ReviewsOxy Acetylene Torch 2

Hromee Oxygen Acetylene Hose 1/4-Inch × 50 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
1/4” × 50FT: The length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these make it ideal for long term use..
COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..

Check Stock

Hromee Oxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
1/4” × 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use..
COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..

Check Stock

HARRIS SSBF5 Stay Silv Brazing Flux, 5 lb. Jar, Black

For general purpose brazing rod for repair of most ferrous and or non-ferrous metals.
For use with lawn equipment, sheet metal, tanks.

Check Stock

Hot Max 24000 Brazing Flux Powder 8-Ounce

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

Check Stock

RX WELD Air Acetylene Torch Kit Fuel Gas kit Professional Series

...uction】 This cutting torch is constructed with high-quality alloy, stainless steel and durable brass for long-term use durability. The universal torch handle match perfectly with external thread type welding tips and is ergonomically designed for better grip and operation..
【Excellent Performance】 The oxygen & acetylene welding cutting torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. The operator can change the flame length according to his exact requirements by adjusting the oxygen and gas valves on the torch body..
【Safe & Easy to Operate】 The acetylene torch kit control adjustments are easy to operate, making your welding job so much easier. The Oxygen & Acetylene regulator includes 2.5" diameter gauges to display accurate pressure, so you can easily adjust your gas flow rate with the built -in flow meter. The built-in check valves eliminate the reverse flow of gases, increasing safety..
【Multiple Applications】 The torch kit is easy to handle and can be used in a wide range of fields. This welding torch tool set is a great choice for both an amateur metalworker or a professional. It's perfect for a multitude of applications such as farm, ranch, hobby metal store, construction site, automotive....

Check Stock

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
Joining all brazable grades of aluminum and copper.
Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
Aluminum to Copper, Aluminum to Brass or plated terminals.
HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..

Check Stock

US Forge Welding Gas Welding Rods Flux Coated Low Fuming Bronze Brazing Rod 1/8-Inch by 18-Inch .8-Pound #02232

For general purpose brazing rod for repair of most ferrous and or non-ferrous metals.
For use with lawn equipment, sheet metal, tanks.

Check Stock

Single Flint Spark Striker 2 Pack, Gas Welding, Cutting, Brazing, Joining, Oxy Acetylene, Set Includes 2 Strikers, by Tech Team

Light oxy-acetylene, and other gas torches quickly and effectively..
Simple operation. Reliably produces bright orange sparks to effectively light oxy-acetylene and other gas torches..
Set includes two (2) spark strikers. Each spark striker comes with one (1) flint..

Check Stock

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
Constructed with high strength alloy, heavy duty stainless steel and durable brass.
Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.

Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..

Check Stock

Mini Oxygen Torch Kit, Micro Oxygen Acetylene/Butane Gas Welding Torch with 5pc Tips for Jewelry Repair

【High Performance】This mini torch can work with propane, acetylene, hydrogen, propylene, natural gas etc to finish jewelry repair work.Two connectors mix the oxygen and acetylene ( gas), to get high performance welding flame. The green one connect with oxygen and red connect gas (Acetylene/Butane/Propane).
【Multiple Tips】Equipped with 5pcs replacement tips to meet different application accordingly . The 5pcs tips are 1/8, 3/8, 5/8, 3/4, 7/8(mm)..
【Micro Torch】Micro oxygen torch with 2M long trachea to realize various requirements of cutting ,welding/soldering work,easy to use. Dual connectors , mix oxygen with propane/ acetylene/ butane to get strong welding torch..
【Temperature】Max. Temperature can reach 1700°C (3092°F). with this temperature,can easily melt/cut metals iron, gold, silver and copper..
【Widely Application】Suitable for welding kinds of precision product, such as goldsilverK goldplatinumpalladium pperlead tin alloy and some other crafts.such as welding, jewelry repair and construction, crafts, metal sculpture, glass blowing, and electronics repai....

Check Stock