ReviewsPe Tubing Fittings

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

JoyTube Plastic 1/4 ID Hose Barb Fittings Equal Barbed Tee Pipe Connectors 3 Way Joint Splicer Mender Union Adapter for Boat Aquarium Pack of 6

  • Plastic Tee hose barb can be easily connected with 1/4" ID tubing hose line..
  • Made of polyethylene(PE) high quality plastic material, firm and durable, which can withstand -9 °F to 175 °F temperature, but it's not resistant to oil..
  • Wide range of use: Suitable for applications in garden, pharmaceutical, fooand beverage, laboratory, aquarium and others..
  • Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable..
  • Plastic barbed fittings can be used with PVC, PU, Rubber hose or tubing..
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Irrigation Fittings Kit Hoomtry Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Pot Vegetable Garden Lawn（Straight Barbs Tees Elbows End Plug 4-Way Coupling）

  • Plastic 1/4 Irrigation Fittings Kits: 208 Pcs 1/4 inch drip irrigation tubing kits total, 80 straight barbs, 68 three-way pipes, 20 elbow fittings, 20 end plugs and 20 four-way pipe joints, the number is sufficient to meet your needs for garden irrigation accessories various needs..
  • No tool required: The lrrigation fittings kit secure, Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection.
  • Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
  • Confirm Drip Irrigation Tubing Size: These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.Please check the size carefully before purchasing..
  • Easy to Use: This irrigation fittings kit is made of quality engineering plastics that is durable, strong, water resistant, chemical-resistant for long time using. These drip irrigation accessories work well with the tubing..
  • Excellent customers service: You are not completely satisfied with Hoomtry plastic drip irrig....
Check Stock

Arlon Silicone Self Fusing Tapes Amalgamation Rubber Tapes for Emergency Pipe Fishing Rod Marine Underwater Wrapping Pack of 2

  • Pack of 2 Rolls With PE Bag Each | Black Color |Size 25.4MM Width 10 Feet Length 0.5MM Thickness |Rectangle Shape| PLEASE STRETCH 2 TO 4 TIMES LENGTH TO WRAP FOR BEST PERFORMANCE.
  • Material 100% Specially Formulated Silicone Rubber | Temperature -50 to 260 °C.
  • Versatile Application for vehicles & equipment for emergency hose repair | Seal leaky hoses, pipe, tubing. Waterproof electrical connections and terminals | Use as an emergency fan belt. Work even over wet, dirty or oily surfaces | Tourniquet or emergency wrap over bleeding injuries | permanent airtight, Watertight seal in seconds, repair & seal leaky hoses, pipes, tubing, lines, & fittings.
  • Resists moisture, oxygen, and ozone to assure continuous high insulation values. | Conforms smoothly when wrapped around complex forms. | Bonds to itself at room temperature within 24 hours. | Remains non-tacky to the touch and does not adhere to other surfaces, or substrates.| Insulates with single wrap, thereby reducing labor time and cost.| Dampens vibration and resists heat and mechanical shock as well as corona. | All tapes are protected by a special interleaved liner..
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

Sharkbite 25031A Washing Machine Outlet Box with Water Hammer Arrestor, 1/2 inch x 3/4 inch MHT, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

  • INSTALLS IN SECONDS: Washing machine outlet box requires no special tools, no soldering, no crimping, unions or glue to connect. Just push to create a watertight seal.
  • COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • ... Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on..
Check Stock