ReviewsPeripheral Module

Waveshare Mini-Computer Add-ons Based on Raspberry Pi Compute Module CM3 / CM3L / CM3+ / CM3+L Comes with PoE Expansion Board

  • The Add-Ons Include: Expansion Board, Metal Case, Power Supply, And Cooling Fan. Easily Make A Mini-Computer If You Happen To Get A Compute Module.
  • Compute Module PoE Board: Dual CSI Camera Ports, PoE (Power Over Ethernet) Feature, Versatile Peripheral Interfaces.
  • Ingenious Cut-Out, Highly Matching The Master Board, Along With Clear Labels, Easy To Use.
  • Comes With Cooling Fan, Allows Being Controlled By Software Via GPIO, Or Being Powered Directly From 5V Supply.
  • Smooth And Clean Metal Bottom Surface, With Mounting Holes On Both Sides, Suitable For Industrial Applications.
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

Module A9G Board, A9G Development Board GSM/GPRS + GPS/BDS Module Wireless Data Transmission + Positioning Board

  • ★[A9G Development Board] – The A9G development board is a versatile development board based on A9G GPRS / GSM + GPS / BDS module that can be used to validate the basic communication functions and peripheral functions of the A9G module..
  • ★[Multifunction] – A9G development board with the basic phone / SMS, GPRS networking communications, GPS / BDS dual-mode positioning capabilities..
  • ★[Specification] – A9G development board contains a lithium battery charging management, microphone, speaker interface, USB communication interface, multiple user keys / led, TF card slot, accelerometer, I2C2 interface, ADC interface..
  • ★[External Interface] – A9G development board camera expansion board, an external 30W / 200W camera.A9G development board coin machine expansion board, can be external traditional coin machine..
  • ★[After-Sale Service] — Good day. every effort to provide customers with satisfactory service.If you have ANY questions, please email us and BELIEVE us, we will reply you soon..
Check Stock

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

  • 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
  • Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
  • RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
  • 2x20pin expansion pin header, pin height 10mm/0.39".
  • Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
Check Stock

AITRIP 2PCS PN5180 Module NFC Module Supports ISO15693 RFID HIGH Frequency IC Card ICODE2 Read and Write Module

  • 2PCS PN5180 NFC RF I Sensor ISO15693 RFID High Frequency IC Card ICODE2 Reader Writer.
  • PN5180 supports card emulation and PEER TO peer mode, NFC chip..
  • PN5180 can support more cards with different protocols (ISO / IEC 18092.14443 A / B, FeliCa, 15693).
  • Module uses serial peripheral interface SPI.
  • Application：Pay，Physical access control，E-government，Industrial control.
Check Stock

Ignition Coil Module, Pulse Generator High Voltage with Pulse Generator for Replacement for Electronic DIY for Product Development

  • It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science..
  • After the input of dc 3.0V-6V voltage, a dc high voltage of about DC200KV(about 1.5 cm of arc) can be obtained at the output end..
  • According to the coil principle, the module outputs high voltage pulse current, small volume and high efficiency..
  • The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge is violent..
  • Used for high voltage production, electronic DIY, product development, high voltage electronic security, etc.
Check Stock

Wireless Motion Remote Controller Gamepad for Wii/ Wii U, w/ Silicone Case & Hand strap (Pink)

  • Game Remote Controller( Without Motion Plus ): Compatible with Wii and Wii U consoles, EASY SYNC STEPS.
  • Remote for Wii / Wii U: Built-in COMS sensor for detecting infrared light from sensor bar, obtain light-spot moving info, provide Bluetooth target movement info, and support sensitivity switching function for the Wii console.
  • Remote for Wii / Wii U: Built-in sound module to convey induction sound from Wii console to speaker, Built-in speaker for sound output, Built-in motor for providing vibration sensing feedback function.
  • Wireless Remote for Wii / Wii U: Bluetooth connection with range up to 8 meters. With an extension terminal for connecting nunchuck or other compatible peripheral devices.
  • Wireless Controller Set for Wii / Wii U: Package Contains -- 1 X Remote for Wii/ WII U (Batteries NOT included) 1 X Hand strap 1 X Shockproof Silicone Case.
Check Stock

Wireless Remote Controller Gamepad Joystick for Nintendo Wii/ Wii U, w/ Silicone Case & Hand strap (Red)

  • Game Remote Controller( Without Motion Plus ): Compatible with Wii and Wii U consoles, EASY SYNC STEPS.
  • Remote for Wii / Wii U: Built-in COMS sensor for detecting infrared light from sensor bar, obtain light-spot moving info, provide Bluetooth target movement info, and support sensitivity switching function for the Wii console.
  • Remote for Wii / Wii U: Built-in sound module to convey induction sound from Wii console to speaker, Built-in speaker for sound output, Built-in motor for providing vibration sensing feedback function.
  • Wireless Remote for Wii / Wii U: Bluetooth connection with range up to 8 meters. With an extension terminal for connecting nunchuck or other compatible peripheral devices.
  • Wireless Controller Set for Wii / Wii U: Package Contains: 1 X Remote for Wii/ WII U (Batteries NOT included), 1 X Hand strap, 1 X Shockproof Silicone Case.
Check Stock

Ingcool Raspberry Pi Pico Senser Kit, Raspberry Pi Pico Microcontroller Board with Flexible Digital Interfaces,Based on RP2040 Microcontroller Chip,Include Humidity,Color,Liquid Sensors

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz.
  • 264KB of SRAM, and 2MB of onboard Flash memory.Castellated module allows soldering direct to carrier boards.USB 1.1 with device and host support.
  • Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.
  • 26 × multi-function GPIO pins.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • Accurate clock and timer on-chip.Temperature sensor.Accelerated floating-point libraries on-chip.
Check Stock

Mini-Computer Based On Raspberry Pi Compute Module 4,Include Waveshare CM4-IO-BASE-A (Mini IO Board Lite Verson),Metal Case,Cooling Fan

  • Mini-Computer Based On CM4 Designed For Raspberry Pi Compute Module 4,Waveshare CM4-IO-BASE-A (Lite Ver.) Inside, Fast And Easy To Build A Mini-Computer.
  • Waveshare Mini IO Board (Lite Ver.) Inside.Make It Easy To Build Your Own Raspberry Pi CM4 Mini PC.Wall Mount Holes On Two Sides, Handy For Mounting.
  • Rich Peripheral Connectors.Onboard Connectors IncludingCSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot.
  • Precise Cut-Out With Clear Label.Each Cut-Out Is Completely Aligned With The Connector.
  • Cooling Fan Included.Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation.
Check Stock

FoxAlien Reizer 20W Desktop Laser Engraver Compressed Spot 32-bit Laser Engraving Cutter Machine for Wood MDF Ceramic Acrylic Metal 15.75x15.75 inches Large Work Area

  • 【0.08*0.12mm Laser Dot, 5W Optical Output】FoxAlien Reizer laser engraver equips with a 20W laser module (5W optical output). With the advanced....
  • Stable, Fast & Smooth】Reizer laser machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably....
  • 【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality....
  • 【Various Peripheral Products for Upgrade】15.75x15.75 inches (400x400mm) large engraving area meets daily DIY needs. Reizer is available for....
  • 【Wide Software Compatibility & Applications】FoxAlien Reizer is compatible with GRBL software, including Lightburn and Lasergrbl and supports file....
Check Stock