ReviewsPeak Values Cardss

Omnirial2 True MIMO ±45° Antenna for NetGear Around Town Dual Omni

  • The Omnirial2™ is a true MIMO (±45° polarizations) dual antenna made to enhance your NetGear Around Town signal and SINR/CINR. For best results,....
  • This Omnirial2™ system will connect directly to your NetGear Around Town, supporting all its frequency bands and modes of operation. It is....
  • This Omnirial2™ system is specifically effective with the 4G signal, but will also work with 3G as long as your device allows it. This set, made for....
  • The Omnirial2™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture....
  • Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed Omnirial2™ located....
Check Stock

WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display

  • DC Power and Probe are Not included. With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (NOT Included), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display.
  • Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value.
  • Adopts ARM Cortex-M3 processor (STM32F103C8).
  • Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error.
  • Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate.
  • Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls contact us if have any quality issue and need support, will reply within 24hours, refund or replace with a new one.
Check Stock

0-100HD Shore D Hardness Durometer Digital Durometer Scale for Rubber, Tire, Plastic, Thermal Plastic, Flooring, Bowling balll with Large LCD Display

  • 5.Suitable for the surface hardness test of sand mold in high pressure molding. * The unit of type B hardness tester for sand mold surface is (g/mm2), but it is customary to use hardness H(A/B/C) instead of unit. Because their values are related and consistent, the corresponding hardness value is also large when the unit value is large (g/mm2)..
Check Stock

GigaMIMO MIMO/Dual Antenna for NetGear Around Town Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

  • The GigaMIMO™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service....
  • The GigaMIMO™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for....
  • The GigaMIMO™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your....
  • The GigaMIMO™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of....
  • Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO™ located....
Check Stock

STEELMAN PRO 91927 SmartEAR 1 Sound and Vibration Detection Kit

  • VIBRATION SENSOR CLAMP - Vibration sensor clamp with 16-foot cord provides the ability to detect surface vibrations produced by moving internal parts.
  • STETHOSCOPE PROBE - Aluminum probe works with the detachable sound wand as an electronic stethoscope for hands-on diagnostics.
  • EARBUD HEADPHONES - 3.5mm earbud style headphones feature a braided wire jacket to eliminate possible stretching / tearing of the plug wires.
  • TWO CONNECTORS - Kit includes both a dual pin dongle with a sliding 3.5mm plug to fit a range of smart devices and a 3.5mm dual port connector.
  • FREE SOFTWARE - Free downloadable software from Google Play and Apple iTunes stores and works on a range of Android and iPhone / iPad devices.
  • APP FEATURES - App displays sound level readings including average, peak, and real-time values and shows results on screen as analog meter or digital readout.
  • STORAGE POUCH - Comes with a nylon zipper secured pouch for easy storage of hardware components.
Check Stock

Leviton 1K240-2W Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Split Core CTs

  • Electricity tariff support 4 decimals, the decimal point can be set to 0 between 4. It supports 3 charges: simple tariff, time-sharing tariff and stage tariff. Time-sharing tariff support 8 time periods to calculate the cost, which can be used for peak and valley billing. Stage tariff support 8 stages power rates. You can set the date that begin to charge the stage billing.
  • It has the function of alarm, you can set values for voltage, current, or power. If they were exceeded, the monitor will alarm automatically.
  • It has the function of clearing the total electricity, history data and factory reset.
  • It supports 1000:1 or 2000:1 current transformer, the max current of the transformer is 120A.
Check Stock

Omnirial2-Plus True MIMO ±45° Antenna for NetGear Around Town High Gain

  • The Omnirial2-Plus™ is a true MIMO (±45° polarizations), higher gain dual antenna made to enhance your NetGear Around Town signal and SINR/CINR.....
  • This Omnirial2-Plus™ system will connect directly to your NetGear Around Town, supporting all its frequency bands and modes of operation. It is....
  • This Omnirial2-Plus™ system is specifically effective with the 4G signal, but will also work with 3G as long as your device allows it. This set,....
  • The Omnirial2-Plus™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical....
  • Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed Omnirial2-Plus™ located....
Check Stock

Pridefend Professional Digital Trigger Pull Gauge,0-12 lbs Trigger Pull Scale,1 Oz Increments for Accurate Readings,Trigger Pull Gauge with LCD Display (Black)

  • ...eal time function provides real time readings of the sensor.It can be cleared and reset in the event of an error..
  • [Powerful Memory Function] Stores and records numerous trigger pulls, records maximum, minimum and average pull weights and trigger pulls. Note: Multiple readings are recommended to obtain more accurate values ,Please pull firmly trigger and measurements should be taken at 2-second intervals..
  • [Ease Of Use]: You'll get 1*trigger pull gauge, 1* instruction manual (2'AAA'batteries,Not Included) . This trigger pull scale allows you to fully understand and measure the trigger to produce accurate values.No worries after sale,we offer a free money back guarantee(Note: Avoid applying any force to the sensor when switching it on, otherwise it will not work properly.).
Check Stock

CPS BLACKMAX BTLDTW Adjustable Electronic Torque Wrench

  • WHY BLACKMAX: Ideal for HVAC mini-split installations or where OEM-specified torque settings are critical, the BlackMax digital torque wrench exceeds the capabilities of mechanical-only torque wrenches by offering a variety of user-friendly features in a lightweight, durable and ergonomic housing.
  • PRESETS: The BTLDTW stores 5 factory and 5 user-defined presets, and is able to simultaneously display stored vs. actual torque values.
  • READABILITY: Large display numbers prevent misreading torque data, a common problem when using wrenches without digital displays.
  • CUSTOMIZABLE: View “Peak” and “Track” torque data with audible (tone), visual (LED) and tactile (vibration) “torque alerts” to prevent over-tightening by providing advance warning when approaching or exceeding predefined torque settings.
  • ABOUT US: CPS Products is a business built by technicians, for technicians. We design Tools for the Professional Service Technician. With the world’s most comprehensive range of Leak Detection technologies, Smart Diagnostic tools, and proven Maintenance Solutions, CPS Products has been The Workingman’s Choice since 1989.
Check Stock

WideAnt-5G™ 5G and 4G Antenna for Modems Hotspots Routers High-Gain Ultra-Wide Band Mount not Included

  • The WideAnt-5G™ is an elegant, larger, fully enclosed, powerful directional antenna (two antennas required to connect to MIMO devices--search for....
  • The WideAnt-5G™ features a 24K gold plated N-Female connector built directly onto the antenna's body for maximum power transfer and bandwidth..
  • The WideAnt-5G™ can be used with 5G and 4G modems, hotspots, routers, and M2M devices (device-specific adapter not included). The WideAnt-5G™ is....
  • The WideAnt-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of (varies)° and a vertical....
  • Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed WideAnt-5G™ located....
Check Stock

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for NetGear Around Town Omnidirectional Diversity/Aux Enclosed ±45° Polarization

  • This GigaMIMO-5G™ set will connect directly to the NetGear Around Town, taking full advantage of its advanced MIMO feature (±45° polarizations as....
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by....
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and....
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture....
  • Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located....
Check Stock