ReviewsPci Io Card

PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)

PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
Note:If you have any questions,please contact us asap,and we will try our best to help you.

Check Stock

StarTech 1 Port PCI-Express Gigabit Network Server Adapter with Realtek Chip NIC Card - Dual Profile (ST1000SPEX2)

Add a 10/100/1000Mbps Ethernet port to any PC through a PCI Express slot.

Check Stock

BEYIMEI PCI-E 1X to 4 Ports PCI Express 1X Slots Riser Card,USB3.0 Converter Extender Adapter Card,M2 Expansion Card PCIe Port Multiplier Card for Ethereum Mining ETH

⭐This riser card can expand the PCI-E 1X slot on the motherboard into 4 PCI-E 1X slots, thereby solving the problem of insufficient motherboard slots..
⭐The 4PIN and SATA interfaces enhance the power supply capacity, thereby reducing the burden on the motherboard..
⭐This adapter card is a hardware adapter, driver-free, plug and play..
⭐It consists of two parts, one is the main card, which is installed on the motherboard through the PCI-E x1 interface, and the other is the device card, which has 4 PCI-E x1 and is connected through a customized USB 3.0 cable,for transfer between PCI-E and PCI-E..
⭐The 4 expansion 1x slots are all in GEN2 mode, even if they were in gen1 mode before. It is a good choice for old motherboards..

Check Stock

EDUP Gigabit Ethernet PCI Express PCI-E Network Card 10/100/1000Mbps RJ45 LAN Adapter Converter for Desktop PC, Model Number: EDUP-EP-9602

Gigabit PCI network card suitable for any phi-enabled client, server or workstation, The Gigabit Ethernet network adapter card Supports high Performance Dual channel networking. And maximum data transfer speeds of 1000Mbps in each direction. Up to ten times faster than 10/100 Ethernet..
Network adapter card fits any PCI Express x1, x2, x4, x8 or x16 socket. You can add a 10/100/1000Mbps Ethernet port to any PC through a Pie slot. Additional 8cm low-profile bracket provides the option for installation in small size HTPC case. Important Note: only work with PCI-E slot, not for PCI slot..
PCI-E Gigabit Ethernet Network Controller Card Chipset is RTL8111F. Supports IEEE 802. 1p Layer 2 Priority Encoding and IEEE802. 1q VLAN tagging..
Gigabit network card fully compliant with IEEE 802. 3, IEEE 802. 3U, IEEE 802. 3x and IEEE 802. 3ab standards. Supports a broad range of operating systems, including Windows 10/8. 1/7/Vista/XP/2003/2000. (You can download driver From EDUP website.
Network card: If you are not satisfied with this network card, Please feel free to Contact us via email: message or 18033060667@163. We will offer you a full refund or new replacement..

Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

Zerone PCI-E to USB 3.0 2 Port Express Card with 1 USB 3.0 20-pin Connector

USB 3.0 supports transfer rates of up to 5 Gbps..
Compatibility: This PCI-E to USB 3.0 2 port express card works for Windows XP 32/64/Windows 7 32/64/Windows8/Windows8.1/Windows10..
The USB 3.0 provides 5Gbps max data(total) transfer speed for video, audio, photos, or files data transmission..
This is PCI-E to USB 3.0 card, NOT PCI-E bridge card, please do not use it on GPU risers..
If you have any questions about this PCI-E to USB 3.0 2 port express card, please feel free to tell us, we will provide you with follow-up services..

Check Stock

DTECH 2 Port PCI-E Serial Card RS232 PCI Express Adapter COM Port Expansion for Desktop Computer PC Windows 10 8 7 XP Vista Linux Mac with 16C550 UART

2-port PCI express serial card turns a PCI-E expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Mac OS, Linux, etc.
PCI-E 1.0 a specification, Standard 16C550 UART signal.
PCI express combo card bracket with two RS232 serial interface uses WCH382 chip, high speed data communication transfer rate up to 250 Kbps.
Standard-height PCIe card bracket design allows the PCI to serial card to be installed in virtually any desktop computer case (full profile computer chassis).
An ideal serial expansion PCIe card adapter for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, hard drive, radio system, etc (If need driver installation guide , pls contact us directly via the order page.).

Check Stock

DTECH 2 Port PCI Serial Card PCI to COM Port DB9 RS232 Expansion Adapter for Desktop Computer PC Windows 10 8 7 XP Vista with 16C550 UART

2-port PCI serial card turns a PCI expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98,etc.
PCI 2.1 specification, Standard 16C550 UART signal.
PCI card bracket with two RS232 serial interface uses WCH chip, data communication transfer rate up to 115.2 Kbps.
Full-height bracket design allows PCI to serial card to be installed in virtually any desktop computer case (standard profile computer chassis).
An ideal RS232 serial expansion card for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, radio system, etc. (If need driver installation guide , pls contact us directly via the order page.).

Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Check Stock

27.56 Inch EXP GDC Beast HDMI to Mini PCI-E Cable Portable HDMI to Mini PCI-E Cord

APPLICABLE EQUIPMENT：This is a dedicated HDMI to Mini PCI-E cable, which can be used for V8.0 EXP GDC external independent video card base, but hdmi to mini pci-e cable cannot be used on V6.0 or V7.0..
COMPATIBILITY NOTICE：This HDMI to Mini PCI-E cable is EXP GDC Beast HDMI to Mini PCI-E cable, which may not be suitable for all laptop models, so you need to pay special attention before buying..
PURCHASE NOTICE：This HDMI to Mini PCI-E cable is a dedicated cable. The HDMI interface is not a standard HDMI interface. If you connect other HDMI interfaces, the EXP GDC device will be damaged..
EASY TO USE：This HDMI to Mini PCI-E cable is 70 cm/27.56 inches long, compact and exquisite, lightweight and portable. Video card dock ngff conversion cable with portable design and long enough cable make the use of this cable very convenient..
AFTER-SALE GUARANTEE：If you have any questions about the EXP GDC beast external HDMI to PCI-E graphics card separate interface cord adapter, please feel free to contact us before returning. We always stand behind and provide excellent after-sales service!.

Check Stock

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4

Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
"NOT" Compatible with PCI-E 4.0 VGA Card.
5 slots offer builders more installation options.
Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..

Check Stock