.If you have any questions, please feel free to contact us..

Check Stock