ReviewsPcb Terminal Block Connector

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..

Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
Package include: 40pcs x 2 Pin Screw Terminal Block Connector.
20pcs x 3 Pin Screw Terminal Block Connector.
1pcs x phillips screwdriver. All packed in a plastic container for easy use..

Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
Package include: 60pcs x 2 Pin Screw Terminal Block Connector.
10pcs x 3 Pin Screw Terminal Block Connector.
1pcs x phillips screwdriver. All packed in a plastic container for easy use..

DIN Rail Mount Screw Terminal Block Breakout Board for Arduino MKR. With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
PCB mount Terminal Block: pitch 5.0mm/0.197.

Standard DB62HD Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
FR-4 fiber glass PCB, dual copper layers..

Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
High quality glass fiber FR-4 PCB, top and bottom dual copper layers..

[Wire Block Clamp Terminal]: Product material: ABS.
Stripping length: about 11~12 mm/0.4~0.5 inches.
[Easy to use] As a color button wire connector, this terminal is easy to use. The 3-in-6-out quick-connect terminal is made of high-quality materials and has strong practicability..
[Safe and reliable] The product is easy to operate and insert, safe and reliable. The terminal block has high performance according to strict rules..
[Impact resistance] The color button line connector is made of ABS material, which is impact resistant, scratch resistant and environmentally friendly..
[Simple operation] The wire connector terminal is easy to insert, safe and reliable, stable in performance, compact in appearance, light and portable, does not take up space, and can be placed anywhere..

The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.

WIRE TERMINAL BLOCK CONNECTOR - No need to drill holes into the walls or waste time using fishing wire to go through the wall. Use our Super Flat Speaker Wire Terminal Block Connector to get a clean speaker setup. Blends in with the wall for a hidden and invisible speaker wire experience. Can also be used with paintable speaker wire to blend in with the wall color..
MAX 12 - 23 GAUGE WIRE CONNECTOR - Compatible with 12, 14, 16, 18, 20, 23 awg speaker wire for acoustic surround sound for your audio sound system. Flat low voltage wire can be used as electrical wire with a max voltage of 35V..
WORKS WITH ANY SPEAKER â€“ Transform your speaker connection like never before by being able to hide the wire or have a more professional look without needing to drill or open any walls..
EASY INSTALLATION GUIDE - 1) Cut edges of flat speaker wire. 2) Remove covering on both sides of copper wire 3) Insert flat wire into connector opening with adhesive side facing down. 4) Connect speaker cables to the wire terminal block connector to test the connection. 5) Attach flat wire to the edge of the wall. 6) Use primer and paint to paint over flat wire..
WIDE APPLICATION - Great application and use cases such as flat speaker wire, flat wire LED, flat voltage wire, hidde....

Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Mega module.

Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
FR-4 fiber glass PCB, dual copper layers..
High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....