ReviewsPdr Kit With Slide Hammer

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.

Check Stock

Fly5D Complete Paintless Auto Dent Removal Tools Set, PDR Dent Puller Kit for Autobody Repair of Dents with Different Aluminum Dent Pull Tabs Can Be Reused Countless Times

... everything in the first picture,Come with 46pcs dent puller tabs,Contains 6pcs of Aluminum Pull Tabs which are more solid,not easy to break,can be reused.Professional grade dent pulling tabs for paintless auto dent repair.Different Kinds of size spiral tabs are suitable for almost dents and hail damage..
2in1 Slide Hammer Dent Remover - 2in1 T-bar auto dent removal tool is used with different size of the glue puller tabs for Paintless Dent Removal.Slide hammer is more powerful for DIY Dent Repair, conquer big dents.
The upgrade bridge dent puller and gold dent lifter is more suitable for repairing small and medium dents..
100% Protect the Body Paint- DIY Paintless Dent Repair is the most cost effective method for removing car door dings hail dents Motorcycle Tank Dent etc.Efficient and safe to pop out dents,Our dent repair process will 100% protect the body paint.Whether you decide you want to tackle a full dent repair project, or just want to save money by doing minor repairs yourself, FLY5D is the best choice for you!.
Glue Removing Instruction: In general, After fixing the dent,use alcohol to clean the extra glue on the car and the puller sets.Well done.In the winter,Heat up the glue for 30 seconds with hot water. Or extend the heating time to 1 minu....

Check Stock

YOOHE Paintless Dent Repair Puller Kit - Dent Puller Slide Hammer T-Bar Tool with 16pcs Dent Removal Pulling Tabs for Car Auto Body Hail Damage Remover

【SAVE TIME &COST】: Dent repair kit can save a lot of money for you compared with the auto body shops, our paintless dent removal tools kit can help you repair your cars by yourself for many times..
【 INSPIRED DESIGN】 : Our slide hammer T bar puller tool uses a lever-type design for metal panel dent repair works, and can also be decomposed into two different T bar, clever use..
【Widely used】: The Slide Hammer T-Bar Tool is not only for car dent removal, but also can be used refrigerator, motorcycle body, washing machine and hail damage..
【Corresponding to different dents】: The Slide Hammer Tool contains two kinds of plastic tabs, a total of 16pcs professional tabs can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted..
【DURABLE】: Tempered high carbon stainless steels and standard stainless steel are used depending on the design of a particular tool. rubber and durable plastic, they will don't hurt the auto surface, very sturdy and keep a long lifetime..

Check Stock

maXpeedingrods 13LBS Dent Puller Slide Hammer Heavy Duty Auto Body Truck Repair Tool Kit,18 Pieces Slide Hammer Puller Set

【Item Is Heavy】Heavy duty drop-forged carbon steel construction, tempered and treated with oxide to resist rust and corrosion for added durability.
【Great For Automotive And Industrial Work】The slide hammer dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsterers.
【18 Pieces】 Complete 18 pieces slide hammer puller set for a wide range of pulling applications. Including slide hammer, rubber cover, 6 pcs hasp iron, long tube hasp iron, cast iron hammer,hex nut, right angle flat steel,circular pipe, hex taping adaptor, hex taping screw holder, tapping screw,connector hasp iron,double barreled connector,carry case.
【Versatile Puller Set】 Versatile puller assortment lets you handle all kinds of pounding and pulling operations. Can easily pull bushings/seals/sleeves/bearings/dents/pressed-in bolts.
【Best Options For You】If taking it to a body shop to fix a new dent seems too time-consuming or expensive, maXpeedingrods dent repair kit offers a way of doing ....

Check Stock

Mophorn Dent Puller Stud Welder Dent Repair Kit 110V Stud Welder Kit 800 VA Spot Welder 1000 Nails for Car Body Panel

...elder kit is made of high-quality ABS body, has good stability under high-temperature conditions, withstand temperature of 93-118℃, and the movement is pure copper electrode. This welder stud kit is wear-resistant, strong and sturdy. In short, it is an excellent tool for professionals or novices..
Heavy Duty Slide Hammer: The stud welder dent repair kit is designed with thermal protection function. When the temperature of the transformer reaches 203 °F, the thermal protection function of the machine will work, providing long-term welding, security and higher efficiency..
Overheat Protection: The heavy-duty spot welder stud with quick-release chuck can hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of the cast iron slide contributes to comfortable grip..
One-handed Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state. And this stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small and can be used flexibly in any position..

Check Stock

YIUIY Car Dent Repair Pullers Air Pneumatic Dent Puller Suction Cup Car Auto Body Repairing Slide Hammer Kit Hammer Tools Hand Tool

【FITMENT】:Slide hammer puller is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine..
【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents..
【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating..
【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits..
【ESSENTIAL TOOLS FOR DENTS】:This pneumatic dent puller is an essential tool for pulling out dents from vehicles. The dents on cars can be simply removed by placing the suction cup over the dent on the panel and using the built-in slide hammer..

Check Stock

Qiilu Pull Hammer Heavy Pneumatic Sag Repair Pull Hammer Car Body Dent Repair Suction Cup Slide Tool

【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating..
【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents..
【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits..
【WIDE APPLICATIONS】slide hammer puller is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine..
【DURABLE】:It is durable for years of use, our sag repair kit can help you repair your cars by yourself for many times..

Check Stock

Mophorn Stud Welder Kit 1600A Stud Welder Dent Repair Kit 800VA Spot Welder Stud 110V Welder Stud Kit Stud Gun Dent Puller Kit with Complete Accessories Dent Welder Repair for Auto Body Repairing

Thermal Protection: The stud welder dent repair kit is designed with thermal protection function. When the temperature of the transformer reaches 95°C (203°F), the thermal protection function of the machine will work, providing long-term welding, security and higher efficiency..
Heavy Duty Slide Hammer: The heavy-duty spot welder stud with quick-release chuck can hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of cast iron slide contributes to comfortable grip..
One-handed Simple Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state..
Useful Accessories Included: This stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small in size and can be used flexibly in any position. The tool box makes the welding accessories neat and portable..

Check Stock

YOOHE Dent Puller Kit - 53pcs Paintless Dent Repair Kit with Slide Hammer T-Bar Dent Puller and Adjustable Gold Dent Lifter Puller for Car Hail Damage Dent & Ding Remover

PERFECT TOOL - Our car dent puller kit with a total of 53pcs, it is a complete DIY body dent repair kit. Including the most classic and popular tools....
UNIQUE DESIGN - Using the principle of leverage to design the dent puller is ergonomic, the golden dent lifter with a unique can adjust Width and....
PRO 2 in 1 SLIDE HAMMER - The T-bar slide hammer dent puller have two ways to use. Long T-bar dent puller tool is a labor-saving pulling mode via....
SO EASY TO OPERATE - Our dent puller kit coming with detailed repair steps introduction for operate, it make the dent removal process so easy. These....
TECHNICAL SUPPORT - You will enjoy professional service center, 30-day full amount refunding, Excellent customer service brings you no worries after....

Check Stock

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.

Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

[Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
Lightweight dent puller slide hammer tool ensures maximum pull power.
[Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
[Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
Then, pull back on the T handle, while you snap the weight towards the handle.
Weighted slide hammer adds torque and pull-power.
[Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
[Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....

Check Stock