ReviewsPcb Mount Fuse

Electronics-Salon 5 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC / 208mA, No load 28.8VAC..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min. No-load current less than 20mA, no-load loss less than 0.5 watt. Insulation grade: grade B. Temperature rise: less than 22C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

Painless Performance 70114 Cirkit Boss Heavy-Duty Auxiliary Fuses Block, 3 Ignition-Hot Circuits

  • Safe way to add electrical accessories to any vehicle.
  • This kit allows for the addition of 3 fused circuits to your already existing factory fuse block.
  • Simply mount the fuse block and relay, route the large 10-gauge wire to the battery, route the ignition wire and then route the 3 accessory circuits to the accessories needing power.
  • Main power wire is 8 feet long from fuse block.
  • Each accessory circuit has 8 feet of wire length from fuse block..
  • Provides three ignition hot circuits with a maximum total amperage handling of 70 Amps.
  • Includes: 70-amp SPST relay, Relay base/fuse block with harness, Crimp-on terminals and mounting hardware.
Check Stock

WZRELB 3000Watt Pure Sine Wave Inverter 48V DC to 120V AC with 2 AC Outlets + AC Connect Terminal Block, 2 Sets of Battery Cables for RV, Solar Syste, Camping

  • 3000W continuous 6000W peak true pure sine wave solar power inverter, as good as grid power, power backup for home power supply..
  • Transfer 48VDC to 120VAC, 60Hz frequency, dual US outlets. Intelligent temperature control cooling fan. Earth connection for both PCB board and output. Digital LED display..
  • High quality true copper inductance, filter the wave form, ensure the true pure sine wave AC output, safeguard your equipment. All big imported mosfets with strong driving capacity..
  • The PCB thickness is 2.00mm, allow the stronger current floating on the circuit, increase the load capacity. High frequency transformer to transfer DC to AC , ensure the stable and full AC output.
  • Free standard battery cables and spare fuse for replacement. CE EMC approved.
Check Stock

1769-OA16 Compact Ac I/o Output Module in Stock New in Box 1 Year Warranty

  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • Matching PCB Thickness 1.6mm to 2.0mm (recommended 2.0mm)..
Check Stock

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

  • DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
  • The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).
Check Stock

ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers DUROCK V1 Smokey 60/87 Keyboard Set

  • 1. DUROCK PCB Mount Stabilizers are designed for MX-compatible PCBs..
  • 2. Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • 3. The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • 4. Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • 5. Pre-clipped Insert method, no need to clip the feet. Fit for 60 Keyboard Set,87 Keyboard Set and 104 Keyboard Set. ( Both 6.25u and 7u Wire....
Check Stock

NOYITO USB to RS232 TTL PL2303HX Auto Converter Module Converter Adapter Pack of 2

  • Pins are clearly labeled and 500mA self recovery fuse for protection..
  • Two data transmission indicators can monitor data transfer status in real time..
  • Reserve 3.3V and 5V pin interface,easy for different voltage system that need power..
  • The entire board is coated by high quality transparent heat-shrinkable sleeve, making the PCB contained in insulation..
  • Support Windows 10 / 7 / Vista (32 & 64 bit) OS.
Check Stock

Homyl Transparent Gold Plated PCB Screw-in Stabilizers 2U 6.25U Keycap Stabilizers for MX Mechanical Keyboard Cherry 1 Set Replacement - Pink 1 6.25u 7 2U

  • * Pre-clipped Insert method, no need to clip the feet. Fit for 104/108 Keyboard Set. ( 1pc 6.25u 7pcs 2U Wire included ) / Fit for 61 Keyboard Set and 87 Keyboard Set. ( 1pc 6.25u and 4pcs 2U ).
  • * PCB Screw-in Mount Stabilizers are designed for MX-compatible PCBs..
  • * Polymer Nylon outer Casing :Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • * The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • * Transparent housings and the Golden Wires set gives your board a clear and golden edge..
Check Stock

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

  • The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
  • 5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
  • 40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
  • The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..
Check Stock

DUROCK V2 PCB Mount Screw in Stabilizers, Translucent Smokey Keyboard Stabilizers with 2u 6.25u 7u Wires, Keycap Stabilizers Mechanical Keyboard Stabilizers (V2 Smokey 60/87 Kit)

  • DUROCK V2 Stabilizers are PCB mount screw-in Stabs that feature a patent design and precision upgrade models to avoid wire drop out..
  • The V2 Stabs Stem / Sliders are pre-clipped design, do not require any clipping for fast & easy set up..
  • Well selected Premium Polymer Nylon housings, all the Stainless Steel Wires and hardware are sourced from Korea and with real gold coating..
  • Translucent Smokey V2 housings and the gold-plated Wires set gives your board an elegant and golden edge..
  • DUROCK Stabilizers V2 Compatible with PCBs that use "screw-in" or "PCB Mount" stabilizers. ( Washers, both 6.25u and 7u spacebar Wire included ).
Check Stock