ReviewsPedal Power Supplies

DCT Foot Operated On Off Switch Foot Pedal Switch - 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch

POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free.
HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch.
Easily start and stop power tools with this foot activated on off switch.
Provides continuous power until turned off.
COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included).
Compatible with variable speed equipment (15 amp foot switch does not allow for speed control).
EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch.
Push the electric pedal forward for power output, then push again to shut off the power.
DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere.
6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3....

Check Stock

Donner Overdrive Guitar Effect Pedal, Blues Drive Vintage Overdrive with DP-1 Guitar Power Supply

[Overdrive Pedal] Combining iconic vintage tube overdrive sound with wide dynamic range and flflexible controls, this pedal gives you a wide tonal range from smooth whispers to searing leads..
[Overdrive Pedal] Feature an easy-to-use three-knob tone control: LEVEL (output volume), TONE (brightness) and GAIN (overdrive amount) for using in different scenarios. Each knob gives you a wide control range..
[Overdrive Pedal] Offer a the 2-way selector for choosing from two sound types for satisfying different musicians: Hot: Providing a louder, tightened sound Warm: The classic TS overdrive sound replica..
[Power Supply] 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected. Power: AC 100v-240V Input: DC 18V，Powers For 9V、12V or 18V PEDAL.
[Power Supply] Includes link Moukey power cables (10pcs).

Check Stock

Donner Compressor Pedal Ultimate Comp Guitar Effect Pedal with DP-1 Guitar Power Supply

[Compressor Pedal] TLevel ,Comp,Tone knobs allow you to dial in your desired sound.Two modes:Normal and Treble compression..
[Compressor Pedal] Our circuit has been optimized according to the characteristics of the electric guitar and performs outstandingly over the spectrum of different playing styles..
[Compressor Pedal] The compressed tone is round and smooth,full of musicality, and perfectly retains the original guitar tone..
[Power Supply] 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected. Power: AC 100v-240V Input: DC 18V，Powers For 9V、12V or 18V PEDAL.
[Power Supply] Includes link Moukey power cables (10pcs).

Check Stock

Dragonhawk Pro Complete Tattoo Pen Kit - Atom Lightweight Tattoo Pen Machine 20Pcs Cartridges Needles Power Supplies for Tattoo & Pmu Beginners 1013-7-2

Dragonhawk Atom Tattoo Pen Kit: It has main supplies to start your tattoo work, the Atom tattoo pen has 3.5mm stroke length that better for starter get easy tattoo lining and shading, permanent makeup work..
Professional Tattoo Kit: All Dragonhawk tattoo supplies tested by pro artists. We provide all pro tattoo supplies for beginner. cartridges needles are Ethylene oxide (EO) gas sterilized and individually packaged. Atom tattoo pen used with our pro team to tattooing..
All Tattoo Supplies Quality Warranty: the all parts in this tattoo kit have been tested before sent out. There are three procedures for quality inspection in Dragonhawk factory. If you have any products problem, Dragonhawk world wide customer service can help you soon..
Dragonhawk Atom Tattoo Pen and Cartridges Needles: Atom tattoo pen machine has 3.5mm stroke length, continuous operation, Low noise, Long-lasting stability, Light weight, unibody. This Dragonhawk tattoo cartridges needles diameter: #12. Polished, long taper.
reliable for all-purpose work. One piece needle and plunger overmold allows for maximum stability and control..
Package include: 1pc Atom Pen Rotary Tattoo Machine with DC Clip Cord, 1pc Power Supply with cable, 20pcs assorted sizes Cartridge Needles 1pc Foot Pedal.

Check Stock

Tattoo Kit Professional Inkstar 1 Machine Venture Set Gun No Ink Original (153 PCS)

Inkstar Blue Box power supply with clip cord, foot pedal, and 7% Hildbrandt VIP Membership Card.
Tattoo Supplies - o rings pack, step bushings, rubber bands, and tuning key set.
20 Hildbrandt professional needles in sets of 4 different needle groupings, aluminum grip (pictured with stainless tip for artistic representation, stainless tip not included) and sterilized disposable tubes that correspond to needles.

Check Stock

One Tattoo World Dual Digital LCD Tattoo Machine Power Supply | LCD Display | Stainless Steel Pedal & 2 Clip Cords | Red

...power cord. The red power supply box may work with rotary tattoo machines, tattoo guns, and other machines as well. This unit comes with all the parts you need to get tattooing..
PROFESSIONAL QUALITY: All of our tattooing tools are made with quality materials. We pride ourselves on creating professional-grade tattoo supplies for a fraction of the cost. With the help of this high-quality power supply machine, you’ll be able to create the tattoo you've always wanted from the comfort of your home. Our supplies will also work well in a professional tattooing establishment..
CONNECT LINER & SHADER MACHINES SIMULTANEOUSLY: This dual power supply unit allows the tattoo artist to connect liner and shader machines simultaneously, streamlining the tattooing process and providing effortless results. To switch from a liner to a shader, simply flip the switch on the lower left corner to divert the power to the desired device..
110/220V CONVERSION SWITCH: The digital, ultra-bright LCD screen makes it incredibly easy to ready the voltage and provides an overall more accurate readout than other machines like it. We have included a 110/220V conversion switch on the back. This affordable power supply box goes great with your at-home permanent tattoo kit..

Check Stock

Gamechanger Audio Plus Sustain Pedal

The PLUS Pedal is a piano style sustain pedal for guitars and all other melodic instruments. It samples, sustains and layers any melodic sound made by any instrument..
It allows to compose otherwise impossible song arrangements using just one instrument..
Create lush layered soundscapes and ambiances without multi-effect setups..
Transform chords into synth-like pads and beautiful textures..
Power supply is not included. The PLUS Pedal uses standard 9 V DC center negative pedal power supply..

Check Stock

Favero Assioma Pedal Based Bike Power Meter with Included Wearable4U Cycling Multi Tool Bundle (Duo)

IN THE BOX: Favero Assioma DUO Power-meter Cycling Pedals (MPN 00772-01), Wearable4U Cycling Multi Tool.
True Left/Right Power Data – The Favero Assioma DUO have a sensor in each pedal, allowing them to measure left and right leg power..
Easy to install. Fast to move between bikes – Install and move your Assioma power meter from one bike to another just like a normal pedal, easily and without special tools..
Pedaling analytics. Not just power and cadence – power sensors are placed on the pedals, exactly where your force is applied, to provide you accurate observation of your pedal strokes (Left/Right balance, Torque efficiency, Pedal smoothness).
No waste of energy or time – Rechargeable batteries(up to 50 hrs), automatic stand-by (assioma automatically sets to stand-by and instantly switches on as soon as you start pedaling), magnetic connectors for charging.

Check Stock

Donner DP-1 Guitar Power Supply with DP-Z 9V Guitar Pedal Power Supply 11 Isolated DC Output with USB Port for 9V/12V/18V Effect Pedal DC 18v 2000m Input

10 ISOLATED OUTPUTS:Donner DP-1 9V Guitar Pedal Power Supply has 10 outputs ,which includes 7 ways 9V 100mA, 1 way 9V 500mA, 1 way 12V 100mA, 1 way 18V 100mA..
NOISE REDUCTION CIRCUIT DESIGN：Donner Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during use..
【Super Power Adapter】Donner DP-Z 9V Guitar Pedal Power Supply equips with superpower adapter: DC 18v 2000mA ，this powerful input ensures that every output is in the best possible state..
【10 Isolated Outputs + 1 USB charge port 】 Donner DP-Z 9V Guitar Pedal Power Supply has 10 outputs ,which includes 4 x 9V 100mA, 3 x 9V 300mA, 1 x 9V 500mA, 1 x 9V/12V 500mA, 1 x 18V 300mA with 1 x DC 18V input, 1 x USB charge port. 10 Isolated Output ,5v 1000 mA USB charge port Meet the power demand of Mobile devices ..
【Noise Reduction Circuit Design】Donner Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during u....

Check Stock

Guitar Pedal Board, Aluminium Alloy 2.2lb Light Pedal Board 19.0×9.6×1.7 Inch Black Pedalboard with Hook & Loop Tapes

Aluminium alloy material----Made of aluminium alloy, the guitar pedal board, 2.2lb ultra-lightweight, is very convenient and portable for your gig or home practice. With rubber feet, the pedal is quite stable and it can hold 10 mini single pedals..
Suitable power supply----All kinds of power supply can fit to this guitar pedal board. You could install power supply anywhere of the pedal board at your will..
Well-Adhesive Velcro----Two rolls of Velcro necessary to attach your guitar effects pedals to the pedal board are involved, which are very adhesive. Your pedals will be sturdy on your pedalboard during using and on transportation..
Slight incline design----With slight incline design, it is more convenient and comfortable for you to step pedals on the board than the flat design board.
Apply to----The guitar pedal board is suitable for beginners and professionals to operate your guitar effects pedals on gig or at home..

Check Stock

Guitar Pedal Board, Aluminium Alloy 2.2lb Light Pedal Board 19.0×9.6×1.7 Inch Black Pedalboard with Hook & Loop Tapes

1.Aluminium alloy material----Made of aluminium alloy, the guitar pedal board, 2.2lb ultra-lightweight, is very convenient and portable for your gig or home practice. With rubber feet, the pedal is quite stable and it can hold 10 mini single pedals..
2.Suitable power supply----All kinds of power supply can fit to this guitar pedal board. You could install power supply anywhere of the pedal board at your will..
3.Well-Adhesive Velcro----Two rolls of Velcro necessary to attach your guitar effects pedals to the pedal board are involved, which are very adhesive. Your pedals will be sturdy on your pedalboard during using and on transportation..
4.Slight incline design----With slight incline design, it is more convenient and comfortable for you to step pedals on the board than the flat design board..
5.Apply to----The guitar pedal board is suitable for beginners and professionals to operate your guitar effects pedals on gig or at home..

Check Stock