ReviewsPe Carbon Pipe

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.

Check Stock

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
Min. Wall Thicknes: 0.090 (100 Foot Length).
Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....

Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....

Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
Uncoated Tools for Versatile Use: Unco....

Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.

Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

...10V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manual.

Check Stock

Libraton PVC Pipe Cutter 2-1/2\

IMPROVED BLADE: The Libraton PVC pipe cutter blade is of SK5 material, and an improved hardness process can ensure its longer service life..
CUTTING RANGE: The PVC cutter is of large cutting range, up to 2-1/2-inch (63mm) outer diameter..
WIDE APPLICATION: The ratchet PVC cutter can be also applied to cut different plastics pipes and tubes (PVC, PEX, CPVC, PP-R, PE, Rubber Hose, etc.). It is not recommended for cutting THIN PVC pipe..
RATCHET DESIGN: The plastic pipe cutter is designed with a ratcheting driver so that you can do the pipe cutting job with one hand easily. OUR TEST SHOWS THAT ONE CUT WITHIN 5 TO 20 SECONDS ONLY..
AFTER-SALES SERVICE: We offer a 12-month warranty on this PVC pipe cutter. And our after-sales service team promise to reply to your ANY question WITHIN 24H to help you solve ANY problem with the PVC cutter..

Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

...r Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
5.[Packing]: Each set includes welding shoe....

Check Stock

PVC Cutter 2-1/2\

【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....

Check Stock

100 Pieces Half Clamps J-Hook with Nail, Black, for Pex Tubing Pipe Support (1/2 Inch, 3/4 Inch)

Material: the half clamps j-hook are made of PE plastic, sturdy and durable, can be applied for a long time.
Universal size: you will receiver 50 piece 1/2 inch clamps and 50 pieces 3/4 inch clamps, different sizes can meet different needs, and the quantity is enough.
Save your energy: durable and stable plastic construction can create a better piping support effect.
High-carbon steel nails have a high hardness, so that they do not bend or damage easily upon impact.
Pointed spike can easily fit through walls.
Application: tube talons (J-clamp) can be applied to attach pipes, like PEX, copper, to wooden surfaces, such as studs, joists, plywood, subfloor, and more.
Easy to use: half clamp hanger design makes supporting and removing pipe faster and more easily, half clamp can effectively reduce noise.

Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

Fitting connects to schedule 40 PE pipe on both ends.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock