ReviewsOval Gear Flowmeter

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

Grover Electric Guitar Tuning Key (305C)

  • Package includes: 6 pieces (6 Right Hand) locking guitar tuners pegs, 7 mounting screws and 6 threaded bushing, good replacement compatible with LP, SG, TL Style electric, folk or acoustic guitars..
  • Guitar sealed tuning machines with heavy duty internal gear, sturdy and convenient. Easy to install, easy to replace your old or dirty guitar tuning pegs..
  • Guyker locking tuners help to provide finer tuning and greater stability..
  • Oval shaped button with sealed housing. Chrome plated..
  • Gear Ratio - 1:15, designed to fit modern 9mm headstock holes. Please check the parameter drawing in the attached pics before placing your order..
Check Stock

OL'MAN TREESTANDS Alumalite CTS Climbing Stand, Aluminum Construction with 21' Wide Net Seat

  • FEATHERLIGHT TREESTAND: Bowhunters and gun hunters have plenty of gear to haul in and out of the woods. The Alumalie CTS is built to be lightweight, offering hunters an easier option to get up in the trees and start hunting..
  • OVAL TUBING: The OL’MAN Alumalite CTS Treestand uses oval tubing in its construction. The oval shape is a much stronger shape than round tubing and is less likely to become misshapen over time. This offers hunters years of excellent use..
  • COMFORT: The Alumalite CTS features patented ComforTECH seating with a seat width of 21-inches. Hunters can look forward to a comfortable experience in the trees for hours. Entry and exit are super easy with the new improved tubing style foot straps..
  • SPECIFICATIONS: Weight: 21-pounds. Weight Limit: 300-pounds. Seat width: 21-inches. Platform size: 18-inches x 32-inches. Aluminum construction..
  • SUPERIOR HUNTABILITY: From our lightweight design to our rugged durability, OL’MAN Treestands are the highest quality treestands on the market today. We’re focused on customer service and comfort and stand behind everything we build..
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

Shimano Baitrunner 4000D Offshore Saltwater Spinning Reel

  • This classic live bait reel features a secondary drag system that allows free spooling with the bail closed and allows your bait to move naturally.
  • Utilizes an oval oscillation gear that provides a consistent spool speed which results in an even line lay that provides excellent casting and....
  • Better casting, better line lay, less backlash wind knots or tangles, less friction on the line, larger, more comfortable grips, a higher max drag as....
  • Offers Dyna-Balance technology that eliminates wobble during the retrieve by counterbalancing the rotor to enhance sensitivity and smoothness while....
  • Max Drag: 15 lbs. / Gear Ratio: 4.8:1. / Weight: 13.5 oz. / Line Retrieve: 28" / Bearings: 3BB + 1RB â PowerPro Line Cap: 15 / 270, 20 / 190, 40 /....
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

Sienna C3000 FG Sienna

  • This classic live bait reel features a secondary drag system that allows free spooling with the bail closed and allows your bait to move naturally.
  • Utilizes an oval oscillation gear that provides a consistent spool speed which results in an even line lay that provides excellent casting and manageability.
  • a higher max drag as well as a wider range of baitrunner settings than its predecessors.
  • Offers dyna-balance technology that eliminates wobble during the retrieve by counterbalancing the rotor to enhance sensitivity and smoothness while eliminating vibrations caused by the reel.
  • Max drag: 20 lbs. / gear ratio: 4.8:1. / weight: 21.7 oz. / line retrieve: 36" / bearings: 3bb + 3rb – powerpro line cap: 40/295.
Check Stock

Blue-White Flowmeter for 4 in. PVC Pipe, Horizontal Installation

  • F-300 Acrylic Flowmeter Dual GPM/LPM scale printed on both sides of the meter.
Check Stock

Blue-White Professional Series Flowmeter for 2.50\ Pipe NSF 50 Listed

  • F-300 Acrylic Flowmeter Dual GPM/LPM scale printed on both sides of the meter.
Check Stock

Environmental Express QuikVap® Evaporating System; 240 VAC

  • Evaporate to dryness or concentrate for further analysis.
Check Stock