ReviewsOutput 24v

DC 24V Power Cord Converter Cable for ResMed AirMini 24V Power Charging Cable DC Port 5.5 x 2.1mm 5.5 x 2.5mm

  • Only Use for the ResMed AirMini !! Not compatible with other machines.power from 24V Pilot-24 Lite /CPAP Battery Backup Power Supply/ Power Bank for....
  • Please use the 24V output battery to run your ResMed AirMini. Don't use it with 12V output Battery!.
  • DC Port Size: 5.5*2.1mm, comes with 5.5*2.1mm to 5.5*2.5mm convert plug,compatible with more power supply devices (pilot-24 lite cpap battery)..
  • the power cable connect Airmini to Battery, Works perfect with 24v TalentCell Batteries and Resmed Airmini.
Check Stock

ALITOVE 24V DC Power Supply 2A 48W AC/DC Adapter 100~240V AC to DC 24 Volt 2 Amp Converter 24 vdc 2000mA 1.8A 1.5A 1.3A 1.2A with 5.5mmx 2.5mm 2.1mm Plug for LED Strip Light CCTV Camera DC Pump Fan

  • Works with device that draws less than 2A, such as 500mA, 1A, 1.2A, 1.4A, 1.5A, 1.6A, 1.8A, 2A..
  • DC plug connector external diameter is 5.5mm, internal diameter is 2.1~2.5mm. Comes with a female DC barrel connector. You can easily screw wires on it without soldering..
  • Safety protection: automatically overload cut-off, over voltage cut-off, over temperature cut-off, short-circuit cut-off..
  • Sufficient 48W output power and stable 24V output voltage will protect your electronic devices from destruction..
  • It is perfect for 24V devices less than 48W, such as 5050 2835 24V LED light strip, CCTV camera, security surveillance system, Bluetooth speaker, DC motor water pump..
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

MGGi Waterproof DC/DC Converter 12V Step Up to 24V, Boost Converter 20A 480W Voltage Regulator, Power Adapter Voltage Booster,Power Supply Module Boost Transformer for Car Truck Vehicle Boat

  • Wide DC boost converter regulator DC 12V to DC 24V 20A 480W - input voltage range DC 11-16V.
  • 5 Safty Protections - Over-load, Over-current, Over-temperature, Short-circuit, Over-voltage.
  • Auto-recovery when device is back to normal operating, over 100,000 hours lifetime..
  • Wide application - fits for car, truck, vehicle, boat, electric bike, bus, cmb, club cart, LED strip lights, display moniter screen of taxi, car radio audio device, LCD TV, DVD, IP camera, speaker system, GPS, air-conditioner, electric fan and any 24v DC appliances. (Note: Never connect to solar panel or wind turbine. Never charge the battery.).
  • Waterproof and portable - with aluminum alloy shell, silicone gel package, IP68 waterproof rating, 100% waterproof , can work in rain.
  • High and stable conversion efficiency - synchronization rectification technology-multiple intelligent protection function. Die-cast aluminum shell, expoxy potting, cooling by free air convection. High conversion effici....
Check Stock

TalentCell 12/24V Lithium ion Battery Pack PB240B2, Rechargeable 35000mAh 129.5Wh Li-ion Batteries with DC 24/12 Volt and 5V USB Output for LED Light Strip, CCTV Camera, Smartphone and More

  • Output: 24V (29.4V-21V. Same Voltage Compare to 24 volt Lead Acid Battery) /5A Max. 12V/2.5A Max. (12V output voltage can maintain a constant 12V, but the 24V output port voltage is not constant.), 5V/2.4A Max. Input: 29.4V/0.95A. High battery capacity: 3.7V/ 35000mAh. PB240B2 24/12/5 volt lithium ion battery pack is constructed from 14pcs 18650 cells in 7s2p..
  • NOTE: Please make switch on of the battery before connect AC-DC charger with battery to avoid ELECTRIC SPARK. NOTE: Please confirm your device voltage and power before you use this lithium battery pack. Low voltage devices can't be plugged into the high voltage output port. Otherwise, it might damage your equipment..
  • Compatible with LED strip light products, CCTV Camera, LED Panel, Modem, Speak, Car DVR, Spectra S2 breast pump or Telescopes, Smartphones, Aromatherapy Essential Oil Diffuser Cool Mist Humidifier, etc. If you are not sure if the battery can power to your machines, please contact us for technical support..
  • Supports Over-charged/discharged, Over-voltage, Over-current and Short circuit protection. When a load is connected to the battery, the battery shuts off, it may be over-current or short circuit protection, You just need to connect the charger to charge it and the battery will retu....
Check Stock

iGuerburn 24V DC Adapter for Resmed Airsense 10 Series, DC5521/DC5525 S10 CPAP Power Cord, DC Converter Work with Power Station Rockpals Progeny Medistrom

  • This 24V dc adapter only works for Resmed Airsense 10 series CPAP machine: Airsense 10 CPAP, Airsense 10 Elite, Airsense 10 AutoSet, Airsense 10 AutoSet for Her.Please don ’t use this resmed airsense 10 power cord with a 12v battery!.
  • The resmed s10 dc to dc converter can work with 24v power station with dc5521/dc5525 output socket. Such as: Medistrom Pilot-24 Lite, PROGENY 300w,Talentcell PB120B1, Progeny 300w..
  • Our airsense 10 dc adapter is 3.3ft, it’s easy to carry and long enough outdoors when you are camping. This resmed airsense 10 dc converter also can be bent at will..
  • This resmed airsense 10 dc power cord only works with some 24v battery with dc5521 / dc5525 output socket..
  • The Package includes: 1 Airsense 10 dc cable (DC plug size: 5.5mm x 2.1mm) + 1 connector (5.5mm x 2.5mm), please check the size of your battery pack output port before purchasing in order to work your airsense 10 cpap machine well..
Check Stock

ALITOVE 24V 6A Power Supply Adapter Converter 100-240V AC to DC 24 Volt 144W 6Amp 5.5A 5A 4A Transformer with 5.5x2.5mm Plug for LED Strip Light CCTV Camera LCD Monitor Massage Chair

  • Works with device that draws less than 6A, such as 500mA, 1A, 2A, 3A, 3.5A, 4A, 4.4A, 5A, 5.5A, 6A..
  • DC plug connector size is 5.5mm x 2.5mm. Compatible with 5.5mmx2.1mm. Connector polarity is internal positive "+", outside negative"-"..
  • Safety features: Automatic overload protection, over-voltage protection, over-current protection, over-temperature protection, short circuit protection..
  • Ample 144W output power and 24V stable output voltage will protect your electronic devices from destruction..
  • Widely used to drive LED strip light, water purifier, CCTV camera, LCD monitor, massage chair, DC motor, DC bump and other 24V devices less than 144W..
Check Stock

K-MAINS AC Adapter Charger for Jebao RW-4 RW-4P PP-4 RW4 PP4 Power Supply Cord Mains PSU

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New Global 24V AC / DC Adapter Compatible with Jebao Jecod WP-10 WP-10P RW4 WP10 P WP10P RW 4 Aquarium Wave Maker Powerhead Pump 24VDC 1000mA....
  • Compatible with: Jebao ECO SW-4 SW4 10W 10 W Propeller Pump Marine Aquarium Wireless Wave Maker Tank Pump.
  • Compatible with: Jebao OW-10 12W OW10 DC24V 12 W Wave Maker Flow Pump WaveMaker Controller Marine Reef Aquarium.
  • Compatible with: Jebao SLW-10 10W SLW10 DC24V 10 W Sine Wave Maker Pump Flow Wavemaker Fish Aquarium Water Pump Sine Driver.
Check Stock

Replacement AC DC Adapter for Resmed S10 Series, Power Supply for Resmed S10 BiPAP Machines 370001

  • HZPOWEN products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specifications..
  • Compatibility: New Global 24V AC / DC Adapter Replacement for Resmed S10 Series Air CurveBiPAP Machines 24V DC 3.75A.
  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition..
  • Service and Support: 30 Days Money Back Guarantee and Two year warranty. Please contact us with any questions or concerns.
Check Stock

iGuerburn 2-Pack 24V DC Adapter for Resmed Airsense 10 Series, DC5521/DC5525 S10 CPAP Power Cord, DC Converter Work with Power Station Rockpals Progeny Medistrom

  • This 24V dc adapter only work for Resmed Airsense 10 series CPAP machine: Airsense 10 CPAP, Airsense 10 Elite, Airsense 10 AutoSet, Airsense 10 AutoSet for Her.Please don ’t use these resmed airsense 10 power cords with a 12v battery!.
  • The Resmed s10 dc to dc converter can work with 24v power station with dc5521/dc5525 output socket. Such as: Medistrom Pilot-24 Lite, PROGENY 300w,Talentcell PB120B1, Progeny 300w..
  • Our airsense 10 dc adapter is 3.3ft, it’s easy to carry and long enough outdoors when you are camping. This resmed airsense 10 dc converter also can be bent at will..
  • These resmed airsense 10 dc power cords only work with some 24v battery with dc5521 / dc5525 output socket..
  • The Package includes: 2 Airsense 10 dc cable (DC plug size: 5.5mm x 2.1mm) + 2 connector (5.5mm x 2.5mm), please check the size of your battery pack output port before purchasing in order to work your airsense 10 cpap machine well..
Check Stock

BiXPower 12V to 24V Fan-Less Converter Compatible with ResMed AirSense 10 Series CPAP Machines - DM90S10

  • This BiXPower DC power adapter can convert 12V DC (Range 10V ~ 30V) power to 24V DC power with special configuration cable and a special connector that is compatible with ResMed Airsense 10 devices. This DC Converter works for AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed..
  • Features: Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm).
  • Acceptable Input Voltage: 10V ~ 30V DC -Output Voltage: 24V.
  • Maximum Output Power: 90W. -USB output: 5V , 2.4A.
  • Package Contents: 12V to 24V Power Converter x1.
  • Special Output Cable for ResMed S10 series x1.
Check Stock