ReviewsPedestrian Signal Module

ESP8266 Wire~Less Wi~Fi Transceiver Relay Module, 4 Channel DC 5V Smart Switch Relay Module for Smart Home Automation System IOT A~PP Con~Troller

  • SUPPORT TWO WORK MODE: Mode 1: cellphone carry on WIFI module directly. Mode 2: cellphone and WIFI module carry on router together..
  • TRANSMISSION DISTANCE: In the open environment,when mobile phone is carrying on the WIFI module ,maximum transmission distance is 100 meter. When the WIFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal..
  • SAFE: Optocoupler isolated output, safe and reliable..
  • LED INDICATOR: On board relay LED indicator , mode option and working statue LED indicator..
  • SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..
Check Stock

YVO Optocoupler Isolation Board,4 Channel Optocoupler Isolation Module PLC Signal Level Voltage Conversion Board,Can be Used for Signal Isolation,Signal Level Voltage Conversion (24V to 5V)

  • 【Widely Use】: Our optocoupler isolation board can be used for signal isolation, PLC signal level converting, level conversion between single-chip microcomputer, PLC and other signals, PNP / NPN signal to NPN signal, signal level voltage conversion and other purposes..
  • 【20K Limit Switching Frequency】: The maximum switching frequency of our optocoupler isolation is 20K..
  • 【Easy To Recognise】: Each channel of our optocoupler isolator module has been equipped with indicator, easier to recognise the working status..
  • 【Size Parameters】: Module Dimensions: 72*55*18mm (length*width*height). Mounting Hole Size: 64*47mm. Mounting Hole Diameter: 3mm..
  • 【SHOPPING WITH CONFIDENCE】: We are committed to providing you with quality services. If you have any question, please feel free to contact us by sending emails.We will provide after-sales service until you are satisfied..
Check Stock

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

  • RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
  • Turn on the tracking source output bandwidth 33mhz---3000mhz.
  • Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
  • Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
  • Computer operating system: Winxp, Win7, Win10.
  • 35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
  • Signal Tracking Source Module with Shell. Sweep Step: ≥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....
Check Stock

ACEIRMC HC-SR04 Ultrasonic Sensor Distance Module for Nano Robot XBee ZigBee by ElecRight（5pcs

  • HC-SR04 Ultrasonic Sensor Distance Module: using IO trigger for at least 10us high level signal.
  • This module has stable performance and accurate measurement distance..
  • Detection distance: 0.78~196 in/ (2cm~500cm).
  • This module is fully Compatible with GH-311 anti-theft module..
  • HC-SR04 Ultrasonic Sensor Distance Module for Nano Robot XBee ZigBee by ElecRight.
Check Stock

AD834 Four Quadrant Multiplier Radio Frequency Mixer Module Multiplier Signal Processing for Mixers Filters

  • 【High Quality】The quadrant multiplier is made of high quality meterial, adopts the differential balun to single‑ended structure, can effectively suppresses harmonics..
  • 【Feature】The quadrant multiplier module is compact design, easy to carry and store, works well for differential merging and making the output signal symmetrical..
  • 【Advantage】AD834 Quadrant analog multiplier is an important component of modern signal processing systems, 1.6mm / 0.06in Thickness PCB double panel to ensure good passing performance of small and large current..
  • 【Application】The radio frequency module multiplier is practical in work, widely used in phase‑locked loops, signal processing power of mixers, filters..
  • 【Quality Assurance】The product is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception

  • Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
  • RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
  • Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
  • Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
  • Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..
Check Stock

BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Transparent)

  • ❤【Function of Filament Detection Module】 To detect Filament in 3D printer run-out,pause detection,it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material..
  • ❤【Filament Break Detection Module】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed..
  • ❤【Detection Method】The material detection module uses the level jump detection method..
  • ❤【Filament Size】 It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved..
  • ❤ 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request..
Check Stock

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
  • Used with other motherboards: The material detection module uses the level tra....
Check Stock

Brite Strike Camp Perimeter Security System, Survival Signaling System, Complete Emergency System for Hunters, Campers, Hikers, Fishermen, BSTCAPSS

  • The camp alert perimeter security system and survival signaling system is a complete survival emergency system for hunters, campers, hikers, and fishermen..
  • works as a perimeter security system that will alert you if anyone or an animal wanders into your camp ground. The alarm module can be used as an audible emergency device to let passers-by know you need help..
  • alarm module has bright flashing blue leds that can be used as a signaling device at night. It also has a red led flashlight built in for map reading that will not destroy your night vision..
  • The CAPSS3 kit comes with two apals (all purpose adhesive light strips). the apals have a polished aluminum front that can be used as a small signaling mirror in the daytime..
  • repellant security camping security mountain lion bear alarm rescue signal signal bobcat system protector camp camping.
  • 135 db alarm module with built in red led flashlight and side blue leds for signaling. (Note: peel off backing with 3M adhesive for mounting).
  • Two blue led apals with polished aluminum surface for signaling day or night.
  • Two nylon zip ties for securing alarm module to a branch or stake.
Check Stock

HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5

  • Module with a ceramic antenna, superior signal.
  • Save the configuration parameter data EEPROM Down.
  • Default baud rate: 9600, Interface: RS232 TTL.
  • Compatible with a variety of flight control module.
Check Stock

DISH MT2 OTA MODULE [Electronics]

  • An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver.
  • View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide..
  • An OTA antenna must be installed to use the Module..
  • A satellite signal and a DISH Network programming subscription is required to operate the OTA module..
Check Stock