ReviewsOuter Tube Assembly

MECCANIXITY Acrylic Pipe Rigid Round Tube Clear 12mm ID 16mm OD 305mm for Lamps and Lanterns,Water Cooling System

  • With high transparency, transparent acrylic tube has strong light transmittance when used in lamps and lanterns. When it is used for liquid transportation, the flow of liquid in the tube can also be clearly seen. Transparent PMMA tube is widely used for lamps and lanterns, water cooling system, building materials, handicrafts, DIY, and so on..
  • The acrylic plastic tubing, is in size of : 12mm/0.47-inch inner dia, 16mm/0.63-inch outer dia, 305mm/12-inch total length.
  • Round PMMA tube made in PMMA material, durable and long service life.
  • High transparency, high light transmission.
  • Rigid Round Tubing has very high impact resistance.
  • Steps of installation:1.Prepare PMMA pipe of an appropriate size.
  • Please Note : Please select the appropriate size of acrylic pipe, especially the size of inner diameter and outer diameter.
Check Stock

MECCANIXITY Acrylic Pipe Rigid Round Tube Clear 86mm ID 90mm OD 200mm for Lamps and Lanterns,Water Cooling System

  • With high transparency, transparent acrylic tube has strong light transmittance when used in lamps and lanterns. When it is used for liquid transportation, the flow of liquid in the tube can also be clearly seen. Transparent PMMA tube is widely used for lamps and lanterns, water cooling system, building materials, handicrafts, DIY, and so on..
  • The acrylic plastic tubing, is in size of : 86mm/3.39-inch inner dia, 90mm/3.54-inch outer dia, 200mm/8-inch total length.
  • Round PMMA tube made in PMMA material, durable and long service life.
  • High transparency, high light transmission.
  • Rigid Round Tubing has very high impact resistance.
  • Steps of installation:1.Prepare PMMA pipe of an appropriate size.
  • Please Note : Please select the appropriate size of acrylic pipe, especially the size of inner diameter and outer diameter.
Check Stock

PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs

  • PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
  • Easy to install:connecting by the outer thread of the quick fitting.
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock

Heavy Duty Mist Spray & Stream Sprayer Replacement Tops 4 pack Fits Standard 8oz / 16oz

  • 4-SETTING SPRAYER: 4 Settings with Spray, Stream, and Off.
  • QUALITY PLASTIC CLOSURE: BPA Free Heavy Duty Plastic.
  • 28-400 BOTTLE MOUTH SIZE: Fits bottles where mouth of bottle measures 28mm from outer edge to outer edge such as 8oz or 16oz boston round bottles and....
  • 6-INCH DIP TUBE: tube can be cut to your bottle’s length.
Check Stock

CPAP Tube Hose Cover - Wrap Fleece Skin - Full Length Zipper - Prevent Rainouts (6 Foot)

  • UNIVERSAL - 6 Foot wrap fits nearly all CPAP and BIPAP Tubes. Outer layer made of super soft fleece. Inner layer made of durable polyester..
  • INSULATE AND PROTECT - Using the Mars Wellness CPAP Tube Cover helps to insulate your tube, preventing condensation also known as rainouts, covering the tube keeps the tube warm thereby reducing condensation..
  • SLEEP SOUND - Using a CPAP tube cover is known to eliminate noises made when your tube comes up against harder surfaces such as your headboard or nightstand..
  • EASY INSTALL - Mars Wellness 6 Foot CPAP Tube Cover is easy To install. Designed with a durable full length zipper allows you to wrap around your tube with no trouble..
Check Stock

CPAP Tube Hose Cover - Wrap Fleece Skin - Full Length Zipper - Prevent Rainouts (8 Foot)

  • UNIVERSAL - 8 Foot wrap fits nearly all CPAP and BIPAP Tubes. Outer layer made of super soft fleece. Inner layer made of durable polyester..
  • INSULATE AND PROTECT - Using the Mars Wellness CPAP Tube Cover helps to insulate your tube, preventing condensation also known as rainouts, covering the tube keeps the tube warm thereby reducing condensation..
  • SLEEP SOUND - Using a CPAP tube cover is known to eliminate noises made when your tube comes up against harder surfaces such as your headboard or nightstand..
  • EASY INSTALL - Mars Wellness 6 Foot CPAP Tube Cover is easy To install. Designed with a durable full length zipper allows you to wrap around your tube with no trouble..
Check Stock

Xfactor Hydro XFUV10BLK 10ml LOCA UV Glue - Premium Grade LOCA (Liquid Optical Clear Adhesive) - Low Viscosity !!

  • ... tube. Using a smaller volume like 5ml may not yield enough adhesive in case you make mistakes and need to try again..
  • DESIGNED FOR SMART PHONE SCREEN REPAIR: STICKY-iCKY 1000 Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer in a smart phone or tablet display assembly. Compatible with ALL touchscreen devices, phones and tablets needing LOCA to attach glass and/or digitizer to LCD.
  • PROFESSIONAL GRADE, ULTRA LOW VISCOSITY adhesive dries clear! - 2000mPa*s viscosity (general LOCAs average 5000mPa*s). Thanks to such LOW VISCOSITY, bubbles/voids can be easily removed, smaller amounts of glue can be used, easier to clean, flows well, & cures with NO YELLOWING EFFECT, GUARANTEED!.
  • EXCELLENT GAP FILLING & HIGH LIGHT TRANSMITTANCE: Xfactor UV GLUE LOCA fills fine scratches that may occur upon removing the old adhesive. Xfactor UV GLUE eliminates mirror effect, rainbow effect, poor contrast, and low brightness, while improving touch sensitivity for that OEM look and feel you so desire!.
  • BLACK LIGHTPROOF TUBE ensures adhesive will remain in a liquid state, rather than harden like transparent tubes. Note: LOCA is sensitive to UV. Exposure to sunlight will cure adhesive, which is why all our tubes are black.
Check Stock

DADAKEWIN 120mm Allihn Condensers, Joint 14/23, 3.3 Borosilicate Glass Standard Ground Mouth Heat Resistant Scientific Lab Condensers- Pack of 1 (Capacity : 120mm)

  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Made of 3.3 Borosilicate Glass, high temperature & corrosion resistance..
  • the Allihn condenser is designed with an inner tube consisting of a series of bulbs which increase the surface area available for vapor condensation surrounded by an outer jacket tube, the cool water flows through the outer jacket to condensate the vapor in the inner tube..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
  • Model Number: Allihn condenser 120mm 14/23.
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

3PCS Pool Floats Adult Set - Unicorn + Flamingo + Watermelon Inflatable Beach Floaties Swimming Ring Toys for Adults, Kids 8-12,Teenager Water Party Supplies

  • 3pcs pool floats - You will get 1 unicorn pool float,1 flamingo pool float and 1 watermelon pool float(as a gift for kids),Enjoy your summer holiday with these inflatable pool floats..
  • Includes repair patches -The package comes with repair patches for convenience.The watermelon pool float inflatable inner tube size 13.4",the inflatable outer tube size 29.1".The unicorn and flamingo floats inflatable inner tube size 14.6",the inflatable outer tube size 37.4"..
  • Easy to inflate - Made of premium polyvinyl chloride.Inflate with air pump or compressor(Not included).Note:Keep safety when using high pressure pump..
  • Pool floats for kids&adults - The unicorn and flamingo are fit adults,the watermelon is for younger kids.Suitable for the entire family to enjoy a summer blast.Choose these for birthday present,summer gift,swimming pool party decorations,beach,lake and any summer themed parties..
  • Warm tips:It might have smell when you open the package.Just air them out for 1-2 days.The smell would go away.Please ensure that the kids use under competent adult supervision..
Check Stock