ReviewsPerformance Coilover Camber Plates

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

  • Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
  • Camber gauge with fixed graduation from +5 to -5.
  • Adjustable caster gauge graduated +11 to -3.
  • Kingpin gauge graduated from 0 to 14 left to right.
  • Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
  • Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..
Check Stock

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

  • Fully threaded dual tube advanced shock absorber.
  • Adjustable camber plates (3 degrees camber adjustment).
Check Stock

Godspeed MRS1432-A Godspeed MRS14320-A MonoRS Coilover Suspension Lowering Kit, 32 Damping Adjustment, Ride Height Adjustable, compatible with Toyota Camry SE/XSE (XV70) 2018-21

  • Compatible With Nissan 350Z (Z33) 2003 2004 2005 2006 2007 2008 2009.
  • TRUE COILOVER CONVERSION FOR REAR STRUTS.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

VEVOR Wheel Alignment Tool, Toe Plates without Probes, Aluminum Alloy Toe Alignment Plates, Double 16ft Tape Measures Alignment Tools Automotive, Wheel Alignment Tool Gauge Camber Caster

  • HIGH FUNCTIONALITY: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • DURABLE STRUCTURE: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • STAND OFF WHEELS: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • MASTERFUL SLOTS: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • UNRESTRICTED USE: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

Rev9 R9-HS2-008_2 Hyper-Street II Coilover Suspension Lowering Kit Mono-Tube Shock w/ 32 Click Rebound Setting Full Length Adjustable compatible with Infiniti G35 Coupe V35 2003-07

  • Compatible With Infiniti G35 Coupe (V35) 2003 2004 2005 2006 2007.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount //....
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To....
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
Check Stock

VEVOR Wheel Alignment Tool, 4 Probes Toe Plates, Double 16 ft Measure Tapes, Stands Off Alignment Tools Automotive, Aluminum Alloy Toe Alignment Tool, Wheel Alignment Tool for Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Masterful Slots: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you ....
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand Off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
Check Stock