ReviewsPcb Machine

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

...e to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
Note: you should pay attention to use them correctly for ensuring safety and extending service life.
Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
Just use your imagination to DIY a special light strip.
Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shape....

Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..

Check Stock

Articulated Sensor with Linear Position Sensor KPM12-50mm

【Good Quality】The cover shell of KPM12J rod sensor is aluminum, rod is stainles steel, PCB board with machine linear engraving. High precision linearity and repeatability..
【Potentiometer Principle】 This sensor adopts potentiometer principle, output signal is 0-100% of input voltage while changes with displacement..
【Plug & Use】The sensor is with Hessman plug, easy and convenient while using. This sensor can be fixed on machines..
【Wide application】This displacement sensor is widely and common used in injection machine, wood machines, hydraulic machinery..
【Safety】This product is covered with aluminum, rust resistance, long service life. High protection class IP67, good protected, it is workable when powered. Safe to use..

Check Stock

The Warhol Incident (Alexis Parker Book 2)

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

Check Stock

Articulated Sensor with Linear Position Sensor KPM12J-75mm

【Good Quality】The cover shell of KPM12 rod sensor is aluminum, rod is stainles steel, PCB board with machine linear engraving. High precision linearity and repeatability..
【Potentiometer Principle】 This sensor adopts potentiometer principle, output signal is 0-100% of input voltage while changes with displacement..
【Plug & Use】The sensor is with Hessman plug, easy and convenient while using. This sensor can be fixed on machines..
【Wide application】This displacement sensor is widely and common used in injection machine, wood machines, hydraulic machinery..
【Safety】This product is covered with aluminum, rust resistance, long service life. High protection class IP67, good protected, it is workable when powered. Safe to use..

Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

This is Gateron PCB Mount Screw In Crystal Stabilizer，.
Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
If your keyboard is 96 or 104 108 layout,need to buy 2 set.
This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..

Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
Also you can use other strip tools to connect more....
【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....

Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

Package Included: 1x plate.There is no screws and copper stand included..
Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
This plate is anodized brush finished.It can only use with plate mounted stabilizers.
If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..

Check Stock

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

1.This Kit is super easy to build and very rewarding.
2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.

Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....

Check Stock

GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....

Check Stock