ReviewsPcb Terminals

Siemens 3TX7131-4CF13 Basic Plug In Enclosed Power Relay, DPST-NO Contacts, 30A Contact Rating, 120VAC Coil Voltage

Applications Power supplies, heating & ventilation, control equipment.
2 pole 30 A, 2 CO or 2 NO contacts, High switching capacity up 30 A / 400 VAC,PCB- or quick connect terminals or chassis mount.
DC- or AC coil,4 kV / 8 mm coil-contact,Insulation to VDE 0631 and VDE 0700.

Wide Compatibility&Easy to Use. GK61X custom kit is equipped with hot swappable terminals, with which you could install the switches directly without soldering. It’s compatible with Cherry MX RGB switches, Kailh switches and Gateron RGB switches. You can easily build up your own mechanical keyboard with this kit.
16.8 Million RGB Backlight. RGB is such a cool element while playing games. GK61X fully know your needs and thus this model is equipped with RGB SMD light. More than 16.8 million lights are available. It’s more than a keyboard but also a fun toy.
Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you will be able to program the backlight and macro settings. Built-in flash memory can save the setting at offline mode, never afraid of losing it.
Professional 60% Keyboard. GK61X is 60% layout PCB, widely compatible with most of 60% keyboard case, you could change the case as you wish. The chipset is 32 Bit MCU + 8M Flash on-board memory, and 3 pieces independent 256*256*256 RGB color management chip.
All-in-One Kit. GK61X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable. More than that, you even got the mus....

370-440 v, 7.5 uf, 50/60Hz, vegetable oil filled Dual Run capacitor, no PCBs.
Round Dual Run Capacitor Dimensions: 2.08 inch diameter, 5.99 inch total height.
Housed in a rugged phenolic resin case. PCB free.
Designed specifically for use with OEM single phase motor and gear motor applications. No hassle 5 Year Warranty..

Cat6A ethernet connector is designed for fast and easy installation without crimping tools..
Fully backwards compatible with Cat 5e or Cat 6.
Cat6A Shielded connector supports 23 to 26 AWG solid or stranded Shielded wire with an outside diameter between 6.0 and 7.5mm, support 10Gb Ethernet..
Zinc alloy housing provides superior shielding and mitigates alien crosstalk.
Rugged metal alternative to RJ45 modular plugs..
This product is made of plastic, all-copper gold-plated terminals, PCB board, and double-clamp fixed cable behind, which can be reused..
IDC modules can be wired for T568A or T568B wiring..

¼" Quick Disconnect Terminals (Standard).
50 / 60 Hz Operating Frequency , -40 to +70°C Operating Temperature.
Replaces / Supersedes: Old GE Industrial Capacitors C3455 C3455R C4455 C4455R Lennox 89M80 100335-12 CPT02117 CPT-2117 CPT2117 CPT02380 CPT2380....

【Parameters】- Product Name: 26 Pin Connector Flat Ribbon Cable.
【High Quality】- 26 Pin ribbon cable is made of high-grade copper wire material for safe and durable to use..
【 Feature】- The conductor ribbon cable separate easily for clean terminations with standard wire connectors jacks and pins..
【Durability】- Flat ribbon cable securely connected to the pins, quick circuit experiment. In the terminals have not damaged it can be reused..
【Wide Application】- The ribbon wire is suitable for internal wiring in office equipment, audio and video machines,Easily and directly inserted into PCB..

¼" Quick Disconnect Terminals (Standard).
50 / 60 Hz Operating Frequency , -40 to +70°C Operating Temperature.
Replaces / Supersedes: Obsolete GE / GENTEQ C305 C305L SUPCO CR5X370 325P505H37A15A4ZM9 CPT00072 CPT0072 CPT-0072 CPT1864 CPT-1864 CPT0186427L570....

Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.

Package include: 20cm (7.9inch) / 40pin Female to Female jumper wires / 40pin Male to Female jumper wires / 40pin Male to Male jumper wires (Total 120pcs).
Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance..
Cable length: 20cm (7.9 inch) / Cable material: 12-core pure copper wire.
Cable features: Separable multicolored (10 colors) softness ribbon cables.
For DIY experiment / Electronic projects / Breadboard / PC motherboard / PCB project.

Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
Replacement microswitch PCB for Sanwa JLF series Joysticks.
Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
Package include One pcs Original Sanwa TP-MA PCB with Microswitch.

10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action..
High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures..
Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes..
Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads..
PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant..