ReviewsParallel Shaft

Quartex Spacekid & Andre Wildenhues Extended

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable....
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick....
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and....
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Antrader 6-Pack 5mm to 8mm Aluminum Alloy Flexible Shaft Coupling Joint Connector Rigid Stepper Motor Wheel Coupler with Screw

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

#1 World Long Drive Tour 48 Inch Tantrum Competition PGA Shaft R,S,X,2X,3X or 4X (XX-Stiff)

  • #1 World long drive tour 48 inch tantrum competition PGA shaft..
  • This shaft is very long & accurate!!! Tantrum dominates long drive competition..
  • Perfect for golfers looking to compete in long drive competition, and those who want to add distance..
  • Used in REMAX Long Drive Competition and LD Competition Around The World..
  • Available Flexes : R, S, X, 2X, 3X or 4X (.335 Parallel Tip, 48" Length).
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

Saturn 12v 65 Lbs or 1 HP Thrust Short-Shaft Electric Tolling Motor For Inflatable Boats, Kaboats, Kayaks and Canoes

  • 26'' Shaft, High-Performance, Ultra Light 12V 65 Lbs Brushless Trolling Motor.
  • Ultra Portable, Folding Tiller Handle. Only 15 Lbs! Extendable Handle-Can be extended to 12" for much better control.
  • Very unique feature of this trolling motor is a tilting throttle handle with 10 adjustable positions.
  • Adjustable handle allows it to be lifted almost 45 degree up, or all the way down, parallel to the motor shaft.
  • Our new brushless 65 pound of thrust trolling motor model uses 12V, with 50 Amp Max Draw.
Check Stock

Mizuno Unisex Running Volleyball Shoe, White Legionblue Ceramic, 12 US Men

  • Shaft measures approximately low-top from arch.
Check Stock

ASICS Men's Upcourt 4 Volleyball Shoes, 9, Black/Pure Silver

  • Shaft measures approximately low-top from arch.
Check Stock

High Torque Long Shaft Clock Movement Mechanism with 2 Different Pairs of Hands (Color Set 1, Shaft Length 9/10 Inch/ 23 mm)

  • Clock parts kit: high torque I shaft clock with metal hook, the shaft can drive long clock hands (10 mm to 450 mm), suitable for repairing, replacing or making a clock.
  • SA0856 SA1036 SA1054: Clock mechanism size: total shaft length is approx. 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches).
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panelSA1026 SA1035 SA1053: Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch).
  • Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inch and 93 mm/ 3.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 127 mm/ 5.0 inches, the second hand is approx. 100 mm/ 3.9 inches, second heads is approx. 7 mm/ 0.28 inches.
  • Warm note: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase.
Check Stock

Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

140pcs Key Stock Pulley, Stainless Steel Woodruff Key Assortment, Metric Key Stock Assortment, Shaft Feather Key, Keyway, Parallel Key, Shaft Key Set for Fastening Many Different Equipments

  • 【High-quality Stainless Steel】: This round ended feather key is made of high-quality stainless steel, which has good wear resistance and durability.
  • 【High Expansion Capacity】: This stainless steel key stock assortment has high expansion capacity, good durability and suitable for a long time.
  • 【Smooth Surface】: The surface of this parallel drive shaft keys is smooth and burr-free, with superb workmanship.
  • 【With Plastic Box】: This key stock assortment is equipped with a portable plastic box, which can be easily identified and stored.
  • 【Wide Application】: There are 140 stainless steel parallel keys which mainly used to fix frequently disassembled equipment.
Check Stock