ReviewsOverload Pump

Green Expert 1/4HP Submersible Sump Pump 2500GPH Max Flow Manual Automatic On Off Adjustable Float Switch 25-Foot Power Cord Easy Use Household Drain Pump to Empty Pools Hot Tub Flooded House Garden

【Efficient Water Removal Pump】Oil-free PSC motor with thermal overload protection produces 1/4HP output power for increased reliability and longer motor life. Pump has the ability to lift water up to Max. 20 feet of vertical height.
Removes water up to 2500 gallons per hour at zero feet, 31 gallons per minute at 10 ft of discharge lift..
【2 in 1! Manual/Automatic Adjustable】This utility water pump can be adjustable usage mode between manual and automatic on/off as you wish. You can use it in automatic on/off operation and just leave it at work, or you can freely choose the simple plug-in operation to remove water completely. With the lock design, floater can be fixed in up status that would keep pump always run, but you have to plug off manually in case of run dry..
【Simple to Install with Hoses】The adapter kits of pump allow you to connect hoses easily: 1”, 1-1/4", 1-1/2" hold discharge hoses for high capacity pumping.
3/4" GHT, 1-1/2" NPT(pump outlet) connect threaded hoses for quickly installation. *This item can NOT be compatible well with expandable hoses that would cause poor flow..

【Self-priming Design】Capable of self-priming up to 9 vertical feet, it is a perfect fit to be mounted above the tank. A handy tool for domestic use, garden irrigation, camping, it is a good deal for you..
【On-demand Pressure Switch】-This automatic shut-off pressure switch can turn on and off under water pressure. It is approved for usage in potable water..
【Cautions & Attentions】Pay extra attention to the leakage around the outlet, if any. Minor leakage will gradually releases the pressure from 45psi to 20 psi and the pump will restart all over again..
【Complete Spare Accessories】-A ready-to-go set which also includes NPT Female-male filter*1, thread connecter*2 and hose adapter*2 for immediate operation..
【Overload Thermal Protection】-The overload thermal protection safeguards the pump from damages due to overheat. After cooling down for 20-30 mins, the pump will resume work automatically..

Rugged Motor - designed for long life, continuous 24/7/365 operation..
Motor housing is corrosion-resistant stainless steel. Pump casing is made from abrasion resistant , fiber reinforced plastic for maximum life..
The Vortex design of the pump keeps it clog free making maintenance easy..
Built-in overload and overheat motor protection enhances life of the pump..
Its compact design is perfect for use in skimmers. Has 2” female threaded outlet..

Not oil filled- fish safe biodegradable oil for bearings only.
High quality seals for long and efficient pump life.
Overload sensor shut-off protection to keep pump from over heating or burning out.

Overload valve protects pump and operator..
Foot pump hydraulically raises platform & & hand lever design. The hydraulic pedal design would keep your hands free and save energy. The hand lever is for easy, controlled hydraulic release. It is easier to control the cargo and table..
Polyurethane casters: 2 swivel with brake, 2 rigid..

Durable cast iron pump housing built to withstand the wear and tear of rough operating environments.
Removable junction box allows for easier installation.
Thermal overload protection prevents motor from overheating during abnormal usage.
Pump is capable of pumping fluid out of an 8' deep storage tank at sea level.
Rugged switch lever is designed to endure heavy abuse.

MANUAL HYDROPONICS PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7 lbs. with built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1500 GPH, 115-Volt, 25-foot cord, manual operation, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI.

MANUAL UTILITY PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7.75 lbs. and equipped with a built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1200 GPH, 115-Volt, 10-foot cord, manual operation, 5.0 running Amps, 380 Watts, 26.3 Ft. Shutoff, 11.4 PSI.

DEPENDABLE & DURABLE PUMP: Made with durable cast iron construction to withstand rough operating environments, every 4200 series pump includes a limit lifetime warranty..
EASY INSTALLATION: The fuel pump has a removable junction box that rotates 180-degrees for ease of electrical wiring and installation in tight spaces..
PROTECTION AGAINST OVERHEATING: Engineered to exceed the industry’s most stringent safety standards, the pump is constructed with thermal overload protection to prevent the motor from overheating during abnormal usage..
CONSISTENT HIGH PERFORMANCE: 4200 series Fill-Rite pumps are built with Rotary Vane Technology that maintains a consistent flow performance even as components wear from use..
MOBILE APPLICATIONS: Designed for 12V battery powered bung mounted transferring from fuel tanks on trailers or trucks, the 4200 series will pull fuel at tank depths of 8 ft. and discharge fuel up to heights of 37 ft..