ReviewsPerformance Intake Manifold Gasket

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit (Studs, nuts, and washers.) , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder

  • ★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
  • ★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
  • ★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
  • ★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
  • ★ ATTENTION- 100% product quality assurance. Please feel free t....
Check Stock

Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily.
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM.
Check Stock

GY6 50CC 49CC Carburetor with Electric Choke for 4 Stroke Scooter Moped 139QMA 139QMB Taotao Engine PD18J Carb with Intake Manifold Air Filter kit

  • GY6 50cc Carburetor with 2-pin Male Electric Choke 18mm Intake Manifold.
  • GY6 50CC Carburetor comes with a #75 Main Jet. upgraded jets for better starting, idling and performance..
  • Size:Intake Manifold Side:18mm(Inner Diameter),28mm(Outer Diameter).
  • Air Filter Intake:35mm(inner diameter),39mm(Outer Diameter) ..
  • This is a 18mm Intake Carburetor,it fits most 4 stroke GY 49CC 50cc 80c 139QMA 139QMB Engine scooters carb, such as Taotao Baja, JMstar, Jonway,....
  • Package include: 1x Carburetor,1x Air Filter,1x Fuel Filter,1x Plug Spark,1x Intake Manifold,2 xGaskets..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number:3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock