ReviewsPerformance Motor Mounts

RC Car Time: Journal With Remote Controlled Car I 110 Pages I lined I 6×9″

  • READY-TO-RUN: Perfect RC truck for beginners, built for exciting bashing speeds and extreme, all-terrain durability..
  • DESIGNED TOUGH: New features to enhance its unstoppable performance include a stronger chassis and retained hinge pin plates.
  • a castellated slipper pad and sliding gear mesh.
  • and rubber shielded bearings throughout..
  • ADJUSTABLE: Ride height and body mounts for easy component access and maintenance.
  • SUPERIOR PERFORMANCE: This monster RC truck delivers a thrilling combination of ARRMA toughness, street truck style and 50+ mph speed capability..
  • INCLUDES: Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger..
  • NEWLY UPDATED: With a Spektrum SLT3 radio, Firma brushless motor, tougher chassis, wider stance, stronger steering servo and more..
Check Stock

Continental Fan Axial Exhaust Fan, 500 CFM

  • Very quiet bathroom fan (1.5 sones) and Strong air movement (90CFM) for bathroom up to 90 Sq. Ft. Recommened for use in medium room..
  • Housing size: 9.3in x 9.3in x 7.3in with 4in duct, ceiling mounting Opening: 9.4in x 9.4in x8in...
  • Low profile white grill cover, Need to be installed in the attic and It can attaching the fan housing mounts to the ceiling joists (spacing between16 in.- 24 in) using suspension brackets..
  • UL and HVI certified for performance assurance.Acceptable for use over a bathtub or shower when installed in a GFCI-protected branch circuit..
  • 2 year limited product warranty.Efficient and quiet,excellent motor perfomance,.
Check Stock

M8 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts, Rubber Cylindrical Vibration Isolation Mount, for Air Compressors, Garage Motor, Diesel Engines(with Non-Slip Nuts,4 Packs)

  • STRONG QUALITY →Material: Metal+Rubber；Made of Durable Rubber (high durometer) and steel zinc coating，Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
  • SIZE → SIZE → Please refer to the details page for specific sizes.
  • The nuts is M8 and universal in size and compatible with most device..
  • REDUCING NOICE→The Rubber Mounts with Studs and Nuts M8, which used to reduce noise and shock absorption - Supports up to 266lbs for all 4 pcs..
  • EASY INSTALLATION→all you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories..
  • WIDELY APPLICATION→ Design to shock absorption of Heavy duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc..
Check Stock

ADVANCE IGNITION Engine Swap Mount New Compatible with Acura Honda 92-95 Civic 94-01 Integra K Series K20 K24 DC2 EG6 DC 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001

  • Advance Ignition engine motor & transimission mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications..
  • Rubber durometer matches OE ensuring maximum occupant comfort due to minimal transfer of vibration frequency at all engine RPM's..
  • Offer maximum durability and precise performance, all parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration..
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail..
  • We process and ship your order in one business day.Our commitment to you is total and we want you to always be 101% satisfied by the quality and efficiency of our service..
Check Stock

Orion 7826 EQ-1M Electronic Telescope Drive

  • Precision mini-motor attaches to your Orion EQ-1 equatorial mount to allow motorized tracking of celestial objects.
  • Motor drive provides regulated sidereal-rate tracking in right ascension.
  • Hand controller has 2x and 8x speeds and pause mode.
  • Includes motor, controller and battery case. Runs on four D-cell batteries (not included).
  • Fits Orion EQ-1 equatorial telescope mounts.
Check Stock

Phanteks 140mm CPU Cooler Fan Upgrade, PWM, 1600 RPM High-Static Pressire Retail Cooling PH-F140HP_WT2 White

  • The new redeveloped blades in PH-F140HP II are bigger and designed to achieve higher air pressure. The redesigned MVB II blades generate better airflow and produces better performance.
  • The PH-F140HP II has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F140HP II..
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • SSC provides an increase in the bearing’s lifespan and ensures that the fan’s axis is consistently operational and quiet..
  • PH-F140HP II’s PWM functions allow users to adjust speed from 500 – 1600 RPM. Higher speed for performance and lower for silent operation by motherboard control..
  • PH-F140HP II produces high static air pressure allowing for a direct and focusing airflow making them ideal for ....
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock

M10 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts,Rubber Cylindrical Vibration Isolation Mount ,for Air Compressors, Garage Motor, Diesel Engines(with Non-slip nuts,4 Pack Double stud)

  • SIZE → Rubber Size:1.57''(Dia)x 1.18''(H)；Thread Size：1.06"(Dia) x 0.39" ( H)；Overall Height：2.24''；The nuts is M10 and universal in size and compatible with most device.
  • STRONG QUALITY →Material: Metal+Rubber；Made of Durable Rubber (high durometer) and steel zinc coating，Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
  • REDUCING NOICE→The Rubber Mounts with Studs and Nuts M8, which used to reduce noise and shock absorption - Supports up to 266lbs for all 4 pcs.
  • EASY INSTALLATION→all you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
  • WIDELY APPLICATION→Design to shock absorption of Heavy duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc.
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

M8 Rubber Studs Shock Absorber Anti-Vibration Isolator Mounts,Rubber Cylindrical Vibration Isolation Mount ,for Air Compressors, Garage Motor, Diesel Engines(with Non-slip nuts,4 Pack Double stud)

  • SIZE → Rubber Size:Please refer to Figure 2 and Figure 3 for product size1.18''(Dia)x 0.79''(H)；Thread Size：0.91"(Dia) x 0.31" ( H)；Overall Height：2.6''；The nuts is M8 and universal in size and compatible with most device.
  • STRONG QUALITY →Material: Metal+Rubber；Made of Durable Rubber (high durometer) and steel zinc coating，Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
  • REDUCING NOICE→The Rubber Mounts with Studs and Nuts M8, which used to reduce noise and shock absorption - Supports up to 166lbs for all 4 pcs.
  • EASY INSTALLATION→all you have to do is to place the devices holes in the screws and fasten the nuts of the Mounts, Set includes all anchoring accessories.
  • WIDELY APPLICATION→Design to shock absorption of Heavy duty Mini Split Heat Pumps，Air Compressor, Garage Door Lift Motor, Harvester, Generator, Water Pumps, Gasoline Engines etc.
Check Stock

Erickson 07708 Steel Truck Rack, Telescoping, 250lb Rated

  • Bolt-on base securely mounts rack to cargo bed.
  • Black powder coated paint ensures no rusting.
  • Compatible With Vehicle Type: street-touring-motorcycles.
Check Stock