ReviewsPaint Thinner Gallon

tamiya

X designated colors have a glossy finish while XF designated colors are flat finish..
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner..
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish..
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish..

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

...m the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with....
Provides superior corrosion protection on all underwater metals.
Fast drying, with no sanding needed between coats.
Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.

...atin finish, build with coats of Gleam Gloss varnish and use Gleam Satin for the final coats.
SELF-LEVELING FINISH DRIES FAST: Recoat in 1 hr. @ 72°F.
if desired, thin 5-10% with TotalBoat Special Brushing Thinner 100 (brush/roller application) or 10-20% with TotalBoat Spray Thinner 101 (spray application).
AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes.
Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

...atin finish, build with coats of Gleam Gloss varnish and use Gleam Satin for the final coats.
SELF-LEVELING FINISH DRIES FAST: Recoat in 1 hr. @ 72°F.
if desired, thin 5-10% with TotalBoat Special Brushing Thinner 100 (brush/roller application) or 10-20% with TotalBoat Spray Thinner 101 (spray application).
AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes.
Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints.
Provides superior corrosion protection on all underwater metals.
Fast drying, with no sanding needed between coats.
Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.

...m the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.

High-build two part epoxy primer and barrier coat for use above and below the waterline.
Excellent for gelcoat blister prevention and repair work on fiberglass boats.
Provides superior protection on all underwater metals.
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..

Can be mixed into any kind of paint or coating. Does not change the properties of the paint it is added to..
Reduces heat and cooling loss by providing insulation benefits..
One quart by volume of ceramics is added to one gallon of paint or coating..
Product is sold in packages according to how much paint you will be using. A 1 gallon package will treat 1 gallon of paint, 12 gallon package will treat 12 gallons of paint, etc.