ReviewsOxygen Sensor Socket Rack

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

AP1822F 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side Preventing Damage to Wires

  • DESIGN: Our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact....
  • QUALITY:This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures....
  • FUNCTION: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's....
  • FEATURES:Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen....
  • LIFETIME WARRANTY - This air door actuator comes complete with a lifetime warranty. If the part ever fails simply contact us for a replacement for....
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines.
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors.
  • Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
  • Use with any 3/8 inch drive ratchet or breaker bar.
  • High-performance chrome molybdenum steel construction.
Check Stock

7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool (Red, 7PCS)

  • 【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion..
  • 【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut..
  • 【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

234-4078 13138 Oxygen O2 Sensor Downstream Compatible with Chrysler 300M Concorde Intrepid Sebring Stratus 2001 2002 2003 2004, Dodge Dakota Durango Jeep Cherokee Wrangler 1997 1998 1999 2000

  • ▲003cbr003e003cbr003eIMPORTANT: Carefully check fitment of Amazon, list description and part pictures. Must make sure our part pictures are same as yours. Because The first two could not identify vehicle months & engine difference. If pictures (body,socket,plugs) are same, certainly the part will fit your car. Or If you have part no., please make sure the part no. is among our Interchange part number list. If yes, the part usually fits your car. So the pictures or part no. are more important.003cbr003e.
  • ▲This O2 lambda sensor fits Oxygen Sensor O2 Lambda fits 234-4078 13138 for 300M Concorde Sebring Dodge Dakota Durango Intrepid Stratus Jeep Cherokee Grand Cherokee Wrangler Selected 1996 1997 1998 1999 2000 2001 2002 2003 2004..
  • ▲1 year warranty! Compatible OEM part number of this oxygen sensor is 13138, SG1820, SG1815, 234-4078, 2344078, 2344078, 234-4076 , 234-4010, 234-4614, 234-4082, 234-4077, ES20045, ES20207, ES20044, ES20137, ES20149..
Check Stock

Oxygen Sensor Replace OE Part # Bosch 17014 17315 Upstream Oxygen Sensor

  • Fitments: The 17014 oxygen sensor is fit for 2004-2006 Rolls-Royce. Please double check the fitment before your purchase. And you can get a more....
  • Replace OE #: The Apeixoto oxygen sensor is designed and manufactured with OE standard and can be replaced directly with fitted vehicles. The....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping..
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock

Walker Products 350-34039 Oxygen Sensor Original Equipment Replacement Downstream Upstream O2 Sensor 1 Pack

  • Walker Products Oxygen Sensor Program is the Industry Leading OEM and Aftermarket Oxygen Sensor ( O2 Sensor ) Program.
  • Walker O2 Sensor is Manufactured to meet and exceed OE specifications.
  • increase fuel efficiency, decrease emissions,....
  • Backed by Walker Products buyer protection for worry free installation and performance.
  • Fitment: 2001-2020 Chrysler Dodge Jeep Mercedes-Benz Mitsubishi Ram Volkswagen Oxygen Sensor O2 Sensor.
  • Replacement: 15510 Oxygen Sensor, 234-4547.
Check Stock

MARSFLUX Oxygen O2 Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires

  • 【Compatible】O2 Oxygen Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires. OE:250-25001. Please enter the year, make and model number....
  • 【Professional Manufacturing】 O2 oxygen sensor is manufactured in strict ance with the original standard, stable performance, excellent....
  • 【Excellent Quality】 The oxygen sensor is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones,....
  • 【Operating Principle】The role of the oxygen sensor is to determine whether there is excess oxygen in the exhaust after engine combustion and to....
  • 【Fast Shipping & Warranty Commitment】O2 oxygen sensor shipped directly from the USA within 2~5 working days, warranty 2 years. Please enter the....
Check Stock