ReviewsParking Brake Replacement Handle

Powerbuilt 648633 Internal Snap Ring Pliers , Red

For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes, attaching pedals to shafts, inside transmissions.
Knurled outer jaw surface for positive grip on ring.
For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes.
Also attaches pedals to shafts, inside transmissions, etc.

New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....

...se while providing less wrist and grip fatigue during use..
SAFETY - This Scooter is classified as a Non-Medical Device and is not intended to assist, treat, diagnose, or alleviate any medical condition or disability. Do not make turns at high speeds or on steep inclines, as your scooter may tip over. Always use the parking brake when parking the scooter. The parking brake may require occasional adjustments, this can be accomplished by tightening the nut on the brake cable, or at the brake handle. Always use two hands when operating..
PROPER USE - The scooter is intended for use on hard, flat, dry paved surfaces without loose debris such as sand, leaves, rocks, or gravel. Wet, slick, bumps, uneven or rough surfaces may impair traction and contribute to possible accidents Do not ride your scooter in mud, grass, gravel, sand, ice, or water, slopes/inclines greater than 5 degrees. Minimum age requirement 16 years old..

Throttle Cable Length: 46.45"(1180mm), the metal part without the casing is about 2.36"(60mm).
only compatible with dual drum brake systems, not compatible with front disc brake systems.
with parking brake button and connection wires.

Frame/fork: folding steel frame with steel suspension fork.
Wheels/tires: aluminum rims with 24 inch tires.
Drivetrain: six speed with a Shimano rd-ty21-a-ss rear derailleur.
Brakes/Cockpit: front V-Brake with parking brake, easy adjust steel stem, large comfort saddle, Shimano sl-tx30-6r thumb shifter.
Includes: Front fender, rear basket, parking brake, bell, chainguard.

Ideal solution - this loaded brake backing plate comes preassembled with the components required to make a complete parking brake repair.
Time saver - eliminates frustrating, unpredictable work required to replace individual corroded components.
Direct replacement - engineered and manufactured to match the fit and function of the original parts.
Application specific - designed for specified vehicles and wheel positions.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Condition:100% Brand New AFTERMARKET PARTS,CNC-machined from 6061-T6 billet aluminium,Anodized finishing.
ATV Parking Brake Cover Plate Kit covers the mount hole on your caliper left over after removing the emergency brake cable and bracket..
Seal your rear caliper from the extreme conditions of off-roading with a billet Parking Brake Cover Plate Kit..
Designed to provide a quick and easy install when removing the stock parking brake assembly.
Universal design fits most for sport ATVs,Includes Seal O-ring and mounting bolts.

Frame/fork: folding steel frame with steel suspension fork.
Wheels/tires: aluminum rim with 20 x 1.75 inch white wall Kenda tires.
Drivetrain: single speed, one piece crank.
Brakes/Cockpit: front v-brake with parking brake, easy adjust steel stem, large comfort saddle.
Includes: Front fender, rear basket, parking brake, bell, chainguard. Folded dimensions of 35"L x 30"W x 31"D.

Direct replacement - this parking brake pedal release handle is designed to match the fit and function of the original handle on specified vehicles.
Restores functionality - this handle is made to fully restore appearance and functionality after the original part fails.
Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Simple one-step fold - Folds in seconds!.
Featuring Nitro Piston technology - Nitrogen powered open.
Full-feature scorecard console with integrated beverage holder, mobile device holder and golf Ball storage.
Extra large accessory bag under scorecard console for storage.