ReviewsPc Case Cooling Fan

ThreeBulls 5 Pack 4-Pin PWM Fan Splitter Cable, Sleeved Braided Adapter Computer PC Fan Power Extension Cable Converter for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable (10.6')

Excellent 4 pin PWM fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case..
Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
Package contents: 5 pack black 10.6 inch fan power supply extension cables, male to female connector plug..

Check Stock

Segotep T1 Full-Tower E-ATX Gaming PC Case, Graphics Card Vertical Mounting w/Tempered Glass Side Panel, USB 3.0 Type-C I/O, Cable Management/Optional 360mm Radiator (No Fan Included)

...he graphics card, or any PCI Express card vertically inside your case. Different from Graphics Card horizontal installation, It’s no need to worry about deformation..
【Spacious Open interior】Gaming computer case supports up to E-ATX motherboard, and up to 360mm water cooling radiator in front or 360mm in rear, with vertical GPU 345mm support which no need to worry about deformation..
【Show Off Your Lights】E-ATX PC case with 0.7mmSPCC transparent tool-free glass side panel allows for a great view of your RGB components and internal hardware..
【Optimal Cooling Performance】Superior airflow with space for up to 7 pc case fans. The detachable fan bracket of the full-tower case can install 120mm or 140mm fans*3, and one 120mm on the top of the case, rear-mounted support optional 120mm fan*3 or 140mm fan*2..
【DUST-PROOF Design】The upper and lower parts are equipped with Pull-out dustproof filters, including the magnetic dust proof net on the front panel, which can effectively prevent dust from entering the gaming pc case and easy to keep clean..

Check Stock

Maxmoral 1-Pack 8 Way PC Fan Hub 3Pin Computer Cooling Fan 2 Level Speed Controller PCB Adapter SATA 1 to 8 Multi Way Splitter

Type: 1 To 8 Way 3Pin Splitter Cooling Fan Hub PCB Adapter, Widely used for PC computer water cooling system..
PC fan hub splitter is powered by computer, enough power supply, stable performance, there are two optional power interface: Large 4Pin IDE Molex and SATA..
Can control up to 8 fans at the same time, centralized arrange fan cables, no longer worry about the insufficient fan interface..
Support manually speed control, the fan can be started at full (HIGH) or Low (LOW) speed with manual gear or shut down..
Small size without taking up space. There is adhesive glue covered on the back of PCB, which can stick the hub on the PC case easily and firmly, not easy to fall off..

Check Stock

Thermalright TL-8015W CPU Fan Computer case Fan Quiet 4pin PWM PC Fan, 15mm Slimline Cooler Fan, 2200RPM Speed, 80mm CPU Cooling Fan(White)

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*15mm, Speed: 2200RPM±10%, Noise ≤23.3dBA Connector: 4pin pwm, wind pressure: 1.25mm H2O,Air Flow: 28.4CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers..

Check Stock

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
Plastic construction fan. Dual Ball Bearing.
DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.

Check Stock

Thermalright TL-B8W CPU Fan Computer Case Fan Quiet 4pin PWM PC Fan, 80mm Silent Cooler Fan, 2200RPM Speed, CPU Cooling Fan(White)

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*25mm, Speed: 2200RPM±10%, Noise ≤24dBA Connector: 4pin pwm, wind pressure: 2.7mm H2O,Air Flow: 34CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers. Easy to install, can be combined with instructions or installation tutorials..

Check Stock

PC Fan Splitter Extension Cable - 1 to 2 PWM Fan Splitter Compatible with 3 & 4 Pin PC Cooling Fans, 10 inch Black Braided Nylon Cable (2 Pack)

Simple Installation - Our PWM splitter connects 2 computer case fans to a single fan header. 10 inch pwm fan extension cable gives you greater flexibility between the motherboard and PC fans.
Durable Construction - Each computer fan splitter has black braided nylon sleeved cables to provide long-lasting performance as well as to prevent dust and wear on the case fan splitter wires.
Increased Cooling - Our CPU fan splitter provides better power supply, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs.
3 & 4 Pin Compatible - Each 4 pin fan splitter has a 4-pin female connector on one end, a 4-pin male and a 3-pin male connector on the other, this can be used with 3-pin pc case fans as a 3 pin fan splitter.
Money-back Guarantee - We’re proud of the PC cables we sell. If your fan splitter fails to meet your expectations for any reason, we will go the extra mile to make things right.

Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
Fans will be operated at the fixed SATA voltage of 12V.
2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.

Check Stock

uphere 140mm Case Fan 3-Pack Computer Case Fan with Advanced Hydraulic Bearing for Silent Operation Standard 140 mm Case Fan 3 Pack with 3 Pin & Molex /(BK143-3)

1 Features standard 140mm mounting holes : 140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency..
2 Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1000RPM at low 25dBA and deliver an air flow of up to 49.8CFM.
3 Anti-vibration Mounting System: The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA.
4 Innovative Design Enabkes Quiet And Efficient: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation..
5 New concept of fan design. Unique appearance 2018 newest release 140mm case fan.

Check Stock

Zmbroll PC Computer Case Cooling Fan Screws Cross Recessed Head Self Tapping Screw M5x10 Black and Silver Case Fan Mount Screws Long Short Screws Kit

Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation.
Computer case fan screws size:5*10KB/M5*10mm, fit for most computer case fan,the long Water cooling screw :6-32*30 ,3cm long.
Made of high- quality metal,packaged in a handy box,good choice for a DIY personal computer building.
Package includes 50pcs silver and 50 pcs black computer case Phillips Flat Head Screws and 40pcs black long flat head computer cooling fan screws.
Self-tapping thread design for quick and easy installation of most standard plastic-framed case fans.

Check Stock

140mm Case Fan Quiet High Performance PC Fan 140mm Standard Case Fan 3pin 4pin Molex Connector 12V DC Computer PC CPU Case Fan 1000RPM 2-Pack

❤ STANDARD CASE FAN:140x140x25mm 140mm fan quiet silent 12v dc 0.38A cooling fan for the replacement of standard computer case fan ,gaming PC fan ,CPU cooler fan or other electronics equipment heat sink radiator.the fan's speed can be adjusted by using a different voltage (5-12V), it can work at a lower voltage to achieve a silent effect..
❤ 3-PIN CONNECTOR: 140mm 3 Pin connector fan for easy installation.4pin motherboard power port to suitable for more than 2 kinds of 140mm fan using..
❤ ANTI-VIBRATION SCREWS: Besides 4pcs normal screws there has extra 4pcs anti-vibration silicon screws packed together to reduce noise between fan and PC case..
❤ PACKAGE INCLUDED:140mm long life sleeve bearing case fan x 2 ,Silicone screws x 8, fan screws x 8..
❤ 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose..

Check Stock