ReviewsParting Grooving Bars

THINBIT 3 Pack SGI012D2FR 0.012\ Width 0.036\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .036" deep. Can also be used for parting stock up to .072"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI062D2FR 0.062\ Width 0.100\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI029D5E 0.029\ Width 0.087\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel and Stainless Steel Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .087" deep. Can also be used for parting stock up to .174"..
  • TiAlN Coated DURA-MAX 5000 carbide grooving insert for steel, titanium, nickel and stainless steel without interrupted cuts..
Check Stock

OSCARBIDE 3/8\x1/2\ Indexable Lathe Parting Grooving Holder with 10 Pieces GTN-2(QC1402) Carbide Inserts Heavy Duty Nickel Plated QA06R-20J Right -Hand Cut Off Tool

  • Size:Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Sandvik Coromant, QD-NG-0300-0002-CM 1125, CoroCut QD Insert for Parting, Carbide, Neutral Cut, 1125 Grade, (Ti,Cr,Al) N+(Ti,Al) N (Pack of 10)

  • INSET TYPE: Secure parting off and deep grooving insert.
  • Rail insert & holder design for stable and preices insert positioning.
  • CM = Cut-off Medium, parting geometry, high cutting edge line securtiy with premium chip breaking design.
  • START CUTTING VALUES: Steel - fnx 0.004 in/r(0.003-0.008), vc 580 sfm(510-710), fnz 0 in(0-0).
  • Stainless Steel - fnx 0.004 in/r(0.003-0.008), vc 465 sfm(410-580), fnz 0 in(0-0).
Check Stock

THINBIT 3 Pack LGT062D5RFR 0.062\ Width 0.155\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .155" deep. Can be used for parting stock up to .310". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT020D2RE 0.020\ Width 0.060\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .060" deep. Can be used for parting stock up to .120". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Sandvik Coromant, N123F1-0318-RO 1125, CoroCut 1-2 Insert for Profiling, Carbide, Neutral Cut, 1125 Grade, (Ti,Al) N (Pack of 10)

  • Benefits of this product family : Secure and efficient machining.
  • Plug and play adaptors make it easy to connect the coolant.
Check Stock