ReviewsPcb Drill Spindle

DAEDALUS CNC Router Machine 3018 Max, 3 Axis, 200w Spindle, All Aluminum Frame

  • ★Pre-assembled module, all aluminum frame and spindle holder with the lead screws, guide rods..
  • ★Designed to use GRBL1.1 firmware, support PC control and offline control..
  • ★Offline controller, control without computer, a great convenience and a space saver..
  • ★Max travel of X/Y/Z Axis, 300 x 180 x 45 mm. Spindle, 200w, 12000RPM. T8 lead screw, 2mm pitch..
  • ★Good at cutting strong wood(oak, pine, poplar), acrylic,plastic,PCB and aluminum..
Check Stock

uxcell A14082700ux0306 0.9mm Tip Spiral Flute Tungsten Carbide Micro PCB Drill Bits

  • Package Content : 10 x PCB Drill Bits1 x Plastic Case.
Check Stock

PROXXON Bench Drill Press TBM 115, 38128 , Green

  • Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
  • High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
  • 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
  • Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
  • Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4mm / 0.157".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

95 Pieces Hand Drill Bits Set, Black Pin Vise Hand Drill, 74 Pieces Micro Twist Drill Bits and 20 Pieces PCB Mini Drill Bits for Resin Polymer Clay Craft DIY Jewelry (0.1-1mm, Random Color Bits)

  • What You Receive: you will receive 1 piece of black pin vise hand drill, 74 pieces of micro twist drill bits and 20 pieces of PCB mini drill bits, sufficient quantity and a nice combination to satisfy your daily use and replacement.
  • Size Information: the micro twists have different sizes, 54 pieces for 0.3-2 mm, 3 pieces for each size.
  • 20 pieces for 0.3-1 mm, each size has 2 pieces, and mini PCB drills have 10 different sizes, which are approx. 0.1-1 mm, assorted sizes for you to choose, please confirm the size you need before purchase.
  • Long Serving Time: the micro drill bits set is mainly made of quality aluminum alloy, solid and sturdy for long lasting use, compact and hard wearing, and the PCB mini drills adopt reliable tungsten carbide, and the micro twist drills are made of alloy steel, hardly rusting or deforming, can be applied repeatedly, serving you for a long time.
  • Wide Range of Applications: the pin vise hand drill set can be applied for electronic assembling, tooling, model making, winding, home decorating and so on, making your daily work more convenient.
Check Stock

Stalwart 25 piece 4.8V Cordless Screwdriver with LED

  • ELECTRONIC SCREWDRIVER SET – This automatic screwdriver comes with 24 various screwdriver and drill bits, a convenient carrying case, and a charging cord, so you can be sure your mini drill is always charged and ready to go..
  • FORWARD AND REVERSE SWITCH – The electric screwdriver is equipped with a forward and reverse switch, great for drilling screws into walls and taking them out. With the comfortable soft grip handle, using the power screwdriver is a breeze..
  • AUTOMATIC SPINDLE LOCK – This electrical screwdriver features an automatic spindle lock that safely locks the drill bit in place, has a no-load speed of 180rpm, and comes with a LED work light on the head that makes it easier to see..
  • INCLUDED CARRYING CASE – The electrical screwdriver set comes in a convenient carrying case to keep all your tool bits protected and stored away in between uses. This case also makes it easy to take your driver with you on the go..
  • PRODUCT DETAILS – Materials: Plastic and Metal. Specifications: 4.8V. 25-Piece-Set of Screwdriver and Drill Bits with Included Carrying Case. Color: Red..
Check Stock

uxcell PCB Drill Bits 3.5mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 3.5mm / 0.138".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

Yakamoz 0.3mm - 4mm Micro Aluminum Portable Handheld Drill DIY PCB Mini Electric Hand Drill with 5A Power Supply & 10pcs Micro Drill Bits

  • Electric portable DIY PCB handheld drill, durable and reliable..
  • Low volume, light weight, easily carry, comfort grip handle..
  • 0.3mm - 4mm Quick change chuck makes drilling work more convenience.
  • Ideal handheld Drill tool for PCB drilling, wood, plastic, paper, sheet metal, acrylic, Aluminum, etc. (Please Note: It is NOT suitable for heavy metal or high hardness material.).
  • USA Standard Plug DC12V 5A Power Supply & 10pcs Micro Drill Bits Set Included.
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

uxcell PCB Drill Bits 4.45mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4.45mm / 0.175".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock