ReviewsPcr Tube Holder For Cooler

dGTP 100mM, 0.25ML

  • Ready to Go 10mM dNTP mix also available with us..
  • Applications PCR amplification of DNA fragments DNA labeling and DNA sequencing PCR for cloning. Quality Control No contaminating endonuclease or exonuclease activity detected. Functionally tested in PCR.
  • Applications PCR amplification of DNA fragments up to 5 kb DNA labeling and DNA sequencing PCR for cloning. Quality Control No contaminating endonuclease or exonuclease activity detected. Functionally tested in PCR.
Check Stock

Mini Centrifuge Machine 4000rpm 7000rpm Lab Benchtop Centrifuge,2 Rotors for 0.2/0.5/1.5/2ml Micro tubex12 and 0.2ml 8/12 PCR stripex4

  • JOANLAB LC series is is perfect benchtop microcentrifuge for your lab to do quick spin downs.Speed can be switched between 4000RPM and 7000RPM , Max. RCF of 1080 x g/3286xg. Includes an 12-position 1.5/2 mL tube rotor as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes. With the included adapters, 0.2 mL and 0.5 mL strip tubes can also be accommodated in the 12 position tube rotor, further increasing its versatility..
  • ENCLOSED DESIGH reduces the risk of liquid splashing into the equipment. Our this lab mini centrifuge also has a quick release design in which the rotors can be removed and installed without the use of any tools..
  • SAFETY PROTECTION-low voltage power input, sturdy lid, and rotor's safety buckle design. The rotor will stop when lid is opened while in rotation, protecting the operator from being injured by the high-speed spinning rotors..
  • With a quiet motor, and rubber base that absorbs vibrations,JOANLAB LC-4/7S mini centrifuge manchine keeps operational noise to a minimum , less than 47dB and reduces disruptions in the laboratory. And it takes simple operation to a new level. Once the device is powered on, simply place your sample in the centrifuge, close the lid, and it will beg....
Check Stock

5 Pcs Tube Rack Double Panel Microcentrifuge PCR Centrifuge Tube Holder, 60-Well

  • SIZE: 5 Pcs tube racks 60-well per side (12mm diameter and 8mm diameter).
  • COLOR: Green, blue, orange, purple and red. Show as the picture..
  • SIZE: Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter..
  • SUITABLE SIZE:These tube racks accommodates 0.5mL, 1.5mL, and 2mL centrifuge tubes or PCR tubes and 1.8ml cryotubes..
Check Stock

Taq DNA Polymerase (5,000 Units:5 U/ul)

  • dGTP, dCTP and dTTP also available with us..
  • Applications PCR amplification of DNA fragments DNA labeling and DNA sequencing PCR for cloning. Quality Control No contaminating endonuclease or exonuclease activity detected. Functionally tested in PCR.
  • Applications PCR amplification of DNA fragments up to 5 kb DNA labeling and DNA sequencing PCR for cloning. Quality Control No contaminating endonuclease or exonuclease activity detected. Functionally tested in PCR.
Check Stock

BlueAvocado Insulated Tube Cooler Carries 6 Cans Hands-Free Adjustable Cooler Sleeve Orange/Blue

  • DURABLE & COMFORTABLE: Fits 6 regular cans of beer, cider, soda & more.
  • Sling the cooler sleeve over your shoulder.
  • LIGHTWEIGHT, EASY ACCESS: Lightweight, easier than hard, heavy, bulky beer cooler.
  • Zip opening on top, cans slide smoothly in & out.
  • FOR ALL OCCASIONS: Bring refreshments to a backyard BBQ, holiday.
  • Carry to party, picnic, beach, movies in the park.
  • PEVA INSULATION: 100% Polyester exterior, PEVA lining.
  • PEVA insulation ensures cooler tube stays cold up to 4 hours.
  • BLUE AVOCADO INSULATED COOLER TUBE: Includes (1) Tube Cooler By Blue Avocado, Choose Color, New With Tag.
Check Stock

Sugar Fish Drink

  • The cooler fishing rod holder is made of heavy duty polypropylene and powder coated steel which is durable and strong for long lasting use, bracket designed for coolers with tie-down slot to hold fishing pole and drinks on boat, truck, kayak..
  • A fishing rod holder with two drink racks. Good for yeti cooler, rod holster can give a strong support to storage your fishing rod or drinks so that you could easy to access them, and it will bring you a better fishing experience.
  • For RTIC cooler rod holder, could be easy to install into the cooler tie-down slot without getting in the way of the cooler lid, just attaches to the tie-down slot on either end of cooler, and hold rods neatly and securely, protect your fishing rod from any damage.
  • The dimension of fishing rod holders is about 12.6" Long x 10.83" wide that perfectly fits for all YETI Tundra, TANK, and Roadie coolers and RTIC Coolers with tie-down slot, works with all casting and spinning rods. Drinking holder is about 3.5'' long x 3.5'' high, suitable for canned drinks..
  • Each set can holds a fishing pole and 2 drinks, for ....
Check Stock

Beach Chair for Adults, Oversized Camping Chair 500lb, Folding Chair for Outside, Heavy Duty Portable Chair with Armrest, Cooler Bag, Side Pocket, Cup Holder, Outdoor Folding Camping Chair

  • XXL Oversized Chair - The size is 38.5" (wide) X 20" (deep). The ordinary folding chair is 27" (wide) X 15" (deep). The extra large seat provides comfort and support, even on bumpy ground..
  • Heavy Duty - Thickened 0.9" (Dia.) tube, compared to market average of just 0.6-0.7". Strengthened metal structure enables the chair to hold up to 500 lbs..
  • Backpack Director Chair & Wide Use - No assembly required! Collapsible design makes it easy to store and move, perfect for camping, picnicking, traveling, fishing, BBQ, and other outdoor activities..
  • Cooler Bag & Side Pocket & Cup holder - The chair features adjustable armrests with a cup holder and a cooler bag. The side storage pocket can hold your cell phone, snacks, or anything else you might have with you..
  • UV/Weather-resistant fabric - The elegant design and UV protection make it a nicely built product..
Check Stock

Centrifuge Tube Rack,Multifunctional Trapezoidal Holder for 0.2ml-50ml Test Tube, 92 Holes Stand for Lab Tube Vials,Blue,Plastic, Biomed Scientific(Pack of 1)…

  • Material: Polypropylene, Autoclavable at 250 degrees F and 15psi for 20 minutes.
  • Seven different hole diameter：5.2mm，7.6mm，12.1mm，8.2mm, 10.7mm, 16.9mm, 29.3mm.
  • Suitable for storage of common centrifuge tubes in the laboratory, like 0.2ml PCR Tube, 0.5ml, 1.2ml, 1.5ml, 2ml, 5ml, 15ml, 50ml Centrifuge Tube.
  • Since the bottom of the hole between 5.2mm-10.7mm is flat, it can also store vials.
  • Color: Blue, Package: 1* Trapezoidal Test Tube Rack.
Check Stock

0.2ml Individual PCR Tubes, Natural, Flat Cap, Bag of 1000 Tubes/Unit

  • Optically clear flat caps for real-time PCR.
  • Sturdy, robust links between tubes maintain tube strip integrity.
Check Stock

AIEVE Fishing Rod Holder Fishing Pole Holder Fishing Rod Rack Stand Attachment Rod Holders for Boat Cooler Fishing Rod Holder for YETI Coolers and RTIC Coolers with Tie-Down Slot Cooler Accessories

  • AIEVE cooler fishing rod holder fishing pole holder is made of heavy duty rugged polypropylene construction and powder coated steel which is durable....
  • Good for YETI cooler rod holder, rod holster can give a strong support to storage your fishing rod so that you could easy to access them, and this....
  • For RTIC cooler rod holder, could be easy to install into the cooler tie-down slot without getting in the way of the cooler lid, simply push the rod....
  • The fishing pole holder designed to lock-in most fishing rods is about 12.6" Long x 10.83" wide that perfectly fits for all YETI Tundra, TANK, and....
  • For YETI rod holder / for RTIC rod holder , can work with all casting and spinning fishing rods that really save your space while fishing, boating,....
Check Stock

2Set Fishing Rod Holder, Portable Boat Rod Rack Tube, Three-Pole Side Mount Rod Holder, Stand-Off Tube Plastic Fishing Pole Holders with Screws for Boat, Kayak, Fishing Cooler, Trailer, Garage Storage

  • Quality Material: The rod holder made from strong ABS plastic material, durable and lightweight, designed exclusively to endure the harsh marine environment.
  • Including stainless steel screws for firmly securing the rack tube.
  • Multi-part: 10.6" Rod holders with fishing reel slots, each tube can hold fishing pole upright for storage.
  • The black fishing rod holder also available for fishing lures, a filet knife, pliers, and tackle, so enjoy your fishing journey!.
  • Easy to Install: These fishing pole holders are great for installing in kayak, fishing cooler, trailer and indoor wall (Can be installed separately or as a whole).
  • Simply screw in place, provides easy access to your rods and sticks.
  • Package Content: 2 Set of fishing rod holders comes with screws and nuts for your daily use or share with friends.
  • Necessary helper for sea fishing and bank fishing.
  • Must-have Tools: The fishing rod rack perfect for fishing enthusiast, 3-tube fishing rod bracket is the best choice for boat, kayak crate, car back and etc. Protects favorite rods from damage during transport or storage.
Check Stock