ReviewsPassive Module

Onyehn IR Pyroelectric Infrared PIR Motion Sensor Detector Modules DC 2.7 to 12V(Pack of 12pcs)

  • AM312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment..
  • Low power consumption, small size, easy to install..
  • Internal use of digital signal processing, pit interference strong..
  • Repeatable trigger mode: that is, after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time)..
  • Sensing range: ≤100 degree cone angle, 3-5 m.
  • (required depending on the lens) Working temperature: -20 to + 60 ℃.
Check Stock

Comidox 1PCS Infinite Cycle Delay Timing Timer Relay Switch Turn ON/OFF Module 0.5s ~ 1000min Dual Time Adjustable AC 110V 120V 220V 230V

  • The timing relay of the closed cycle module has high design precision. It has a wide adjustable time range from 0.5s to 1000min. You can adjust the....
  • With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time..
  • It can be used for reciprocating stroke control, or repeated power-off of equipment and product aging test..
  • Input (start button): Passive switch input, the green light will be on first after starting, and will stay in red after stopping. It is not necessary....
  • The circuit board can only be installed with 2 screws on the long side. The size of the circuit board is too small to fit 4 screws..
Check Stock

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

  • DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
  • High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

EKWB EK-Vector FTW3 RTX 2080 Ti Backplate Black

  • CNC machined retention backplate made from black anodized aluminum, that fits all EK-Vector FTW3 RTX 2080 Ti water blocks.
  • "Vector series backplates are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to....
  • Backplate covers the whole length of graphics cards PCB.
  • Serves as an aesthetic add-on and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core.
  • "This backplate is guaranteed to be compatible with all EVGA FTW3 RTX 2080 Ti graphics cards. ".
Check Stock

Premium 3 in 1 Out RCA Switch Box, Passive Stereo Signal Source selector, Audio switcher Splitter Box (Black)

  • This compact RCA switcher box allows connection of up to 3 stereo sources input and selects one audio output through the rotary knob(Note: When 1-in 3-out, 3 outputs are not simultaneously).
  • Audio input stereo signal switch, for multiple sources signal select, No signal loss.
  • Specialized audio rotary switch, Golden plated RCA.
  • Durable Solid aluminum case, Solid aluminum knob.
Check Stock

HiLetgo 3pcs AM312 Mini Pyroelectric PIR Human Sensor Module PIR Infrared IR Sensor Body Manual Motion Infrared IR Detector

  • AM312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment..
  • Low power consumption and small size for easy embedded installation..
  • Sensing range: ≤100 degree cone angle, 3-5 meters.
Check Stock

Klipsch RSA-500 500W Multiple Use In-Wall Subwoofer Amplifier (Each)

  • The Klipsch RSA-500 is a single channel amplifier designed to power a passive subwoofer (a subwoofer that has no internal amplifier).
  • Primarily designed for use with the Klipsch RW-5802 and RW-5101-C in wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.
  • This amplifier pumps out 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules).
  • The RSA-500 offers standard input/output connectivity that will support any type of system.
  • Rack ears are included for fast and secure placement into any standard 19-inch rack.
Check Stock

High Frequency Transducer, Mixer Module 0.1‑500MHz Bandwidth Mixing for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock