ReviewsPart Epoxy Spray Paint

Adhesive Guru Silicone Mold Release Aerosol Spray (13.5 fl oz) Lubricant Agent for Epoxy Resin Molds (1 Pack)

  • Perfect For Many Projects – Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material. Silicone mold release spray for epoxy resin molds used for silicone molds, candle molds, wax and urethanes. This spray is easy to use, features high quality ingredients & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our Adhesive Guru mold release for epoxy resin ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Special Formula - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The special formula ensures that your projects come out exactly the way you want!.
  • Extend the Life Of Molds - Use this mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Non-stick silicone lubricant prevents sticking, is colorless and odorless. Using our Adhesive Guru silicone spray mold release when creating projects can help prolong the life of your molds by preventing sticking..
  • Easy to Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simpl....
Check Stock

DILAKS 750W Paint Sprayer, HVLP Home Sprayer Gun with 1000ml Container, with 6 Nozzle Size for Different Painting Projects, Easy Spraying and Cleaning, Perfect for Indoor, Outdoor and Furniture

  • 3 spray patterns ( horizontal, vertical and circular )to speed up your painting projects. Adjust the air cap to change the spray pattern to meet different painting task.
  • 6 nozzle sizes (1.0mm/1.5mm/1.8mm/2.2mm/2.6mm/3.0mm) helps you easily handle with all kinds of paints. 1.0-2.2mm nozzle are great for thin paints like sealers and varnish. 2.6-3.0mm nozzle is great for spraying latex paint,chalk type paint and milk type paint.Please note that the blue nozzle(2.6mm) was installed in the gun.
  • Comes with 5-piece paint strainer. It can be used for eliminate dirt, dust, particulates, lumps or any debris that can affect your paint job by clogging your spray gun. Perfect for all painting projects, as they strain out particles down to 190 microns. and work for all types of solvent or water-based paints, stains, varnishes, epoxy, latex and other liquids. So before use this paint sprayer, please make sure to dilute the paint according to the instruction.
  • Detachable design, each spray parts can take apart with hands. To avoid paint clogging, make sure to clean every parts after each use.
  • Regulate the paint output by adjusting the flow control knob on the sprayer to get different paint output.
Check Stock

SprayMax 3680034 Matte Black 2K Epoxy Primer Aerosol 13.5 oz (2 Pack)

  • DURABLE EPOXY PRIMER: Apply this automotive aerosol gray primer on car body panels, aluminium, steel, or fiberglass to create a durable finish, and to effectively prevent rust. Setting the stage the professional way for your new paint job, and extending the lifetime of your new paint. Spray like a pro without the expensive HVLP setup..
  • BEST USE: The Eastwood 2k epoxy gray primer features a 2 component formula containing the premium Eastwood gray epoxy paint, and the 2k activator formula. Impressive 3 year shelf life, along with 48 hour pot life once activated. The innovative nozzle isn't like your regular rattle can, this specially engineered nozzle sprays in a wide fan pattern. Made in Germany using Eastwood specialist proprietary technology..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye, sk....
Check Stock

To Paint or Not to Paint

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-403794 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

Epoxy Putty, 120g 2 Part Fast Repair Epoxy Glue, Metal, Plastic, Wood, Glass, Ceramic Crack Filler, Heat Resistant and Waterproof (Grey)

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service. If you are not satisfied with waterproof putty, feel free to contact us via Amazon and we will provide you with a free replacement and a full refund..
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Quart, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-487750 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-492063 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock