ReviewsPcb Holding

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

  • 【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
  • 【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
  • 【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

  • 1.This Kit is super easy to build and very rewarding.
  • 2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
  • 3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....
Check Stock

Hakkin 32 Pcs Pin Vise Hand Drill for Jewelry Making, Mini Manual Drill Kit - 0.8-3.0mm HSS Micro Twist Drill, Pin Vise, Carving Clamp and PCB Drills, Rotary Hand Press Drill for Resin, Wood, Plastic

  • ...Hakkin jewelry drill bit set has an indispensable tool, that is mini bench clamp, its body is made of aluminum alloy, compact and handy, hold the item in position and prevent fingers from being hurt. The small drill press clamp supports 0 - 2.2 inch (0-57 mm), supports round, square and irregular objects, ideal for holding small parts, Watch repairing, Sculpture, Craft, Jewelry and DIY Carving..
  • 【Many Sizes Bits】The jewelry drill is Includes 30 pieces of precision drill bits in 17 most used sizes to satisfy all you demand. Including 20 pcs 0.8-3mm HSS twist drill bits and 10 pcs 0.3-1.2mm tungsten carbide PCB Drills. These bits can be used not only in pin vise, but also in electric drill..
  • 【Wide Application】The hand drill has many different uses, the most common use is for precision drilling, which are suitable for electronic assembling, tooling, model making, winding, home decorating and so on..
Check Stock

Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX

  • Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
  • Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
  • Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
  • Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
  • Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

AmScope - Adjustable Circuit Board Holder and Clamping Kit PCB Holder Frame - Single Pack - 1 Piece

  • Adjustable printed circuit board holder (PCB) holds objects in place for soldering, repair or inspection functions.
  • Wide base with rubber feet creates a solid and safe work platform.
  • Spring-loaded clamp holds objects up to 7 ¾” wide (198 mm) securely in place.
Check Stock