ReviewsPci Fpga Development Board

PCIe 1 to 4 Riser Card, Pcie Splitter 1 to 4 PCI Riser Card, 4 Risers into 1 PCI Card, PCIe Multiplier Risers 1X to External 4 PCI-e USB3.0 Adapter for ETH Miner GPU Crypto Bitcoin Ethereum Mining Rig

  • NOTE: The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. (compatible with X4, X8, X16 slot).
  • HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency!.
  • HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher!.
  • COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS: HiveOS, DOS, Linux, Windows XP/7/8/10..
  • PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator..
  • 严正警告贵司：恪守文明，公平竞争，友善经营。否则我方将采取一切必要措施予以还击。.
Check Stock

7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module

  • ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
  • With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
  • ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
  • The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

ELUTENG PCIE 1 to 4 Ports PCI Express 16X Slots Riser Card USB 3.0 PCI-E Adapter Board Multiplier Port GPU Extender Miner Riser Card for BTC Bitcoin Miner Mining

  • 【PCI-E 1 to 4 Riser Card】The bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE: The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals..
  • 【Ultra-Large Aluminum Heatsink】The ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable..
  • 【Plug-in Design】The PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency..
  • 【Strong Stability】The main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is....
Check Stock

FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 VER006C GPU Riser(Blue 6-PCS)

  • 1.Feb Smart VER006C high performance PCI Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 2. Designed 3X high performance solid capacitors,1X voltage transformer and 1X Inductance to make sure voltage and current supply stable. Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • 3. Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity. Equipped 15Pin SATA to Molex 6Pin power cable provide adequate current for miner rigs GPUs..
  • 4. Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • 5. Excellent choice for mining rigs. Buy with 30 days warranty. WARNNING:If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
Check Stock

PCI-E Riser for Bitcoin-Litecoin-ETH Coin, PCIE VER 006C 6 Pin 16x to 1x Powered Riser Adapter Card, 50cm USB 3.0 Extension Cable to MOLEX SATA Power Cable GPU Riser Adapter Ethereum Mining ETH (6PCS)

  • 【Compatibility】 The version of this item is VER 006C riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners..
  • 【Quality】 4 High Quality Solid Capacitors (330 16V not 220/270 16V) for more reliable and safe power delivery，Gold plated contacts for flawless connectivity and a long lifespan..
  • 【Safety】With SATA 15pin Male to MOLEX 6pin power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply.
  • 【Convenience】Fixable board with 4 holes available on PCI-E 16X side to fix PCI-E 16X connector to motherboard for more convenient management for graphics card.
  • 【What You Get And Shipping】6x PCI-E 16X riser board, 6x PCI-E 1X adapter card ,6x 50cm USB 3.0 riser cable, 6x 6-pin MOLEX to 15-pin SATA power cable. SHIPPED FROM THE U.S. Delivery time takes about 2-5 bussiness days.
Check Stock

ASRock Motherboard MINI-ITX ATX DDR4 LGA 1151 (H110M-ITX)

  • Memory: 2x DDR4-2133 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 3.0/2.0 x16 Slot, 2x PCI-Express 3.0/2.0 x1 Slots.
  • Audio: Realtek ALC887 8-Channel High Definition Audio CODEC.
  • LAN: Realtek RTL8111H Gigabit Ethernet Controller.
  • Ports: 6x USB 3.0/2.0 Ports (4 rear, 2 at mid-board), 6x USB 2.0/1.1 Ports (2 rear, 4 at mid-board), 1x PS/2 Keyboard Port, 1x PS/2 Mouse Port, 1x VGA Port, 1x DVI-D Port, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

Supermicro H12SSL-C Motherboard - Socket SP3 AMD EPYC 7002 Max 2TB DDR4

  • Supermicro X10drg-q Server Motherboard - Intel C612 Chipset - Socket Lga 2011-v3 - Proprietary Form Factor - 2 X Processor Support - 512 Gb Ddr4 Sdram Maximum Ram - 2.13 Ghz) Memory Speed Supported - 16 X Memory Slots - Serial Ata/600 Raid Supported Controller - On-board Video Chipset - 2 X Usb 3.0 Port - Aspeed Ast2400 - Gigabit Ethernet - 1 X Pci Express X4 Slots - 2 X Pci Express X8 Slots - 4 X Pci Express X16 Slots - 4 X Usb Ports - S/pdif - Vga - 10 X Sata Interfaces.
Check Stock

AITRIP 5PCS ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino

  • Package: You will get 5 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE Features:.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • The best power and RF characteristics are safe, reliable and scalable for various applications..
  • 5PCS ESP32 Development Board TYPE-C USB CH340C WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP32-DevKitC-32 ESP-WROOM.
Check Stock

KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino

  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
  • The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking..
  • The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu..
  • Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

  • Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
  • Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
  • And the entire solution occupies the smallest printed circuit board area.
  • ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
Check Stock