ReviewsOuter Tube

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

CPAP Hose Cover - CPAP Tube Covers - 6ft Wrap Skin - Softest Cover, Comfort with Zipper, No Condensation

  • Universal: CPAP hose covers 6 Ft Tube Wrap, Zippered Fleece Tubing Comfort, Fits Most CPAP, BiPAP Hoses and CPAP Tube. Outer layer made of super soft fleece..
  • Insulate and Protect: CPAP tube cover helps to insulate your cpap tube, helps prevent rainout (water condensation) in your resmed cpap tubing or philips respironics tubing, covering the tube keeps the tube warm, reducing condensation..
  • Eliminates Noise: Reduce the awful noise your cpap hose makes, when your cpap tubing comes up against harder surfaces such as your headboard or nightstand..
  • Reuse and Easy Installation: Designed to stay on your hose without snaps, velcro, zippers or ties. Lightweight and machine washable & dryable, Reuse..
Check Stock

Laboy Glass Vacuum Cold Trap 2-Part with 10 mm Serrated Hose 200mm Length Below The 24/40 Joint for Schlenk Line Organic Chemistry Lab Glassware

  • ...10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint..
  • USE----It is used to place between the experimental apparatus and the vacuum source to protect the vacuum pump,pump oil,pump pipe from contamination and the potentially damaging effects of the material,protect people who must work on the vacuum lines,prevent vapors from being emitted back into the reaction system.In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold.
  • DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm..
  • HEAVY WALL ---This lab glassware is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and coolin....
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • HIGHER COOLING PERFORMANCE-----A West condenser is a thinner version of the Liebig condenser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass acc....
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

PSCCO 10PCS Plum Blossom Shrapnel Bottom Plug Nut, Sunflower Nut Tube Inner Plug, Threaded Tubing Inserts Threaded Tube Inserts Round Tubing Inserts

  • Material: spring steel.Galvanized surface..
  • Metal star blades are designed to be inserted into steel tube feet..
  • When inserting the threaded insert into the tube, the star washer/clip usually bends to bend in the direction of entry. Then, the edge of the clamp bites into the inner diameter of the pipe to provide firm support..
  • The outer edge is flush with the outer edge of the pipe to provide a neat appearance..
Check Stock

Super Tube Sled Winter Snow Sledding Tube and Cover (Red)

  • ...ING DOWN - No matter how you ride, a Super Tube lets you take on the steepest hills, the toughest snow ramps, and land the nail biting jumps with confidence!.
  • COMMERCIAL SNOW TUBE - originally designed for commercial tubing parks, this snow tube offers the cushion of a snow tube with the speed of a fast sled.
  • -RUGGED OUTER SHELL WONT BREAK IN THE COLD- our sleds for snow adults heavy duty snow tube sill not break in the cold like some hard hard bottom tubes.
  • snow tubes for sledding kids, sledding intertube.
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser..
  • COMMONLY USED ----A liebig condenser commonly used in a distillation apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a distillation condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY ....
Check Stock

Bnineteenteam Aluminum Alloy Bicycle Seatpost Tube Adapter (27.2 30.4mm)

  • ?PREMIUM QUALITY:The seatpost is made of full CNC quality machining aluminum alloy, anti-slip, light weight and can be used for a long time..
  • ?6 DIFFERENT SIZE:Our product have 6 different seat post tube adapter, you can choose the bicycle seat tube to the size you want..
  • ?EASY TO INSTALL: Easy to install and remove, convenient for you to use..
  • ?WILD RANGE OF APPLICATION:This product is used with most bicycles, for example MTB bike, mountain bike, road bike, etc..
  • ?WARM-HEARTED TIP: Please check the outer diameter of your bicycle seat tube. Measure the inner diameter of the old clamp. Or measure the outside diameter of the seat tube. Then make the right choice..
Check Stock

4 Pcs 50mm (2 Inch) Round Plastic Plug ,Round Tubing Black Plastic Plug，Pipe Tubing End Cap for Round Tube Furniture Finishing Plug

  • The 2" round plastic plugs only fit 50mm (2 inch) outside diamefer round tubing or pipe. (not inside hole diameters ,not inside hole diameters) Designed to fit inside hole diameters from 1.81" to 1.93".with a wall thickness 0.020" - 0.060".（Refer the Size Picture）Select the plug size that matches the outer diameter of the tube, note that the outer diameter of the tube must match. there are certain errors in the size of round pipes and pipe plugs, which is a normal phenomenon, please check the size before buying..
  • Material: 50mm (2 Inch) round tube end cap plug Made of high-quality plastic, durable and wear-resistant. Waterproof and compressive wear proof..
  • Uses:black plastic cap Provides long lasting protection， great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliderschair leg protectors, patio furniture inserts, and much more..
  • The 2 Inch round threaded inner plug can be used as a durable solution for home or outdoor projects, including replacement of fence/door railing covers, trailer frame ends, rod tube rod caps, wrought iron steel decorative plugs or any round opening. Not easy to deform, firmer, not easy to fall off, easy to install..
  • We believe that our round Tubing Post ....
Check Stock

River Tube for Floating Heavy Duty Rubber Snow Tube | River Tube, Sledding Float | Pool Closing Inner Tube | Truck Inner Tubes (45')

  • SNOW TUBE FOR SUMMER & WINTER – Use as a durable snow sled in winter. Snow tube runs in your backyard, the snow-covered hill and much more! In summer, you can use it as a swim tube in the lake & pool or as a river tube in river..
  • SNOW TUBE SIZE - 45" outer diameter at full inflation. Although tube becomes firm at 32", please continue to add more air until tube is fully inflated. This size is ideal for people under 180 lbs. Adults over 180 lbs should choose a larger size..
  • SNOW TUBE RIVER TUBE - 100% COMMERCIAL GRADE RUBBER (latex free). When inflating the river tube, please align the included inflation tool with the valve, then turn clockwise until it can no longer be turned to avoid air leakage..
  • SAFETY VALVE STEM: No more being hurt by long metal stem of old-fashioned tube. Our innovative valve stem & cap is engineered for your safety. It can protect you from bruises. You are going to love it!.
  • QUALITY ASSURANCE - ZANGEROI produces the high-quality inner tubes on the market. We are proud of our workmanship. If you have any questions or you're not completely satisfied with what you receive, just send us an email. We'll make it right. We promise!.
Check Stock