ReviewsPei Sheet Prusa Mk3s

Upgrade Plated Wear Resistant M6 Thread Brass Nozzle Pack 0.4mm for 1.75mm V6 Hotend Titan Aero Extruder Prusa I3 MK3 MK3S Anycubic I3 Mega S/Zero 2.0 / Vyper 3D Printer 4x0.4mm

  • Nozzle size: 0.4mm, M6 thread for 1.75mm filament use.
  • The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle....
  • Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when....
  • Compatible with V6 V5 hotend, Ultimaker 2+ olsson block hotend, Prusa i3 Mk3 mk3s Anycubic I3 Mega 3D Printer.
Check Stock

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 220mmx220mm 8.7 x 8.7 with Premium Adhesive 0.5 Grid for 3D Printers MK2 MK2A MK3 Anet A8 Anet A6 Pack of 4

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for....
  • easy to use/Easy to clean: simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.....
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives.....
  • No Edge Curling/Strong adhesion: The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges....
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

PEI Sheet Magnetic Bed Flexible Spring Steel Platform with 3M Adhesive, 220x220mm(8.66 8.66inch) for Anet A8, A6, Robo R2, Wanhao Duplicator6, Duplicator i3 Monoprice Maker 3D Printers.

  • ...ple Prints】: Prints easily moved if bend the Magnetic plate when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new..
  • 【Practical Features】: Flexible, removable, high strength and heat resistance, good adhesion to PLA and ABS,220x220mm PEI sheet size is suitable for Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus Monoprice Maker and similar size 3D printers..
  • 【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a quality problem, just tear it off, it will not affect the use.If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours..
Check Stock

FYSETC Display Screen SD-W-I-F-I with Card-Reader Direct BTT Wireless Cloud Transmission Module for Prus MK3S TFT35 V3.0 Ender 3 SKR Mini E3 3D Printer

  • Wireless transmission: a W-i-f-i-SD card adapter, Only supports 2.4G network, make sure the adapter and PC/Mac terminal connecting to the Same Network. Please note:Comes with a 8G card( detail user guides) in the package, not for using.Install is a little complicated, please reference the more information and other customers voice..
  • Usage: Make sure have a CH340 USB driver(search: FYSETC/CH340-Driver on Github) and a Arduino IDE software/Pronterface (Pronterface forces all caps, not good if SSID/PW has lowercase). Please refer to the product description at bottom for more details. Note: *Adjust the baud rate to 115200*on Arduino..
  • Based on ESP8266's low-power UART-W-I-F-I chip module. About the firmware. please search Github:FYSETC/ESPWebDAV..
  • Features: Maximum support 32GB of SD card.
  • The adapter uses a DHCP connection, please map its address as static in your DHCP server. Has the ability to operate in 802.11 B/G/or N modes. It is set to the "N" mode by default. To change modes requires modifying the firmware and re-flashing the device using the free Arduino IDE software..
  • Suitable for 24V 3D printer, such as Prusa MK3S,TFT35 V3.0, Ender 3,SKR Mini E3 V1.2 V2 etc. Need more help please email us, we will give you help within 24 hours..
Check Stock

220 X 220mm Double sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate with Magnetic Base for robo r2 Anet A8 A6, Robo R2, Wanhao Duplicator6 / i3 / Voxelab Aquila 3D Printer

  • This will be an incredible product ,It allows you to experience unparalleled happiness when you pick up your pieces..
  • Due to the size of the product is huge. In order to control the strength of the bend. We maintain a relatively thin thickness. So it is not flat when it is not magnetically adsorbed. When it is placed in a magnetic bed, it will be magnetically adsorbed so that it will automatically flatten..
  • Warning: Do not print directly on the magnetic base surface,you need sprint steel sheet with PEI coating on it. Magnetic Base continuous working temperature must below 105C..
  • Package: 1piece Doubeld sided Textured PEI powder coated spring steel sheet + 1piece Magnetic base..
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol ....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

Prusament Prusa Galaxy Black, PLA Filament 1.75mm 1kg Spool (2.2 lbs), Diameter Tolerance +/- 0.02mm

  • Manufactured in-house by Prusa Polymers - We were not satisfied with the quality of filaments on the market. So we decided to make our own. As a part of Prusa Research companies group, we are the only 3D printer manufacturer with its own filament production..
  • Premium-grade materials and thorough testing - The whole manufacturing process is closely monitored and tested – string diameter, color consistency, and mechanical properties – to make sure that every spool is perfect..
  • High Quality you can check yourself - We are the only manufacturer that gives customers the option to fully inspect parameters of every filament spool. Just scan a QR code on the spool to see all details online..
  • 0. 02 mm Manufacturing Precision - We believe the industry standard of 0. 05 mm isn’t sufficient for perfect 3D printing. Instead, we 0. 02mm precision and highly-consistent colors in our filaments..
  • Prusa Galaxy Black is inspired by the frame of our Original Prusa i3 printers..
Check Stock

ELEGOO Neptune 2S 3D Printer FDM Printer with Dual Gear Metal Extruder PEI Surface Magnetic Build Plate 3.5 Inch Touch Screen Silent and Quality Printing 220x220x250mm Printing Size

  • All-metal Dual Gear Extruder - Neptune 2S is upgraded to long-lasting dual gear Bowden extruder, providing smoother feeding of filaments, reducing....
  • PEI Sheet Magnetic Plate - Flexible steel build plate covered with PEI surface enables filaments to nicely adhere to the plate without glue, prints....
  • Aluminum Leveling Nuts - Made of high quality aluminum, the nuts are much durable than the plastic ones. Large torques and powerful die springs make....
  • Smart and Silent Printing - Filament detection sensor will pause printing when run out of filament, and can resume printing from the last position.....
  • What You Will Receive - You will receive ELEGOO Neptune 2S 3d printer kit, 4 nozzles and 2 joints as bonus, and professional technical support from....
Check Stock

Wisamic Borosilicate Glass Plate Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, etc

  • 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use..
  • Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface..
  • High binding power when heating. Easy to separate the plastic parts when cooling..
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage..
  • Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, etc.
Check Stock

Official FLSUN V400 3D Printer Fast 400mm/s 8000+ mm/s² FDM Delta 3D Printer with Pre-Installed Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ300x410mm

  • ..., Especially suitable for printing with flexible consumables and hard consumables such as PLA. Bi metal 300℃ high-temp nozzle, Allow you to choose more kinds of filament like PLA PLA+ WOOD TPU ABS PETG PC NYLON(NEED DRIED)..
  • 【Auto-Leveling System & Steel Spring PEI Sheet Bed.
  • 】 FLSUN V400 upgrade automatic leveling system with a 25-point smart and precise calibration, easy to start printing.Steel spring PEI sheet bed,The bonding is more firm and the model is easy to take..
Check Stock