ReviewsPatio Cleaning Nozzle

Pressure Washer Tips Turbo Nozzle Pressure Washer 3000 PSI Max Rotating Pressure Washer Nozzle with 2PCS 1/4'' Quick Connect for Cleaning Brick, Concrete, and Vinyl Surfaces

  • 【Powerful Strike】Rotating Turbo Nozzle use centrifugal force to produce a strong impact and a spray pattern. The spray adds additional scrubbing ability to the cleaning process. This provides break-through cleaning on heavily soiled or high-traffic areas. Warm Tips: Pls don't worry about some residual water droplets in the turbo nozzle when you receive it because we have tested each one before selling..
  • 【Save Time】These Power Washer Turbo Nozzle help in reducing cleaning time by utilising the rotary action of an 0° stream and a wide angle spray pattern, They are designed to provide a 200% cleaning efficiency over conventional fan jet nozzles. Attention: When you find the nozzle can not work for a long time.1.Pls disassemble the nozzle, ,clean the inside thoroughly. 2.It will also not work normally, If there is no enough water,release the gas after you add water..
  • 【High Quality Materials】The Pressure Washer Nozzle Rotating with an all Brass and stainless steel construction, The precision ceramic orifice and matching seat, along with the high strength forged brass housing, provide a long life accessory. Tip: Around the joint of nozzle and 1/4'' quick connect, pls wrap the teflon tape a few more times. Use a tool wrench to Tighten them..
Check Stock

M MINGLE Pressure Washer Tips Turbo Nozzle, Rotating Pressure Washer Nozzle with 1/4'' Quick Connect for for Cold Water, for Cleaning Brick and Concrete, 2000 PSI, Orifice 2.5

  • Powerful Strik: Max. pressure: 2000 PSI. Pressure washer rotating turbo nozzle use centrifugal force to produce a strong impact and a spray pattern. The turbo jet power washer nozzle spray creates a powerful jet of water, adds additional scrubbing ability to the cleaning process..
  • Widely Application: Power washer rotating nozzle is ideal for cleaning heavily soiled bricks and large amounts of dirty. Such us concrete, block, brick, pavers and most durable outdoor surfaces. Great for rust removal, metal or plastic tank cleaning, boat cleaning, cleaning dirty garage floors. Also for your car, cars rims, house and gutter. Designed for cold water pressure washers..
  • Save Time: Turbo pressure washer nozzle cleans up to 40% faster than standard nozzles. These nozzle turbo help in reducing cleaning time by utilising the rotary action of an 0° stream and a wide angle spray pattern. Attention: When you find the nozzle can not work for a long time. Pls disassemble the nozzle, clean the inside thoroughly..
  • High Quality Turbo Spray Nozzle: The pressure washer nozzle rotating with an aluminum and stainless steel construction, provide a long life accessory. Orifice Size is 2.5. Fits most brands connect to 1/4" fittings of pressure washer wand for an intense clean. Tip....
Check Stock

SC Water Metal Garden Hose Nozzle Anti Leak Heavy Duty- 10 Pattern Anti Rust No Squeeze Sprayer -High Pressure Attachment- for Car Wash Water Plants Include Brass Nozzle +1 Year Manufacturer Warranty

  • ...praying. Helps save the problem of sore hands allowing you to do it remotely with the on/off switch..
  • ???? ????Distinct Watering Patterns: Forget the old design of 6️⃣-8️⃣ patterns, we live in 2️⃣0️⃣ 1️⃣9️⃣. With this unique ????-pattern Nozzle you can do things from watering your plants, to cleaning your garage, or even wash your car if you so choose. You cannot go wrong with having a few extra patterns..
  • ???? 1️⃣ Year Warranty: We are confident that you will ❤️️ our product, which is why it is backed with a ????% warranty. We pride ourselves on having ????% Customer Satisfaction..
Check Stock

AR Blue Clean PW909114K Pressure Washer Nozzle Pack Four Pack

  • The red zero degree nozzle is a high pressure, tight concentrated spray angle perfect for precise cleaning and tough dirt.
  • The green 25 degree nozzle is a medium pressure, delicate spray angle which is the best choice for your average cleaning jobs.
  • The yellow 15 degree nozzle is a medium pressure concentrated spray angle which is the best for small area cleaning with tough dirt and grime.
  • The white 40 degree nozzle is a low pressure, wide spray angled nozzle which is prefect for large area general cleaning.
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

Simpson Cleaning 80149 Universal 16-Inch Pressure Washer Wand for Cold Water Use up to 3600 PSI, Silver

  • Great for residential projects: This 16-inch pressure washer wand/lance extension provides cleaning power for household tasks.
  • perfect to clean your car, driveway, patio, sidewalk, siding, and more.
  • Easy to use: This attachment features an industry standard QC nozzle connection, and an industry standard M22 threaded spray gun connection, providing a universal fit that is easy to hook up to nozzles, surface cleaners, and spray guns.
  • Compatibility: This power washing wand/lance extension works with most pressure washers with ratings up to 3600 PSI.
  • Please note this extension is only for cold water use.
  • Durability and Strength: High-quality Simpson construction ensures great performance for any pressure washing task.
  • Nozzle Connection – Industry standard QC.
  • Spray Gun Connection – industry standard M22.
Check Stock

Sun Joe SPX2000 1740 PSI 1.59 GPM Electric Pressure Washer, 12.5-Amp , Green

  • Questions, Text 563563 to chat directly with a Sun Joe expert.
  • VERSATILE: Ideal for light to medium duty cleaning jobs including auto, deck, concrete, pavers, dock, boat, cabin, porch, patio, windows, siding, driveway and more!.
  • ADJUSTABLE PRESSURE: Adjustable spray wand with twist nozzle easily controls water pressure to handle the task at hand.
  • POWERFUL MOTOR: 12. 5-Amp/1500-watt motor.
  • DETERGENT TANK: On-board 0. 9 L detergent tank for extra cleaning power.
  • TSS (total stop system): automatically shuts off pump when trigger is not engaged to save energy and prolong pump life.
  • PRESSURE: Max rating per CSA test standards. Maximum internal pressure is 1740 psi. Under typical load, working pressure is 1150 psi..
Check Stock

AR Blue Clean PW909300K Trigger Gun Kit. Electric Pressure Washer Trigger Gun Kit. Includes: Trigger Gun, M22 Lance, Foam Cannon, High Pressure Hose, Quick Connect Nozzles

  • ...tachment with ease using the quick connect system..
  • 25 Ounce Foam Cannon: Cut through dirt and grime with ease using the 25-ounce quick connect foam cannon, which includes an adjustable detergent knob and spray angle..
  • Red Nozzle: The red quick connect nozzle has a zero-degree spray pattern, which is ideal for direct cleaning on smaller cleaning surfaces..
  • Yellow Nozzle: The yellow quick connect nozzle has a 15-degree spray pattern, which is great for precise cleaning over small to medium sized surfaces..
  • Green Nozzle: The green quick connect nozzle has a 25-degree spray pattern, which is perfect for delicate cleaning over medium to large surfaces..
  • White Nozzle: The white quick connect nozzle has a 40-degree spray pattern, which is great for general cleaning over large surfaces.
Check Stock

40 Pieces 3D Printer Nozzle Cleaning Kit 28 Pieces 0.15 mm 0.25 mm 0.35 mm 0.4 mm 0.5 mm Nozzle Cleaning Needles with Storage Box 8 Pieces Cleaning Copper Wire Toothbrushes 2 Pieces Tweezers

  • Package contents: you will receive 28 pieces of stainless steel nozzle cleaning needles in 5 sizes, 2 pieces of storage boxes, 8 pieces of cleaning....
  • Various sizes of cleaning needles: these stainless steel nozzle cleaning needles have 5 different sizes, including 12 x 0.4 mm, 10 x 0.35 mm, 2 x 0.5....
  • Compatibility: these 3D printer nozzle cleaning accessories are compatible with most 3D printers nozzles, compatible with MK8, MK10, etc., please....
  • Quality material: these 3D printer nozzle cleaning needles are made of stainless steel, these wire brushes are made of copper wire, durable and....
  • Practical tools: these stainless steel nozzle cleaning needles are good for gentle maintenance of your nozzles and hard-to-reach places, these copper....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

WORX Hydroshot 20V Power Share 320 PSI Portable Power Cleaner -WG620 (Battery & Charger Included)

  • [5X MORE PRESSURE] Than a garden hose with a nozzle, and much more portable. Take the Hydroshot anywhere you need to clean.
  • [EASIER TO USE] Lighter and more compact than a pressure washer, the Hydroshot packs the perfect power to clean everything from bikes and cars to windows and patio furniture.
  • [DRAWS WATER FROM ANYWHERe] Any fresh water source is fuel for the Hydroshot. Drop the 20’ hose in a lake, pool, or bucket. You can hook up to a garden hose at the house or even a 2L bottle on the go.
  • [5-IN-1 NOZZLE] 5 different pressure settings (0°, 15°, 25°, 40°, and watering setting).
  • [DO IT ALL WITH THE SAME BATTERY] Do it all with WORX Power Share, the only cordless tool platform that uses the same battery to power 20V and 40V.
  • [WHAT’S INCLUDED] A 20V 4. 0 Ah battery, 5 hr Charger, 20’ Draw Hose with Quick Connector, 5-in-1 Cleaning Lance, Bottle Connector, Quick-Connect Adapter.
Check Stock