ReviewsPe Plastic Tube

Beduan Push to Connect Fitting 3/8 Tube OD x 1/4 NPT Thread Male Straight Pneumatic Air Fitting Pack of 10

Body Style: Male Straight / Size:3/8” Tube OD x 1/4“ NPT thread Straight push in connect fitting.
Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR.
Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg.

Check Stock

VETLEY PNEUMATIC Black Air Straight Union 1/4 Inch Tube OD Check Valve Quick Release Push to Connect Fitting CVPU1/4 Pack of 2

1.Product Name: Air Straight Union Check Valve.
3.Product Material:Nickel-plated copper,Plastic.
4.Working Temperature:32~160 °F / 0~70°C.
Working Pressure:0~150 PSI / 0~9.9kgf/cm2(0~990 kPa).
5. Application of Tube:PU/PE/PA/PVC/Nylon/PTFE.

Check Stock

Adjustable Irrigation Drippers,Adjustable 360 Degree Water Flow Drip Irrigation System Drip Emitters for 4/7mm Tube PE Pipe for Flower beds, Vegetable Gardens, Herbs Gardens 50PCS

Irrigation Drippers Size: total length: 5.2 inches.
water outlet hole diameter: 0.05 inch .Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top..
Plastic Irrigation Dripper: these drip emitters are made of quality plastic. Color: Black. The bottom is sharp and easy to insert into the soil..
Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money..
How to Connect: 1. Connect to the PE pipe directly. 2. Connect to the 4/7 distribution tubing. Tips: Soften the tube hole with hot water before connecting the tube and dripper..
Wide Application: Suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouse, orchard, lawn, self plant and so on..

Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Quick disconnect simply push tubing in, no to....

Check Stock

TAILONZ PNEUMATIC 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight 40 pcs

【Product Name】1/4 ‘’ Plastic Push to connect fittings (40Pcs).
【Fluid Type】Air Only【Applicable Tube】Pu/Nylon/Soft PE tube.
【Pressure Range】0~145Psi【Temperature Range】0-60°C | 32～140°F.
【Advantages】High pressure resistance, easy installation and long service life..
【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.

Check Stock

Hose Barb Fitting Plastic Barb Joint Splicer Mender Adapter Union for Pipe Air Line,5/32 x5/32 ,3/16 x3/16 ,7/32 x7/32 ,1/4 x1/4 ,5/16 x5/16 ,3/8 x3/8 ,7/16 x7/16 ,1/2 x1/2 ,5/8 x5/8 ,3/4 x3/4 ,50Pcs

【Package Included】 50 pieces Plastic barb connectors in total, including 5pcs 5/32"x5/32", 5pcs 3/16"x3/16", 5pcs 7/32"x7/32", 5pcs 1/4"x1/4", 5pcs 5/16"x5/16", 5pcs 3/8"x3/8", 5pcs 7/16"x7/16", 5pcs 1/2"x1/2", 5pcs 5/8"x5/8", 5pcs 3/4"x3/4".Almost all sizes are included to meet different diameter pipes..
【Material】The 3/4"x3/4" barbed hose fittings are made of milky white PE (polyethylene) plastic, and the others are made of PP polypropylene plastic, they are durable, strong, water resistant, chemical-resistant materials to assure long life..
【Working Temperature & Pressure】 1. Translucent PP (polypropylene) temperature range: -22 °F to 284 °F. It is resistant to corrosion by acid, alkali, salt solution and various organic solvents below 176 °F, and can be decomposed under high temperature and oxidation. The melting point is 329 °F, and it softens at about 311 °F. 2. Milky white PE (polyethylene) temperature range: -76 °F to 197.6 °F. Melting point is 233.6°F..
【Easy Installation】 Barb hose is easy to install without glue, or other tools required. Barbed ends grab the tubing tightly that won't leak.
If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will ....

Check Stock

AGOOBO PVC Pipe Cutter, Up to 2-1/2 inch, Ratchet PVC Pipe Cutter SK5 Sharp Blades, Pipe Tube Cutter for PVC PPR PEX Plastic Hoses and Plumbing Pipe

【High Quality and Safety】The durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting..
【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue..
【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter wi....

Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4\ Tube OD x 1/8\ NPT Thread

Made of quality plastic and stainless steel for durable use.
Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
Working Temperature: 0-60°C | 32～140°F.

Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4 Tube OD x 1/4 NPT Thread

Made of quality plastic and stainless steel for durable use.
Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
Working Temperature: 0-60°C | 32～140°F.

Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

...tion tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the figure 8 end cap plugs used for clamp the end of 1/2" irrigation tubing for stopping water flow. These ir....

Check Stock

TAILONZ PNEUMATIC Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread Push to Connect Fittings PC-1/4-N2+PL-1/4-N2(Pack of 12)

【Product Name】Elbow and Straight Push-in Connect Fittings.
【Size】1/4" Tube OD x 1/4" NPT Thread.
【Maximum Pressure】145Psi【Working Temperature】32～140°F.

Check Stock