ReviewsPermanent Bond

Ready America 33111 Museum Gel Clear

  • ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces.
  • ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil.
  • ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour.
  • With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.
  • Great for tile, most plastics, ceramic, glass, wood and metal.
Check Stock

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.

  • JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
  • VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock

Loctite Heavy Duty Epoxy Gel, Quick Set, 0.85-Fluid Ounce Syringe (Pack of 8)

  • 【Good Bonding Strength】This metal repair paste forms a strong and stable permanent bond, which can last a long time. According to different uses, it can be shaped, tapped, filed, sanded and drilled..
  • 【Effective Adhesion】Form a strong and stable permanent bond, this metal repair paste can provide a strong and long-lasting repair to metal and multiple other surfaces. It can bond almost any clean surface without dirt and oil..
  • 【High Temperature Resistance】Can withstand temperatures up to 150°C. After fully cured, it is as hard as iron and provides a uniform adhesive layer thickness..
  • 【Multi-purpose】This metal repair paste is mainly used to fill casting defects such as steel casting, sand holes, pores, and cracks. It can also be used to repair fuel tanks, pipelines, concrete cracks, etc..
  • 【Easy to Apply】Simple drying application programming. It is simple and convenient. Just mix, apply and let it dry for a few hours. Full curing time is up to 24 hours..
Check Stock

Tear Mender Instant Fabric And Leather Adhesive, 16 Oz Bottle, Tg-16

  • INSTANT DURABLE BOND: Adhesive dries and forms and instant bond that is flexible and usable/wearable within 3 minutes and washable in 15 minutes.
  • DURABLE HOUSEHOLD REPAIRS: Forms a long lasting and permanent bonds to fabric and leather that is waterproof, flexible and UV resistant.
  • NON-TOXIC FORMULA: Formulated with natural latex the glue is acid-free and non-toxic.
  • QUICK AND EASY REPAIRS WITH PERMANENT RESULTS: Application requires no heat, ironing, or solvents to cure.
  • USE INDOORS AND OUTDOORS: Ideally suited for repairs on clothing, leather, upholstery, home décor, sport/marine gear and more!.
Check Stock

VOC Compliant Adhesive, 35LV, 1/2 pt.

  • Price For: Each Characteristics: Permanent Flexible Bond Over A Wide Variety Of Substrates Substrates: Virtually All Porous and Non-Porous Substrates Functional Cure: Solvent Evaporation, Can Be Thermoset Shear Strength: Greater Than=1200 PSI HP-131 Nitrile Item: VOC Compliant Adhesive Size: 1/2 pt. Work Life: Permanent Flexible Bond Green Environmental Attribute: RoHS Compliant.
  • VOC Content: 2.03 lb. per gallon (SCAQMD Rule 443/443.1) Application: Roll Coating, Knife Coating, Brushing Color: Tan Specific Gravity: 0.8895 Type: General Purpose, 35LV Viscosity: Brookfield RVT Spindle No. 3 @ 20 rpm 6500 +/-3500 cps Standards: Conforms to MMM-A-189 Type 3 Material: Nitrile Rubber, Phenolic Resin Bonding Range: 40 Degrees to 100 Degrees F Temp. Range: -30 Degrees to 325 Degrees F.
  • Country of Origin (subject to change): United States.
Check Stock

Tear Mender Instant Fabric and Leather Adhesive, 2 oz Bottle, TG-2

  • Instant durable bond: Adhesive dries and forms and instant bond that is flexible and usable/wearable within 3 minutes and washable in 15 minutes.
  • Durable household repairs: Forms a long lasting and permanent bonds to fabric and leather that is waterproof, flexible and UV resistant.
  • Non-toxic formula: Formulated with natural latex the glue is acid-free and non-toxic.
  • Quick and easy repairs with permanent results: Application requires no heat, ironing, or solvents to cure.
  • Lifespan of product will deteriorate in extreme cold temperatures.
  • Must store in room temperature or warmer.
  • Once opened, do not store in cold temperatures.
Check Stock

VELCRO Brand for Fabrics | Iron On Tape for Alterations and Hemming | No Sewing or Gluing | Heat Activated for Thicker Fabrics | Cut-to-Length Roll, 24 in x 3/4 in, Black

  • HEAT ACTIVATED FABRIC TAPE: For thick fabric alterations and hemming, this heat activated application allows the cloth tape to securely and permanently bond to heavier fabrics.
  • FOR DIFFICULT TO SEW FABRICS: Simple to use cut-to-length roll, peel off the protective backing and position on fabric, iron with the fastener side faced down, allow adhesive bond to set for 24 hours to achieve full strength.
  • PERMANENT BOND: A strong iron on hem tape that provides a permanent bond to mend curtains or hem pants, dresses, or jeans.
  • BONDS TO HEAT TOLERANT FABRICS: Designed for use on cotton blends, polyester, fleece, suede, denim, and nylon.
  • be sure to use a press cloth for delicate fabrics.
  • MACHINE WASH OR DRY CLEAN: Created to withstand laundering for long lasting use, close fastener and simply wash in cold or warm water only (not recommended to launder in hot water).
Check Stock

3M Hi-Tack 76 Spray Adhesive, Clear, 18.1-Ounce

  • Fast tack, fast grab, low soak-in adhesive.
  • Formulated to bond polyethylene to itself, concrete block, wood and many hard-to-bond surfaces.
  • It may also be used to bond paper, cardboard, fabric, urethane foam, foil, metal, wood, and most plastics to itself and a variety of other substrates.
  • Can be used either for permanent or temporary bonds.
Check Stock

Casting Repair Glue, High Temperature Resistant Liquid Metal Welding Filler, Metal Repair Glue for Metal Casting Defect (80g)

  • Warn: The adhesive is now slightly hardened due to generally cooler temperatures in most areas.If the glue is hardened after receiving it, you can soak the A tube glue in hot water for a while, and then take it out for use after the glue becomes soft. If you are not satisfied with the product, we will return it for you for a refund..
  • High-Temperature Resistance: A+B repair glue can withstand temperatures up to 150°C.When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • Long-lasting Bond Strength: It forms a strong and stable permanent bond that should last for ages.Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years.It can be shaped, tapped, filed, sanded and drilled depending on its purpose..
  • Simple to Use: The preparation and application are simple and easy,Just mix, sets in minutes, and fully cured in 4-6 hours..
  • Surface Application: Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.Mainly used for iron and steel casting, sand holes and pores,Also can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more..
Check Stock

3M Double Sided Tape Heavy Duty: Mounting Tape Converted from 3M VHB 5952, (1 in x 15 ft) Super Strong Foam Tape for Outdoor and Indoor

  • Fast and easy-to-use permanent bonding method provides high strength and long-term durability in highly demanding applications.
  • This is the right tape for car body work. Very strong hold for attaching exterior parts to the car’s paint, such as spoilers, stainless trim, aluminum louvers for rear windows, vent visors, door moldings. This super strength heavy duty tape is converted from 3M VHB Tape 5952. It comes with Box Cutter (1PC) and Razor Replacement (2PCs). Easily cut to any size and length you want..
  • Application of 3M 5952: For building operations such as heat insulation, connection, bundling, amendment, sealing and signs. The processing and assembly of electronic and digital products, home appliance. The adhesion of advertisement board, LED plate, moldings, door edge, body side moldings, stainless steel, ABS and PVC rocker panels, wheel lip, nameplate and decoration bar for automobiles.
  • The 3M VHB Foam Tape can not only replaces Rivets, Spot Welds, Liquid Adhesives and other permanent fasteners but also provides convenience and simplicity for use many interior and exterior bonding application..
  • 3M mounting tape viscoelastic in nature which gives the foam energy absorbing and stress relaxing features. 50% strength of bond in 20 minutes, 90....
Check Stock

3M Double Sided Tape Heavy Duty: Mounting Tape Converted from 3M VHB 5952, (0.25 in x 15 ft) Super Strong Foam Tape for Outdoor and Indoor

  • Fast and easy-to-use permanent bonding method provides high strength and long-term durability in highly demanding applications.
  • This is the right tape for car body work. Very strong hold for attaching exterior parts to the car’s paint, such as spoilers, stainless trim, aluminum louvers for rear windows, vent visors, door moldings. This super strength heavy duty tape is converted from 3M VHB Tape 5952. It comes with Box Cutter (1PC) and Razor Replacement (2PCs). Easily cut to any size and length you want..
  • Application of 3M 5952: For building operations such as heat insulation, connection, bundling, amendment, sealing and signs. The processing and assembly of electronic and digital products, home appliance. The adhesion of advertisement board, LED plate, moldings, door edge, body side moldings, stainless steel, ABS and PVC rocker panels, wheel lip, nameplate and decoration bar for automobiles.
  • The 3M VHB Foam Tape can not only replaces Rivets, Spot Welds, Liquid Adhesives and other permanent fasteners but also provides convenience and simplicity for use many interior and exterior bonding application..
  • 3M mounting tape viscoelastic in nature which gives the foam energy absorbing and stress relaxing features. 50% strength of bond in 20 minutes, 90....
Check Stock