ReviewsPassive Poe

Mikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

Cudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE

  • 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
  • 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
  • Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
  • Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
  • Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check Stock

BV-Tech 6 Port PoE+ Gigabit Switch (4 PoE+ Gigabit Ports with 2 Gigabit Uplink and Extend Function) – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 Gigabit PoE+ Ports and 2 Ethernet Uplink Ports at 10/100/1000 Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

  • [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them,all products are rigorously certified.
  • [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
  • [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
  • [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
  • [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • ...oviding up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circu....
Check Stock

BV-Tech 24-Port Gigabit PoE+ Managed Switch with 2 Ethernet & 2 SFP Uplinks | High-Performance NDAA Compliant | POE-SW2404G-MG-PLUS

  • 【24 Gigabit PoE+ Ports for Powerful Connectivity】Equipped with 24 PoE+ (802.3af/at) 10/100/1000Mbps RJ45 ports, providing up to 30W per port with a total PoE power budget of 250W for a seamless network experience..
  • 【High-Speed Uplinks & SFP Expansion】Features 2 Gigabit Ethernet Uplink ports and 2 SFP Uplink ports (100/1000 Base-X) for high-speed connections, enhancing overall network performance and flexibility..
  • 【Wide Compatibility with 48V Active PoE】This 48V active PoE switch is designed for compatibility with a broad range of devices, but please note that it is NOT compatible with Ubiquiti devices that require 24V Passive PoE..
  • 【Reliable BV-Tech Premium Series】Trust in the quality and performance of our Made-in-Taiwan, NDAA Compliant PoE Switch for your networking needs..
  • 【100% Satisfaction Guarantee】Our 30-day Money-Back Guarantee and 1-Year Warranty ensure your peace of mind when choosing our premium, Taiwan-made, NDAA Compliant PoE Switch..
Check Stock

Ubiquiti ES-48-750W EdgeSwitch 48-Port PoE Switch, 750W

  • EdgeSwitch 48 Port ES-48-750W Managed PoE+ Gigabit Switch with SFP non-blocking throughput 70 Gbps.
  • The EdgeSwitch delivers robust performance, PoE+ support and intelligent switching for growing networks..
  • The EdgeSwitch features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network..
  • Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps..
  • The EdgeSwitch supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability..
Check Stock

16 Port PoE Switch, 16 PoE+ 100Mbps Ports with 2 Gigabit Uplink Ethernet Ports, 1 Cambo SFP, Unmanaged Plug and Play, Each Port Up to 30W, High Power Total Budget 300W, 803.af/at Compliant, Rack Mount

  • 【PLUG AND PLAY】16 x 10/100Mbps PoE ports and 2 gigabit ethernet uplink ports and 1 SFP port unmanaged PoE switch, easy setup with no software installation or configuration needed. Does not have IP address or web interface..
  • 【HIGH PERFORMANCE】 Compliant with IEEE 802.3af/at Network protocol standard, supports PoE power up to 30W for each PoE port(Total of 300W PoE power budget).Compact & Sturdy Metal Housing design makes it safe to use in various environments.
  • 【STANDARD POE SWITCH】PD Detection, Automatically detect and provide required power for your PoE devices and protect your non-PoE equipment from being damaged. PoE Extension data transmission up to 600ft long distance if needed (Transmission Speed will be reduced to 10Mbps if extend function is operating, must use high quality cable).
  • 【Sturdy Metal Case】Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
  • Note: Do not support passive 24V PoE device E.g. ubiquiti access point.
Check Stock