ReviewsPass Filter

MTX Audio JH7005 Jackhammer Series 700W 5-Channel Class-AB + D Car Audio Amplifier

4 Ohm: 60 watts x 4 ch. + 275 watts x 1 ch. | 2 Ohm: 90 watts x 4 ch. + 450 watts x 1 ch. | 4 Ohm Bridged: 180 watts x 2 ch..
Frequency Response: 20Hz - 20,000Hz (Main Channels) + 20Hz - 250Hz (Subwoofer Channel) | High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct.
Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz.

Check Stock

WKDUN C8 365nm 5W UV Flashlight Torch in Leak Detection, Forensics, Law Enforcement, Coating Inspection, Fugitive Glue, Curing, Special Effects, Urine Displays, Exhibits and More Long Version

365nm long wave UV LED with ZWB2 black filter to absorb the visible light while allowing a high percentage of the UV to pass through..
Use C8 365nm UV flashlight in leak detection, forensics, law enforcement, coating inspection, fugitive glue, UV Curing, special effects, urine detection, displays, exhibits and more..
IPX6 Waterproof: Full metal made body garuantees the tactical torch rust resistant & shock resistant, suitable for all kinds of weather, whether fog or rain..
Long Version C8 flashlight can work by 1pcs or 2 pcs 18650 batteries. batteries are not included in the listing. You need prepare the batteries by yourself.
All flashlight come with ZWB2 black filter.ZWB2 Filter is a kind of black glass that has a good pass through of the 365nm waveband ultraviolet rays, but other wavebands cannot pass through. Its function is to filter out stray light and ensure that the light coming out is pure 365nm ultraviolet light so that the light color is purer and the fluorescence effect is better..

Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.

Check Stock

ALPINE KTA-450 400w 4-Channel Amplifier Small Footprint Saddlebag Motorcycle Amp

Rms power bridged 2 x 160 W @ 4 Ohms: 14.4V.
Class D (digital) amplifier.Channels: 4/3/2 channel (stereo).Temperature monitoring.Automatic switch-on Function.Crossover: adjustable low pass filter (LPF)/ high pass filter (Hpf).

Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..

Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Check Stock

MTX Audio JH3004 Jackhammer Series 300W 4-Channel Class-AB Car Audio Amplifier

4 Ohm: 60 watts x 4 ch. | 2 Ohm: 90 watts x 4 ch. | 4 Ohm Bridged: 180 watts x 2 ch..
High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct.
Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct.

Check Stock

Soundstream ST1.1000D Stealth Series 1000W Class D Monoblock 1 Channel Amplifier

Picasso Nano Series Monoblock Class D Car Amplifier.
RMS Power Rating: 4 ohms: 350 watts x 1 chan. / 2 ohms: 600 watts x 1 chan. / 1 ohm: 1000 watt x 1 chan..
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave & Variable high-pass filter: 10 - 50 Hz, 12 dB/octave.
Pulse Width Modulated MOSFET power supply.

Check Stock

Sebo Filter Set for E Series

Sebo 8322AM Filter Set is a Replacement for the E Series Canisters.
Includes Motor Protection Filter and Micro Exhaust Filter.
Micro Exhaust Filter Removes 99.9% of Particles that are 0.3 Microns or Less.
Motor Protection Filter Prevents Debris from Getting into the Motor by Catching Debris that May Pass Through a Ripped Bag.

Check Stock

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Amp+Bass Knob

Package Includes: (1) ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1) ALPINE RUX-KNOB.2 Remote Control Bass Knob For....
Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible. Specifications: CTA-2006 Power Rating: 100W RMS x 4 + 500W x 1 (2.
Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty aluminum alloy heat-sink. Input sensitivity: High level: .5 - 10V Low....
Variable high-pass filter: 50 - 400Hz, -24dB/octave. Variable low-pass filter: 50 - 400Hz, -24dB/octave. Subsonic filter: 8 - 40Hz. Variable Bass....

Check Stock

YWBL-WH Bandpass SMA Filter BPF Anti-interference 2.45G 433M 1575M 900M 1090M New Denoise SMA Interface

【Easy to Debug】A bandpass filter is a device that allows a specific frequency band to block other frequencies at the same time. It is easy to debug, it has good selectivity and stability.
【Professional Design】The filter has the characteristics of low insertion loss, high stopband rejection and high image attenuation, high power tolerance, low cost and miniaturization.
【High Quality】The band-pass filter is made of high‑quality materials, which has high precision, stable performance, high sensitivity, durable in use.
【Features】The 433mhz band pass filter is processed by professional manufacturing, it has precise design, high reliability, stable and reliable working performance.
【After Sales】If you have any questions about your order, please feel free to contact us directly and we will get back to you within 24 hours.

Check Stock